# sf_cxt_cd

description:
Mosaic tessera. Faint tool marks visible. No mortar or plaster visible. Rectilinear. 2 long faces, scored by a line across (straight). Breaks across short top and bottom faces.


description:
Stone spindle whorl. Broken in half vertically along the center hole. Bottom has also flaked off. Extant top has smooth edges. Stone is a dark gray hue.


description:
Conical bone pin. Very polished. Top 1.1cm is scored across by three incised rings. Top is rounded, not flat.


description:
Bronze lamp. Handle joint visible on back, but corroded orange. Part of handle also present. Lamp body oxidized green. Spout is turned back and melted or crushed into the body. Possibly was quatrefoil lamp - edges slightly rolled in on top, two corners pinched. Dwg on reverse of paper form.

notes:
May not be intact - difficult to tell prior to conservation.


description:
Fragmentary bronze object of unidentified form and function. Very corroded, heavily oxidized. A narrow whitish ube runs through the center fo the corrosion, broken off insome places. In 4 pieces.


description:
Slightly rounded, flat, bronze object of i\unidentified function. Breaks equally weathered to surfaces. Some green oxidizing, some mineral deposits.


description:
Broken cronze coin. Heavily oxidized and encrusted. Oxidizing  and build up in break match body. To the touch, a rim is evident on at least one side. No other marks visible.


description:
Cut marble. One face smooth, reverse and sides rough. One end slightly damaged (point missing). Smooth face bears 2 long scratches down the face, right of center. A rough cross is cut deeply into the center (2.1cm x 1.3cm). Sketch on manual form.


description:
Conical orange-clay spindle whorl. Bottom 0.7cm are even and rounded, then the whorl tapers for 0.7cm. Some minor mineral deposits.


description:
Bronze coin. Obverse and reverse heavily encrusted with mineral deposits. Some visible oxidizing. One face bears a depression in the center, approx. 0.5cm in diameter; no trave of it visible on other face.


description:
Oxodized, mineral deposit-coated slag concretion. Heavy. No visible metal except in 1 corner - semi-fresh-break.


description:
Teardrop-shaped gold bead. Hollow. Seam visible all the way around. Hole in top and bottom of teardrop. Indentation on one side of the teardrop quite dseep, corresponding indent on the opposite side, but much shallower. Sketch on manual form.


description:
Biconical spindle whorl. Top chipped off on one side, slght damage to edges abd 1 crack on other face as well. Edge slightly rounded.


description:
Flat round object with a hole in the center, shape reminiscent of a washer. Center is depressed near the hole, the remainder of the object was once flat (no longer is). Green and brown oxidizing. Edges may have been cut into an octagonal shape.


description:
Oxodized slag - hollow and pitted all over.

notes:
11 pieces present, one avg. sized measured.


description:
5 rough faces, one smoothe face. Possibly some plaster adhering. Natural off-white pigment.


description:
Bent iron object - straight iron rod with turned up ends. One tip crusted over, other appears to have a break. Oxidized and encrusted.


description:
Iron tool head, possibly an axe. One part recovered, a smaller iron part discovered in the same location 24 hours later, possibly also part of the same tool. Heavily encrusted with oxidization. Still quite heavy. Wide sharp blade, narrowing almost to a point. At the point, a smaller piece of metal is attached which may have a small opening at the end. No visible breaks.


description:
Round iron socket. Hollow, closed tip. Oxidized orange, metal not visible.


description:
Small clay ball, possibly shot. Some lime scale on one side. Orange clay. No other marks visible. Not perfectly rounded.


description:
Inscribed marble architectural fragment. Fairly pock-marked and damaged (see rubbing on manual form reverse), all letters fragmentary. Inscription on smoothed 4.8cm surface (width meas.) across length. Stone is then cut back 2-3cm and rough on all surfaces. Dwg of inscription on manual form.


description:
Small strip of flat lead, twisted into an "L" shape. Whitening metal. One end appears torn or roughly broken. The other is folded under in a flat loop.


description:
six-sided stone cylinder.  Faces not all equilateral.  No obvious curvature -- straight


description:
Slightly oblong rock crystal pendant. Some minor scratches to the surface, edge is cut to a very obtuse point all around, top is broken off.


description:
Cylindrical metal object. Green oxidizing around one end only, this end is also slightly flattened. Opposite end round. Extire object encrusted with brown and orange oxidization. Heavy. No other marks visible.


description:
Cylindrical curved iron object (half-moon shape) tapering from the center out on both sides. Heavily oxidized (orange and black) and mineral encrusted. No metal or identifying marks visible.


notes:
33 pieces present, one measured at random.


description:
Long narrow metal object, possibly rectangular. Recent break on largest piece exposing oxidizing metal. Two visible spots of green oxidization (on top and bottom). Mostly orange oxidizing.


description:
Orange clay loom weight. Teardrop-shaped, flat on bottom. Hole is 1.8cm from top.


description:
Square-head, square-shaft nail. Broken shaft - in 2 pieces, seems complete.Center of nail, visible in a break, is now hollow. Found oxidized onto a fragment os a child's cranium. Heavily oxidized.


description:
Round bronze bead or pendant with a loop atop. Oxidized green. Light enough to be hollow, though no seam is evident. No other visible marks.


description:
Pyramidal loom weight, flat top.  Top half blackened -- burnt? Hole 1.1cm from top. Top 1.5x1.5cm square. Base 4.3x4.3cm square


description:
Pasta Vitrea bead. Completely opaque. Large hole in center. Very smooth and polished.


description:
Carved [rather, molded or shaped] architectural fragmetn.  Design appears to be a central vegetal motif (symmetrical) framed by bands. Reverse is blank (sketch on original sheet)

definition:
Architectural fragment with plaster (glyphed)


description:
Symmetrically curved iron object with a small break at one end. May show metal inside. Heavily oxidized.


description:
Concial bone tool./ Pointed at end with carving marks all around. Blackened at end, entire surface highly polished.


notes:
Largest piece measured. Measurements taken with wood in plastic owing to fragility.


description:
Bronze "hook." Both ends appear broken, but breaks are not recent.


description:
Heavily oxidized bronze object of unidentified form and function.


description:
Bronze coin with bronze oxidizing. Obverse bears a design like an anchor or rho-omega monogram. Reverse appears to have been blank. Rim is evident only on the obverse.See sketch on manual form.


description:
triangular whetstone (?).  Smooth on all surfaces with a break at one end.  No other marks or design.


description:
bronze coin with rho-omega monogram on obverse, blank reverse. Some nicks and chips out of edge, Rim on obverse only. Oxidized.


description:
fragment of a stone mortar.  Interior very smooth, exterior very rough


description:
Tapering cylindrical iron object. Crack visible the length of the shaft. Break at narrow end less old than object, but partly oxidized.


description:
fragment of a ginding stone.  One face smooth, sides and top rough


description:
Round fish bone. Small nick out of edge. No marks or signs of work visible.


description:
Slightly curved flat iron bar with a square head/square shaft nail through the rounded end. Fresh break at the flat end, metal and rust visible inside. Found inside the wall, perhaps contemporary with the floor.

definition:
Iron strap with nail (context may be contemporary with floor - found inside area of wall)


description:
Worked bone fragment. Stippled upper face. Fresh break visible. Blackened inside break. Edges have a series of width-wise incisions across.


description:
Oxidized bronze ornament. Round with a top loop. Hole in bottom, cracking along center seam (hollow). Top Loop broken. Seam visible around body.


description:
small worked stone piece, possibly a quern (high sides sloping into a depressed center).  Rim edge finished (regular), no other sides finished. Bottom is not flat. Stone is extremely weathered and pitted.


description:
Worked stone block; finished on upper and lower surfaces, not sides; 2 scars along one unfinished side (long parallel deep scrapes); one finished face is uneven, other slopes inward


description:
Stone tessera. Ivory Colour. No evidence of pigment. 5 rough faces, 1 finished.


description:
Oxidized bronze ornament. Round and hollow bead with a top loop (see sketch on manual form). No visible seam.


description:
Reused stone block - entablature to door jamb? One face has partly destroyed a row of 3 dentals over an ovolo, 2 bands, cavetto, one band. Top has square-ish hole carved in, 9.8x12cm. All other surfaces rough and/or broken.

notes:
No tag attached - loose tag nearby used. `


description:
reused stone architectural fragment (toolmarks visible scarring finished work).  3 faces were once smooth, now cut with toolmakrs except narrow face, which is sloped to 3.4cm from bottom (flat) -- very shallow cavetto? Mortar or plaster on slope, stone blackened in patches.


description:
rough stone block covered in plaster to 1.5cm deep, smoothed and shaped.  Flat on one surface, sloping curve adjacent.


description:
Curved fragment of an arch.  11.7-13-6cm height.  Mortar on bottom face, side faces.  Tool marks visible in places


description:
Heavy bronze bead with bo visible marks. Round body, ovoid loop on top.


description:
Rounded, flat clay bead with hole bored thoguh center. Orange. Not cicular, possibly rounded from square.


description:
Oxidized Bone Ornament. No visible marks. Round body, ovoid top loop.


description:
Heavily oxidized metal object of unidentified function. No breaks or metal visible.


description:
architectural fragment, flat with toothmarks on one face, curved and smoothed on the other face (toolmarks visible on more than half, however).  On narrow faces, 2 faces smoothed, 2 broken or with toolmarks


description:
Heavily oxidized iron ring. Found near SF 2266. No visible attachments, breaks or marks. Some metal visible.


description:
Rectilinear with oblong  hole cut in centre (14.2 x 6.4). Stone is pitted and weatherd


description:
Ring intact, though heavily oxidized. Additional metal attachment is broken, part oxidized onto ring. Some metal still visible. Found in same layer at same depth close to SF 2264 atop a skeleton. Round, not ovoid.


description:
Quarter of a grinding stone.  Pitted and weathered.  Edge present.


description:
Oxidized bronze ornament. Small puncture in 1 side, slightly compressed (making seam visible). Hollow. Round Body with a top loop. ***Thread present in top loop, and possibly 1-2mm of textile as well.***


description:
Glass bracelet fragment painted white. Break is not recent - irisdescent. Stripes twisted along body of bracelet as decoration.


description:
large iron hook, broken shaft. Heavily oxidized. Break no recent. Tapering "J" shaped body.


description:
Gray stone whetstone.  Surfaces smooth, but weathering is beginning to pit them.  Oblong, ovoid


description:
lead bullet -- round, broken in half.  Metal is in good condition with some mineral deposits but no oxidation


description:
Bronze hook, broken on shaft (not recent), blunt top


description:
worked (?) fish ear bone.  Has four stripes across, roughly parallel.  A hole is drilled near one end, through a stripe, back to front

notes:
need faunal analyst's opinion -- probably natural


description:
Round iron buckle. Straight clasp across, sits on top of metal ring, attached to ring by a loop at the end. Loop oxidized orange, remainder oxidized brown. No metal visible.


notes:
of the two pieces present, the larger was measured


description:
triangular fragment of a round architectural detail.  Three 0.7-1.0cm rings are engraved across the surface.  Side partially finished.  Marble? Base smoothed. Also bears engraving, possibly the arm of a cross -- reused? Sides rough


description:
Extremely oxidized iron bolt. Metal cracking and flaking. Long cylindrical top bar, one end broken one tapered. Rectangular attachment at an oblique angle, and 2 slightly better preserved thin iron attachments at right angles to cylinder. Broken ends.

notes:
Height is from broken handle base to top


description:
extremely heavy cannonball fragment. Hollow cannonball; metal oxidizing


description:
square fragment of a marble relief.  Two sides and two sides appear equally weathered.  Reverse is blank.  Toolmarks visible in deeper incisions.  V-shape removed, remainder of block sculptural.  A curved line is present in one corner (circle?) and incisded stripe-spots at the top nearby -- see drawing on reverse


description:
Iron object oxidized on to 2-3 ceramic framents (roof tile?) Oron has a large top, fused to ceramic, and a tpaering shaft. No visible metal. Pointed tip.

notes:
Iron object measurement, not material oxidized


description:
Curved marble keystone with oxidized iron nail in underside and plaster on. Front face stepped, recess 1.7 x 2.5. Smoothed on that face. Others bear tool marks. Top curve has thick layer of plaster/mortar on.


description:
Stone architectural fragment -- keystone of arch? Curved marble block, tapers from 22.3 to 15.5cm, along length.  All faces rough with tool marks; widest (22.3cm) face is finished, with a small recess of 2.2cm at bottom 2.4cm


description:
voussoir fragment; four smoothed faces, two broken


description:
rectilinear stone block.  Two narrow faces smooth, one broken, one rough.  Top and bottom rough; broken in 2

notes:
register entry indicates incised cross, but paper sheet bears no sign of such an id

definition:
Architectural fragment - cross inscribed


description:
large fragment of white stone.  Very soft with appearance of plaster, but does not crumble.  Solid pink line running through white rock.


description:
long rectilinear block of yellow-orange sandstone; all faces rough, some plaster still adhering


description:
pitted sandstone block; mortar; broken, but a few faces still show it was square and flat


description:
one corner of a rectilinear stone block, 5.8cm flat face, rest is sloped inward.  2 faces roughly finihsed.  Surface under 5.8cm flat space has straight line cut across ca 2.1cm from the edge (flat surface hasa an incised line about 4.6cm from the same edge)


description:
rectangular whetstone, gray, with rounded corners.  Broken straight and cleanly across the body.  All surfaces smooth and unblemished.  Slight mineral deposits.


description:
Large piece of a grindstone.  Approximately 1/3 broken off; hole through center, flat on top, conical on bottom


description:
roughly square-cut stone, all faces left rough; bisected across width by a cut channel, 5.4cm across by 4.2cm deep, squared edges.  This in turn is crossed by a rectangular hole, 2.7cm deep by 3.4cm across, 14.9cm in length (including cross-channel)


description:
Worked bone, polished and blackened. Conical, chip removed from top. Tool Marks visible as well as poroous bone matter (black).


description:
Curved, tapering iron tool. Heavily oxidized, widest end appears to have an unevn surface, suggesting a break. Metal rectilinear at broken end.


description:
Rounded scabbard end. No apparent breaks. Largely oxidized iron, with some visible green patches from copper (?) - no metal visible. Flat back, rounded front.


description:
Piece of iron with an inlaid copper medallion. Copper is oxidized green, iron is crusted with oxidization. Copper crusted over with dirt - should clean up well. Design faintly visible. Iron broken - possibly 2 pieces of iron oxidized together.


description:
Stone block, worked into steps on one face (flat, ca. 5.5cm; recessed 3.8cm, flat 5.0cm, then broken); all faces weathered


description:
Oxidized iron axe head. Tapering, pointed end present. Widens to a cylinderas it recedes. Breaks are across the cylinder and into the body. Oxidized onto a large piece of ceramic. No opening for a handle visible.


description:
worked stone -- possibly the center of a quern. Both upper and lower surfaces are curved at the same angle


description:
Large metal object, possibly a large vessel handle. One end disintergrating, other end intact-large and knob-like (with a hole in the center possibly-not currently visible). Metal oxidized and flaking.


description:
Heavily oxidized object of iron.  Unidentified form and function.  Metal visible in break is pitted and breaking down.  May have once been square.


description:
Coin (obverse design, reverse blank) with e-w monogram. Oxidized green, mineral calcification heavy. Faint octaganal form.


description:
Wedge-shaped stone fragment with 2 bands incised across the front in low relief.  Stone is weathered and slightly pitted; base is semi-level.


description:
Architectural fragment.  Possibly small column base.  Round shape with bands around -- raised and depressed.  Highest band raised, then stone drops down and there is a small depression less finished than the rest.  Base smoothed but rough tool-marks visible.  No recent breaks


description:
Heavily oxidized iron object, round with a flat bottom and rounded top. Possibly a medallion or stud? No breaks evident, but heavily encrusted. Possible design on rounded surface.


description:
Broken spear head. Rounded tip, rectilinear shaft. Heavily encrusted with dirt and oxidization.


description:
Rough architectural fragment.  Toolmarks on one face, mortar or plaster adhering to reverse.  No smooth faces.  Face with toolmarks may once have had a raised band, but no longer


description:
Fragment of an iron spoon. 3.6cm of (round) handle, 2.1 cm of spoon (thin, curved). Oxidized. On the reverse at the handle join, there is a "P" visible, sideways. May be oxidation. Raised letter.


notes:
Width is span, diameter is base. Largest piece measured.


description:
yellow sandstone block, extremely pitted, with mortar on it; one face has a raised area 3.6cm higher than the surrounding stone, 6.9cm from one edge, flush with all other edges


description:
rectangular block of stone; four long faces show toolmarks, short face is completely rough, front face carved into a slope and sharp drop.  Slope does not cover front face, but stops 2.8cm from one edge and recedes up to 6.1cm to a flat face


description:
Two copper hooks -- closed loop at one end (from which width taken), open at the opposite.  No signs of breakage.  A curved cylinder of iron runs through each closed loop, both are broken off, but partially oxidized in place.  Possibly part of a copper (bronze) lamp holder with an iron top ring? Join between the two iron fragments in the loops


description:
Bronze object embedded in stone. 3 oxidized sections visible (possibly 4). One section was flaked off. Chip is present however. No visible design or other context indicators.


description:
Curved lead object. Very oxidized. Both tips broken.


description:
Fragmentary bronze polycandelon. Oxidized, but metal in good condition. Main piece, drawn, is a large hollowed-out triangle with an arm extending back below and possibly a circle above. Loop on lower arm.

notes:
1 portion of same/similar polycandelon found recently. Bronze object, bar on top, circle fragment below. cf SF 2327 and 2587.


description:
Iron chain link. Rounded loop on one end, single plate of metal between, broken at end. Metal visible in break. 0.8 cm diameter opening.


description:
Iron object, likely a key, shaft broken 3.5-4 cm down. Metal visible in break- appears to be a strip of metal with another wrapped around it. Flat back, large round protrusion form one end (on one side only).


description:
Small bronze coin, if any design completely obscured by oxidation and mineral deposit


description:
Octagonal bronze coin. Rim on obverse, blank reverse. No design visible- green oxidation and mineral deposits.


description:
Cruciform object, possibly a hook. Each arm of the cross is 0.8 cm wide, with the vertical arm tapering toward the bottom and turning sharply into an "L" shape (with no curvature). Metal heavily oxidized.


description:
marble (??) architectural fragment.  Once face has a square, 4.3x5.2cm, cut out of the corner.  One face stepped with toolmarks


description:
Iron object of unidentified form and function. Semi-triangular blob on the bottom with a squared shaft ramping upwards from it, Multiple breaks visible, oxidized.


description:
Arched iron object heavily oxidized shaped like a gothic arch, pointed top beveled inward. Round conical projection on backside of arch.


description:
Oxidized bronze coin. One edge slightly chipped. Reverse appears blank, obverse may have a design- oxidization is in clumps, may reflect a textureed surface. No rim is visible


description:
Square bone plaque, bone-white with four regular round holes in . Chip off one corner interior of hole near chips slightly beveled may indicate tool use. Was polished on at least one face.


description:
Large diamond-shaped head, broken off, and square shaft, broken.


description:
Round-head key. Round head on one side of square shaft. Shaft broken, no metal visible.


description:
Straight, flat iron shaft, ca. 5.3cm, leading to a flat round piece ca. 2.5cm dia, into another flat straight piece, 1.4cm long. Small hook attached to the round piece, ca. 1.5cm and broken after the curve.


description:
Flat, heavy iron plate with a narropwer strip of iron attached at a 90-degree angle.


description:
Extremely thin bronze onject with some mineral deposits. Curved to centre. No decorative element visible. Function unknown


description:
2 pcs of iron - cylindrical straight shafts with a rectangular bar at each end. Not attached to one another.


description:
3 bits of oxidized iron. One a small rectangular strip with a 90-degree bend at one end. Both ends are broken. One is a flat diamond-shape with a square hole in, one is a square shaft (broken) leading to an arrowhead-shaped flat iron patch with a hole near the base, broken at both ends.


description:
Iron object of unidentified form and fucntion. One piece is wide and flat (measured) with a projection of some sort on one ed. Another is narrower, but similar with a short (broken) shaft coming off one end. Other piece is just a broken bit of flat iron, but with a square hole cut through. First piece described is considerable heavier than the others.


description:
weathered stone, curved.  Toolmarks visible on interior curve.  Outside curve broken or very rough.  2 upper and lower faces broken.  Seastone? (?)


description:
Pyramidal loom weight, tip broken off leaving only the lower traces of a hole. Edge and corners rounded. Faces flat


description:
White stone - rounded and smooth.  Slightly flattened. No markings.


description:
Wide base slow taper needle. Iron No visible metal. Very oxidized.


description:
Flat round head leading into a square iron shaft. No hole in.


description:
long, narrow strip of metal, 1.2 cm leading to a rounded end with either a clasp or a nail through the centre. Over time, the rounded end has bent back and both sides are oxidized together.


description:
Diamond shaped piece of flat iron with a 0.3 cm hole through the centre. Round shaft, broken at end, leads off from one corner (metal visible in break), and a small cylindrical tip leads off the opposite.


description:
long, oxidized iron object. One break near the middle - metal visible in ca. 0.4cm/dia. Hollow or oxidized out.

notes:
In 2 pieces, both present. Measured intact.


description:
2 flat rounded pieces with holes in, broken across holes, to either side of a round shaft, ca. 3.6cm long. Round parts ca. 2.7cm/dia. Heavily oxidized, metal visible in. 1 recent break.


description:
Cylindrical iron object. Possibly a nail shaft. No metal visible. Oxidized and encrusted.


description:
2 pcs iron object. Flat straght, rounded centre, broken.


description:
Rectangular iron shaft leding to an arrow-shaped flat area. Near the bottom, there is a stud in. The mirroe may have been on the opposite side, hole visible, and just below it is a nail, oxidized in.


description:
Hollow iron object. Folded over strip of iron, broken at both ends, with a round projection coming from one side.


description:
Flat, slightly curved strip of iron and 2 broken diamond-shaoped (with holes) - one shaft rather broken and twisted. Holes in diamond square. Oxidized but not really encrusted.


description:
Iron key, similar to 2472, but diamond-shape is broken across bottom of hole. Metal cracking and flaking.


description:
Large diamond-shaoed head with a triangle hole at the top and a square shaft (broken, metal visible) at bottom. Heavy oxidization.


description:
Stone spindle whorl, broken in half. Chipped and scratched. Bottom .5 cm is cylindrical then tapers (cavetto style) to a flat top w/a hole through. Bottom also chipped at. Hole smoothed inside.


description:
Lead object unidentified form and function. Oxidized white. Rounded almost half cylindrical. Solid? Broken on 'flat' side - rough. Other sides are smooth.


description:
Flat rectangular iron object with 2 broken ends. One end broken into a narrow point- possibly not a break?


description:
Diamond-shaped flat piece of metal, square hole punched in with punched out metal remaining attached. At each corner of the diamond, a small ball of iron is attached,two attached at one corner, opposite corner broken off.


description:
Iron object - hasp? Slightly tapering shaft into a narrow diamond shape with a hole in the centre, pointed tip. Heavily oxidized, but crust has broken off in some areas and metal is visible.


description:
Large handle and other iron fragments. Handle is a long, tapering iron cylinder, curved up at both ends. (@11.2cm), then hooked under to form fitting.

notes:
Both parts of handle present and join up. Handle measured intact.


description:
Iron strap oxidized onto ceramic. Strap is long, rectangular and flat with 2 rounded ends. One end has a (possible) hole through, the other has a loop at one side. Perhaps part of a clasp?


description:
(0.25 hole) Small round bead. Top and bottom had hole through, slightly flattened. Sides bulbous. Encrusted w/ dirt.


description:
Small, round bronze coin. Any distinctive elements are obscured by oxidization and mineral deposits. Rim visible both sides.


description:
Oxidized and minieral encrusted bronze coin. Rim evident on one side only. Deposits too thick to make out any other elements.


description:
Long, flat rectangular object attached to 2-3 loops of metal, ending in a sharply tapered point possibly an object on a chain? Point possibly broken chain link.


description:
Red and black oxidized iron strap - ropund head narrowing into flat, straight strip, broken. Nail through center of round head.


description:
bent iron object; 3.7cm, metal is straight (end tapers); bends up and into a horseshoe loop, then down and straight form 3.1cm; very oxidized; possibly a hanger for an object


description:
Bronze oxidized coin. Break across one edge. Very oxidized - one face may have a cross on, but no other charateristics visible.


description:
10 pcs of an iron plate. Measured piece is slightly curved, all pcs are very oxidiized. Two pieces fit together and have a hooked end shaft, 7.5cm long and 1 cm wide, bent in an 'L' at the end a finished point. In the other direction the metal widens and flattens to a wide curved barrel with one blunt edge and one sharp (on the inside of the curve)


description:
Diamond-shaped flat head leading to a square shaft. Hole in center of diamond. Heavily oxidized. Other 2 pieces are more fragmentary versions of the same.


description:
round iron disk, oxidized and broken.  Oblong oval or rectangular hole through disk near center (break runs through); very regular and even hole


description:
Large flat iron object - form and function unidentified. One piece has a hole ca. 0.5cm in one corner - 2 corners (90 degrees) still evident. Possibly square? A ridge, flat, projects upward from the center at 2cm.


description:
Flat round diamond shaped disk with hooked point protruding on one side. A clasp perhaps? Oneside poss melted.


description:
Squre shaft of metal with "arrowhead" point tip. Very heavily oxidized. No metal visible.


description:
"S"-curve iron strap. Broken at both ends. Straight and flat. At one end, the iron begins to widen out and possibly has a hole bored in - on the break.


description:
Bent iron object. Acute angle bend. Poss. 2 separate shaft of iron oxidized together(?). Rectangular shaft.


description:
Heavilly oxidized peace of iron. Round flat head w/ squre shaft in one side.


description:
Squre shaft of metal with an amorphous bit oxidizwd on to one end.


description:
Iron key fragment. Heavelly oxidized. Round flat disk w/squreshaft on one side. Broken. Hole in ctr of disc.


description:
Two pieces of iron of unidintified form and function. One is a flat strap, 1.3 cm - widening, 2.7 cm at bottom. Bent nr top. Broken nail in broad end - through break. Other piece is a squre shaft with a flat round disc at the end (mostly broken off). Not both pieces of iron object


description:
Oxidized iron fragment, possibly of a key. Metal is roughly on Isoceles triangle with the most acute point twisted to the side. On another corner, a square (0.7 x 0.5) piece of iron is visible and relatively intact.


description:
2 round flat discs joined by four centimeter square shaft. One broken an poss. melted.


description:
Stone+Bronze(?). Conical weight (stone) w/8 faces. Rounded tip. Hole drilled through w/bronze loop (still) attached. Broken @ ball joint, but still intact. Black weight highly polished.


description:
Mineral encrusted clear glass. One end slightly pointed, bears traces of gold leaf?. No visible breaks. Melted into indistinct form.


description:
Flat diamond-shaped disc with square shaft leading off. Shaft starts to flatten out again @ break. Heavilly oxidized


description:
Iron key and 1 other fragment. Head of key is a rounded triangle, round shaft, then tail-fin shaped. Hole in head.


description:
Iron fragment, rounded, flat piece of iron ca. 1cm wide to 1.7cm wide. Short end broken, widest end rounded. 2-4cm nail through.


description:
Oxidized, flat, rectangular iron object. No discernible features or motifs.


description:
Iron object - key fragment? Oval to round cylinder shaft, flattening out at one end before it is broken off.


description:
Teardrop-shaped fragment of an iron object. Curved. Heavily oxidized.


description:
Round bronze coin. Heavily oxidized and encrusted - no distinguishing marks visible.


description:
Iron strap or hasp (though no clasp evident) with nails attached oxidized onto roof tile. Piece fused to tile has nail (round head, round shaft) though. Small loose piece has nothing. Lage loose piece has hole and possible nail head oxidized on nearby.


description:
Oxidized iron object. Iron cylinder connected to (broken?) blob


description:
Oxidized iron fragment. Short frag of square shaft haft flattens into wide diamond shape then into another (larger) square shaft.


description:
Fragmentary bronze coin. No distinguishing marks. Approx 1/4 of coin.


description:
"L"-shaped iron object. Possibly hook(?). 90angle. Wider at break than tip.End of tip bent up @ 3mm. Heavilly oxidized.


description:
Large round (?)-now-broken head with possible hole in the center (oxidized). Square shaft below, broken.


description:
Round flat head, broken through hole in center and then narrowing to a square shaft.


description:
Square shaft of iron, ca. 0.5x0.5cm, with a round, flattened disk beaten into the center, ca. 2.8cm/dia. Oxidized lump on one side where the flat disk joins the shaft, but cannot make out any features.


description:
Oxidized lump of iron. No distinguishing characteristics can be made out


description:
Flat rectangular strip of iron, broken at both ends and oxidized. One end has a high ridge coming out of the centre of the object.


description:
Small cylindrical object. Possibly square. Broken? No metal visible.


description:
Round shaft, heavily oxidized. No other distinguishing marks visible.


description:
Grey stone tessera. Square with slightly rounded edges. One surface v. smooth flat and 1 tone. Other 5 have white marks and striations and look less smooth. Porous grey stone.


description:
Heavily oidized iron object - roughly cylindrical. One end possibly finished, one visibly broken. Metal oxidizing over, but slightly visible.


description:
Oxidized bronze coin. Only one side struck? Edge has two nicksout of it. No motif discernable - perhaps dots in a "V" or low edge.


description:
Long, flat, narrow, oxidized iron fragment, tapering but no point present. 4 pieces. Cracking and flaking.


description:
Flat, round iron object with 7.1cm x 1.9cm raised ridge in centre. To one side of ridge, a rectangular hole ca. 2.0 x 0.75 cm has been cut. 4 round holes, 0.5 -2.0 cm are set around the circle evenly. A piece of approx 5cm has broken off.


description:
Iron object of inderterminate form and function. 2 pieces, both heavily oxidized. Small amount of metal ("L" shaped, thin) visible on oneside of largest lump.


description:
Small thick bronze coin. Completely encrusted in mineral deposits. Red and green oxidization.


description:
Broken fragment of worked bone. Outside smoothed, inside possibly cut in half. Edges blackened, upper face sepia.


description:
Rectilinear, flar iron object. 0.3cm hole in one end 0.65cm from tip. Small circle of iron attached to lip of hole - possibly material punched out to make hole.


description:
Blackened and oxidized strap of metal. A rounded strip is attached across the width on one side (0.4cm wide).


description:
round bronze vessel with a  2.6cm rim and .4cm lip; small round hole in one side of rim (outsdie) ca. 0.6cm diameter -- possibly a broken handle


description:
bronze object, broken and heavily oxidized. One edge, rounded, turns up .5cm from rest of fragment; may be part of design


description:
Fragmentary flat bronze object.  One fragment has a ridge, approximately .2 cm across.  One other piece has a small triangular projection.

notes:
six pieces present.  Ridged piece, the largest was measured.


description:
Curved fragments of handle(s). Slightly curved iron bars. Oxidized and cracking. One piece different - cylindrical, not flattened, and with one tapered end.


description:
Iron disk, round, with hole punched in the center and small dents(like those that would be made by the point of a nail) all around 2-3mm from edge. Oxidized.


description:
Flat iron plate/disk oxidized onto broken ceramic. Build up of iron in the centre, but no function or form visible.


description:
Oxidized lump of iron, No metal visible, no discrenible form or function.


description:
Blackened oxidized iron disk. 8 tiny dents in a circle around a central hole which has a nail protruding on the opther side.


description:
Burnt oxidized iron strap. Both ends broken. Opposite end has hole in and begins to taper inward.


description:
Blackened stone object possibly sling shot? Once round, broken across diameter and one other large chip on side. Possibly ceramic? Very regularly smooth and rounded.


description:
wide mouthed  globular pot, v thin orange fired ceramic. Flared rim. Had at least one handle (poss evidence for 2)

notes:
diamenter measured w base, height is full height 6 pieces


description:
Bronze ring, open on rim. Bronze flattens out at the opening on one side, other side still cylindrical. Oxidized and calcified.


description:
Cylinder of bone. 12 holes drilled in around, closer to one end. 2 holes vertically aligned, next to four holes in a diamond shape v close to base, then repeats. Band near holes has circles with dots in the centre punched around in a straight line. Opposite end has 2 rows of the same. Each end has a rim with 2 bands. Some minor external weathering but undamaged otherwise.


description:
Bronze strap, one end cut or broken to a point. Other end broken.


description:
Knife blade with 1 cutting edge (back edge wide). Front edge tapers to a point, back edge straight.


description:
3 cylindrical fragments of iron. One has a 4th fragment oxidized across it and has green oxidization stains near the base.


description:
Small flat iron object of unidentified form and function. Small rectilinear piece has a nail or bolt through one (slightly rounded) end. The other piece, more amorphous, has half of a small round (nail?) hole at the break. All oxidized.


description:
Squaer iron fragment, rounded corners with tiny dents (like those a nail would make) around the edge a hole in the center. Oxidized and one corner broken off.


description:
thickness 10.8. Bright green glazed jug. One handle open top and spout, both broken. White clay or slp inder green glaze stops 1.6cm from lower break (base broken off). Green glaze stops near there. Orange fired clay.


description:
Bone handled blade with some of blade attached. 3 bolts in to hold together 2 pieces of worked bone making up handle. Bone stamped with dot-in-circle motif in 3 rough rows on each side. @2.5cm of blade remains. Heavily corroded.


description:
0.95cm hole. Cylindrical clay loom weight with a large centre hole. Orange fired clay with alrge black inclusions. Some nicks and dents, but otherwise totally intact. Centre slightly wider than top and bottom. No tool marks.


description:
Worked cylinder of bone. Ends flat, outside of cylinder has a line incised down length, 0.5cm from each end a hole pierces the bone along the line. Visible tool marks.

notes:
Similair piece found described as horse equipment.


description:
(0.9 hole) Orage fired clay net weight, blackened on the outside. V broad tool marks all around. Cylindrical w/hole through.


description:
Iron strip which ends in a knot narrower than the strap oxidized to a fragment of worked bone. Bone is broken at 1 end. Carved into a flat strip with a loop rising from the ctr. Loop filled with metal - w/ knot at end of iron, is this a nail? On flat part of bone, cross hatching is evident.


description:
Heavily oxidized iron object. 2 flat pieces, 2 pieces ahowing a solid heavy corner. Metal in very bad shape.


description:
Broken bronze flat piece. Oxidized green, some black on.


description:
Folded fragment of bronze. Fold straight - intentional? Broken at opposite end.


description:
Iron sword shaft. Long and flat, one cutting edge, other edge wider. One side heavily oxidized. Tip not present. Base present - 2 holed boerd in and body widens to 4.8cm them.


description:
Heavily oxidized chunk of iron. Metal seems cracked and flaked inside oxidization. Metal visible on one side still indeterminate shape and function.


description:
square head, square shaft nail.  Visible in cracked oxidation case; 3 pieces


description:
Finished round edge, other edges are breaks. Oxidized and mineral encrusted. Flat round bronze disk fragment. No other marks visible.


description:
oxidized iron nail; possibly missing the head


description:
Small green-glazed jug.  Many mineral deposits and such (?). Base chipped to core.  Rim broken off -- one sherd present -- was broad and wide; orange fired clay

definition:
Green glaze almost complete pot (2 frags)


description:
Iron spear-head. Small isoceles triangle at tip, then a round shaft for 5.3cm. Arrowhead?


description:
Strip of iron, peaked in the center. If a knife, cutting edge not in evidence. Heavily oxidized and encrusted. Appears broken at one end and intact and rounded on the other.


description:
Flat, oblong bone tool of unidentified function. Sides are smooth and flat as are upper and lower surfaces. Ends are rounded, and a 0.45 cm diameter hole is drilled through the length, end to end. Tool marks evident. Several scratches and 1 small hole on the surface


description:
Oxidized iron key (?), shaft broken.  One side flat, other side has rectangular projection.  No metal apparent (?)


description:
Roundish stone -pock marked with black around the graffiti. Hole in narrrowest side. 1.7 diameter. Graffiti very crude-paler than surrounding stone and cut in shallowly.


description:
Byzantine enkolpion (reliquary cross) pendant -- hinged, so possibly personal reliquary or similar.  Cross features crucified Christ on at least one side.  Oxidized with some green patched; possibly some other motifs on cross, but not evident before conservation


description:
Dark Gloss ring. One edge is slightly uneven and jagged - possibly this is the roken rim of a vessel? Smooth and round, broken in half, tiny "seam" or inside curve.


description:
Flat, oxidized iron disk, broken all around. Another is a small, wishbone-shaped piece of oxidized metal, one leg melted up onto itself, the other one is curved., Very like the small metal stirrup found in the tomb.


description:
Tapering to a point. Iton knife blade, oxidized, no metal visible.


description:
Flat, roughly round iron disk. Somewhat oxodized but largely intact. Metal blackened on oneside.


description:
Cracking bronze coin (copper?). Round, rim present on at least one side. "V" shaped nick taken from side. Too encrusted to make out any distinctive markings


description:
Flat, rectangular strip of iron. One end broken, one end slightly wider and rounded. Heavily oxidized.


description:
Tapering pointed tip of a knife blade. Douoble edged? No metal visible, heavily oxidized.


description:
1.2-0.3 heavy bronze object. Encrusted in oxidization and minerla deposit. Metal visible in breaks one end hourglass shaped, other end smaller and flat. Object tapers from hourglass end to flat end.


description:
Oxidized iron strip, slight torsion. No metal visible


description:
(hole 0.7)  Round piece of worked bone. Inside natural. Round for 0.9cm, top 0.3cm are carved 1/2 thickness and square.Broken across one face of square. Possibly some sort of fitting.


description:
Iron object melted onto 2 fragments of roof tile. Heaviy oxidized

notes:
Measurement not really possible. Whole object L and W taken for reference


description:
Bronze coin - oxidized. Rim on only one side. A recent scratch reveals gleaming metal underneath. Centre too built up with minerals and oxidization to see.


description:
Round oxidized iron object. On one side, the metal has cracked split, may have connected to another piece here.


description:
'rho' type monogram coin. Very heavy, blank reverse. Oxidized with much minerla deposit.


description:
Bronze (copper?) coin fragile and cracking. Any  distinguishing characteristics weathered or hidden under mineral deposits and cracking


description:
Cluster of iron fittings. One piece has a broken shaft, flattening out to a diamond shape, then sylindrical again, and flat diamond with a break on the opposite side. Final diamond has a hook through. Oxidizing is different - like wrapping - on middle shaft. One piece is diamond-shaft-diamond with a possible nail hole. One piece is a wide iton ba with a loop at the bottom flattening out to a large diamond shape with a hole in.


description:
2 Flat rounded triangles connected by a 0.8cm diameter cylinder. One end has a curved prjection from one face ca. 1.8cm. Intentional curve. Corresponding lump on the other face. Possibly hook head.


description:
Blackened and oxidized iron object. Flat, round head narrowing to a (now hollow?) square shaft. Oxidized over a hole in the center of the disk.


description:
Rounded end of an iron strap with a round hole in. Very oxidized.


description:
Broken iron object. Flat round disk continuing to a square shaft. Round disk broken on one side, shaft broken as well. Oxidizing, metal visible.


description:
Roughly square stone, not smoothed or precisely finished -with 3 indentations of varying depths and diameters in a triangle arrangement on the smoothest surface (9x5,10x2,5x4.5 cms each) Soft stone. Related to blacksmithing.


description:
2 strips of oxidized bronze. One expands at one end, but is too encrusted to use. The other piece may have a joint visible at one end.


description:
Flat iron strip (@1cm wide) below a wide, flat iron shape (all sides now broken). Possibly a hole punched in the wide piece - oxidized over. Heavily corroded.


description:
Flat iron object, very brokem, melted or oxidized onto stone.


description:
oxidized iron fragment. No metal well-visible. Broken end flat, other end round with possible hole in.


description:
Oxidized bronze fragments. One round and slightly bent strip, one has part of a round strip, then opens and flattens into a circle.


description:
Broken flat round head narrowing to a (hollow) square shaft. 2nd piece is an "L" shaped hook whose measurements at the break match the other shaft. Tapers to apoint.


description:
Flat sstrap of iron with a rounded end. Near the end, a piece of iron rises 2.1cm from the strap. Flat and rounded, it has a hole punched in near the top. The other piece is a corroded bit of iron, cylindrical.


description:
Blackened coin. Thick rim visible, little else. Size and shape is analagous to the "rho" monogram - type of Romanus IV Diogenes (25-26mm size, deep ctr depression). Rim also visible on back, but nothing else.


description:
Rims on both sides. Obverse shows part of a design - possibly a letter - pi or gamma. No other characteristics visible.


description:
Oxidized (and burnt?) metal object. Possible hollowed out round shaft visible.


description:
Small bronze cube, one corner pulled out slightly more as if it attached to something.  Oxidized.


description:
Blackened (fire?) bronze coin. Half missing. Obverse encrusted, reverse possibly blank. Blackened into core.


description:
Green- or yellow-glazed ceramic bowl. Possibly burned? 14pcs present. Sone of glaze is iridescent. Outside is not glazed - slip painted with a sort of 2-petal tulip motif with glaze on upper outside rim and inside only. Incised or stamped decoration on inside on concave triangles, nested in one another, 2 visible on inside near base.

notes:
diameter is of base, which is also the sherd measured.

definition:
Articulated glazed vessel in situ in rm 33


description:
Solid bronze cylinder. One end finished, slightly bulbous and flat. Other end is possibly broken. Very yellow metal vivible in center of cylinder in break, though rest of break seems very aged.


description:
Flat, round iron disk. 1 small hole visible 0.5cm from edge. Iron loop attached 2.1cm from edge, near a tiny hole. Heavily oxidized and corroded.


description:
Rho-monogram coin, blank reverse (?). Obverse concave.


description:
Oxidized iron object in 2 lumps, one rounded, one more cylindrical. No visible metal.


description:
Round, heavy bronze coin. Rim on bothg sides. Obverse difficult to read. Reverse has a cross on top of 2 lines with a ball low down on either side near steps. Obverse cracked?


description:
Small bronze pellet. Unclear form and function. Round. Heavily oxodized. Break across one side.


description:
Oxidized iron lump. Flat on one side, rounded on the other. No metal visible.


description:
Broken chip of marble. One surface, not flat, is highly polished. One adjacent surface is smooth and not polished. All other surfaces are chipped and rough.


description:
Hwavily oxidized iron object - possibly a knife or other weapon - blade? One piece (measured) is wide and flat,, higher in the center than at the (pointed) edges. One other piece is round with a hole in the center and has a projecting piece of iron from 1 side.


description:
Corner cornice block, rough top and back sides (tool marks visible), smooth outer sides. 2 outer sides have circles carved out in relief (8.6 and 10.2 cm dia at 2cm high) side and front). Into each circle is engraved a rosette in a circle. Sides rise, base to top, in a shallow cavetto. No traces of pigment.

definition:
Architectural fragment -- cornice w/rosettes


description:
Heavily oxidized lump of iron. No metal or deistinguishing marks visible.


description:
3 oxidized lumps of bronze - broken. 2 have "L" bends, one seems to have been a flat strip. Encrusted in deposits.


description:
Oxidized lump of bronze. Vaguely round. Could be a coin.


description:
Thin shell, hollow bronze bead. Oxidized green. Loop broken off. No other characteristics currently visible.


description:
Unburnt non-carbonized wood. Found underneath burth timbers in room 29. Timber structure, not root. Possibly a poisonous wood - yew or juniper? N tool marks visible. No flat surfaces visible.


description:
Bronze cylinder, encrusted and oxidized green. One end rounded, other end broken.


description:
Heavily encrusted but intact bronze disk. One side flat, could be blank. Reverse is heavily built up and encrusted, possible molded design. Very heavy.


description:
Almond-shaped fragment of bronze. Oxidized black. 1.2cm of original edge on one side? All other edges broken.


description:
Rho monogram coin. Omega fully articulated, so later issue. Reverse completely built up and no part visible.


description:
Extremely heavy fragment of grindstone. Somewhat blackened. Hole in center, wider near hole than at rim but flat on 1 side (4.5cm - 9.5cm). Pock marked by weathering, possibly some tool marks visible on curving side.


description:
Rectangular column capital - 2 joined blocks, one small (lower) with organic design on visible faces (2, other 2 in dirt). Upper block is plain but slants outward as it rises - tool marks visible. Top is flat and extremely smooth and worn. In line with 2722 and 2723 as a "bench". Design on lower consists of 2 symmetrical curves (half "S") one either side of a wide vertical band.


description:
Flat rectangular marble architectural fragment - broken into 3 pcs, all present and in situ. Below is a smaller undercut block (not separate) 1.7 cm hight, 2.8 cm narrower than the rest of the block. Side faces of block expand slightly upward. Top's worn, smooth and flat. With 2721 and 2723 as a "bench".


description:
Reused column capital. Scroll design at lowest area  - wide bands around ends of scrolls and an abstract organic design - 2 almond shapes pointed ends joined by a wide band ? Repeated at least once. Cracked, weathered. Top expands outward and up to smooth, weathered flat top surface. 2 gameboards scratched in  - one large (13.8x 16.5) one smaller (16.5x 13.2) Also small box with triangle atop and t through (7.7 cm x 5.5 cm)

definition:
Large marble column capital with graffito gameboards


description:
Oxidzed lightly curved strip of iron. Some metal visible, across width only. One edge slightly wider than the other, but metal appears in good shape below the oxidization. One fragment more round - like part of a cirlce.


description:
Irregular stone ball, rounded, smoothed. Grey speckled pinkish /greyish stone


description:
Oxidized bronze coin - Romanus IV. Partially visible and monogram. Blank reverse


description:
Oxidized and possibly melted lump of bronze. Possibly half a coin - seems to be a rim and is a fairly flat half disk.


description:
Oxidized iron fragment. Possibly rectangular flat strip.


description:
(0.95 hole) Pinkish purple stone spindle whorl . In excellent condition. One small chip on one base surface. Rounded to ends which are smoothingly flat. Marks around body either tool marks or use marks.


description:
(moulded?) glass base. Hollow rolled rim, flat circular base w/ ctrl stem. In centre of breakage atop stem, glass is very rounded - possibly base and stem made independently of glass and pressed in. On underside, gloss is indented where stem rises. Iridiscent green glass fairly clear of inclusions.

notes:
Height includes stem. Rim height 0.4, base 0.3


description:
Centre fragment of a coin. Oxidized green w mineral deposits and a small blackened area. No distinguishing characteristics visible.


description:
Curved cylinder of lead. Oxidized white. Broken at both ends. Possilby was hook. Metal appears thinner at one spot on one end of the hook, but possibly just weathering pattern.


description:
Coin of the 'rho' monogram type (as called in Anokhin: coinage of Chersonesos (1980)). Blank reverse. Loop of rho is centred over stem.


description:
Very heavy oxidized bronze ? Coin. Edges visible (just) rim evident on one face. Minierals and oxidizing is too built up in centre to see any distinguishing features.


description:
Oxidized cylindrical iron object. Both ends pointed. Broken in 2 old breaks w/o oxidization. No metal visible.


description:
Oxidized bronze coin- faint design visible on one side - a sort of "B" shape? Rin evident. Rim on reverse as well, but nothing visible in centre (deposits). Possibly of the 9th C - Vassily I. Based on type. Reverse -cross with 2 balls either side, below arms


description:
Oxidized iron of unidentified format function. Possibly was straight and pointed like a nail shaft.


description:
7 pieces of heavily oxidized iron. Mostly rounded fragments, one more irregular. Metal visible on 1 small piece, in a break. Iron is round, hallowed hyoxidization.


description:
Top of a broken rho-monogram coin (loop of rho visible).  Reverse blank?  No depression in center.


description:
Carved bone object. Bone appears sepia through dirt. One hole drilled through straight top to bottom, another diagonally intersecting with the other. From top, object roughly "s" shaped.


description:
Heavily encrusted heavy bronze object. Roughly square but shows signs of breakage.


description:
Extremely heavy object. Square at the bottom with a loop on the top. Similar to a soda can tab. Eitehr hastily formed or metal has not stoof up well to erosion - oxidization makes it difficult to tell. Possibly lead?


description:
Heavily oxidized decaying iron strap wide head with two holes in. Extremely fragmentary.


description:
Flat rectangular shaft iron object. Broken at both ends. Metal visible in breaks in good condition. Bent into L shape.


description:
roughly oblong mass of indeterminate shape or function; may be more than one element fused together; appears to develop to a point at one end (see second fragment in bag); central element appears oblong in cross-section; heavy corrosion and disintegration; possibly a nail. (3 pieces in bag).


description:
fragment; architectural detail/ element; no finished edge; one face finished; no features; possible cornice piece

notes:
possibly part of re-used antique feature


description:
spherical solid, complete, iron ball/shot


description:
disc, probably coin, heavily encrusted both sides; one side shows possible evidence of rim; suggestion of milled edge; no discernible features either side


description:
roughly circular, shallow domed in cross-section, one face flat; presence of hammer scale suggests product of smithing; possibly simple corrosion product


description:
thin copper alloy (green corrosion product visible both faces); 6 straight edges, remainder roughly defined; significant encrustation and corrosion


description:
L-shaped object encrusted; green corrosion product suggests copper alloy constituent; 2 arms join at bulbous juncture; one face of joint and arms on one plane; part of hinge or buckle (?)


description:
fragment of simple limestone cornice, appears relatively roughly worked; only one face finished; base and upper face roughly finished (chisel marks visible on base ?); upper and base faces not parallel, converge away from front face; front face bears fillet/band at upper edge, 4cm wide; remainder concave, quarter round in cross-section, radius ca. 3,5 - 4,0 cm.


description:
Diam.: 2,2cm. Not readable at this moment


description:
n.2 frr. Length 5+3; thick. 2,8; circulr head (4,5cm)


description:
Diam.: 1,1cm: Not readable at this moment


description:
N.2 frr. The biggest one: square sect.; length 12,3cm, thick. 0,9cm, head 3cm. The small one:  square sect.; length 6cm, thick. 0,9, track of square head


description:
square section (joined with a pottery sherd)


description:
N.2 frr. square sect.; circular head (2,7cm ca.)


description:
circular section? Circular head (3cm ca.)


description:
n.2 frr. Length: 5,4+4,4cm; circular head (2cm ca.)


description:
N. 2 frr. Length: 5,5+1,2cm; square section? Circular head (2cm)


description:
Iron disk with three holes on. A square rectangle (contiguous) apear to have been cut out of the centre. Three holes visible.


description:
Oxidized, blackened, encrusted coin. Rim visible on 1 side only. No other distinctive characteristics visible.


description:
Purple-pink stone spindle whorl, Biconical with flat noses, all surfaces smooth and polished.


description:
Large oval-headed flat object with a round hole in the center. Square shaft flattening and widening at base, but broken there.


description:
2 ovoid hollow bronze objects - one has an irregular hole in the bottom. Also one lump of bronze, possibly a foot or portion of a base.


description:
Iron strap, both ends broken. Very oxidized. Other piece is a rectangular tube of iron with a T-bar at one end. Also very oxidized.


description:
Teardrop-shaped flat iron disk, hole in center and a square shaft, broken. Very oxidized.


description:
Flat broken square of bronze. One side has a small flange attached - it is definitely not part of the broken square but a separate attachment. Heavy. Very oxidized.


description:
Possibly rounded end of an iron hasp? Flat, slightly rounded very oxidized iron strip. Hole in - possibly nail hole? 0.2cm dia.


description:
Bronze object - pin? Tapering circular shaft spirals out on itself. Open at one end, a soft "V"-shape at the other. Oxidized.


description:
Iron Triangle. Use not clear, but edges appear finished and no breaks are visible. Very oxidized.


description:
Flat strip of iron, round at one end, broken at the other. Oxidizing.


description:
Pinkish-purple stone bead. Flat bottom, rounded top. One side chipped and base chipped, otherwise intact. All faces smoothed.


description:
Stone, organic shape (semi-), but all surfaces smoothed. Has one wide flat smooth surface, and an apparent corner.


description:
1/4 - 1/3 of a grinding stone. Blackened on one side, possibly by soil. Hole in centre. Stone weathered and pock marked. One surface flat, one slightly rounded.


description:
Fragment of a bronze objectl. Flat, all edges broken save one, straight but slightly rounded. Oxidized.


description:
Stone millstone. Fragmented. Curved underside, flat top with tool marks in. Hole in the center, smooth. One piece has a small niche dug in, approximately 3.3cm/dia.

notes:
3 pieces, measured together (not complete, however).


description:
Worked dark horn. Horn hassome white colouring on upper side. But is otherwise dark brown/black. Hollow, possibly trace burning on lower edge. Highly polished. One tool mark, al broad flat slice slightly oblique to the shape of the horn near the tip.


description:
Round bronze coin, "rho" monogram, blank reverse. Small nick out of one side of coin.


description:
Oxoidzed and cracked iron object. Ion cylinder, tapered end (?) attached to an iron bar at a 90-degree angle.


description:
Round convex iron disk. Oxidized and encrusted.


description:
Possibly lamp hanger (?). Three bronze cyllinders, broken at both ends. Oxidized.


description:
Massive solid iron shaft> little intact metal visible. Very bacly cracked and flaking. Rectangular.


description:
Possibly a blade? Flat and tapering. One side heavily oxidized and encrusted. Other side flaking and oxidized. Narrows along the length.


description:
Polycandelon fragments. Oxidized. Curved outer strips with a partial circle attached. Also, triangular piece broken at at least one edge.


description:
Iron Fragment - saw blade? 3 teeth, pointed, on one side of the largest piece. One piece possibly a handle - square shaft broadening into wide amorphous area. The other piece is flat and shapeless.


description:
Heavily weathered grind stone - smallish.  Burnt material clings to one surface. Seastone (small pebbles and seashell concreted together.  Pitted and pockmarked.


description:
Oxidized bronze coin. Crusted over entirely with plaster/mortar/mineral deposits.


description:
Oxidized, mineral encrusted coin. Rim visible, but nothing else.


description:
Flat iron fragment.  Many breaks.  Flat plates of metal visible in one break


description:
Curved, flat unidentified strip of iron.  Some metal visible along one break.  Cracking and flaking.


description:
Curved wall o fpithos (fragment).  Interior curve has impressed decoration, like thumb prints, in a line across one edge.  Blackened unevenly.  Fired orange.


description:
Flat, curved bronze strips - one heavily oxidized, possibly on another metal.  One wide, one thin.  Possibly part of a lamphorium or polycandela.


description:
10 pcs of poly candelon, and 1 piece of a bronze hanger, hook attached. 1 pc appears slightly melted. Similar to other 2 pcs of polycandelon already found. 1 piece with loop for hanger attached.

notes:
cf SF 2327 and 2374. 11 pcs present. Large flat piece (curved, straight) meas.


description:
Flat disk of ceramic.  Broken across one edge.  Smooth.  One surface flat, one surface higher at edges and depressed in the center.  Edges rounded.


description:
Broken oxidized iron object of unidentified form and function.  Flat, possibly with a short cylinder at the end with a knot to finish off?  Tool fragment?


description:
Diameter 2.2-2.8. Worked bone thimble. Open top and bottom. 2 incised lines in waves across top and bottom in each undulation. Centre has 2 lines running together to form cross shapes. Much damage to 2 flat-ish faces - weathering or use.


description:
Very red and black oxidization.  Flat strip of iron, possibly rounded at one end (or broken) with a pointed protrusion on one side - oxidized nail/bolt shaft?  Metal visible in one break - black in center.

definition:
Iron object (probably goes with SF 2565)


description:
Heavy black or dark green stone.  Smoothed and highly polished, but shape may be organic.  2 contiguous faces are smooth and flat, 3 others are rounded.  White material attached to one side - may be calcification or plaster/mortar.  Possible mortar stone?  Large whet stone?


description:
Squared strip of iron with a curve at one end.  Possibly a fragment of a chain link.


description:
Round bronze coin with the " rho" monogramj. Thick rim. Very heavy. Reverse blank?


description:
Round glass bead. Triangular strip of glass rolled in on itself-joint visible. Blueglass (cobalt blue?)


description:
Oxidized bronze hook. Broken shaft. Possibly was part of a long-shaft lampholder and has broken off? Hook blunt-tipped.


description:
Rectangular worked bone. Flat surface appear to have material overlaid/impressed - more bone, possibly in oval shape. Possibly repair - related? Sides are slightly indented with a hole at either end, 0.5 cm apart. Holes are through material. Button?


description:
Bright green glazed water jug.  One handle present and broken in two.  Pouring spout of rim present.  Some sherds blackened following destruction.  Glaze is over top, but stops 2/3 of the way down, and remaining surface is unglazed. 29 pieces present.


description:
Half of a coin, lacks green oxidization completely. Slight wear to body, break is not fresh. No stamp or texture visible on coin surfaces.


description:
Width measurement is for span. Shaft-tip is 0.3-0.1 cm. Broken end of iron hook, tapers to 0.3 cm shaft to pointed tip. Oxidization is broken off around tip.


description:
Oxidized iron object possibly square head of nail. Some metal visible in an old break. Square shaft, metal flaking plus cracking


description:
Width measurement is for shaft. 0.3 for tip. Iron hook very oxidize4d, shaft broken, no metal visible in break. J-shaped, but squared corners. Shaft to tip tapers1.2 cm-0.3 cm.


description:
Ceramic pot, nearly half in 3 pieces. Orange fired clay. No handle or joint visible. Near break on one side, clay is blackened (possibly through the fabric-difficult to see without cleaning)- fire damage? Found in pit in yard 2.


description:
small metal coin; oxidizing yellowish; mineral deposits; nothing visible on either face


description:
Thickness 0.2. Glass lamp, wick end, clear glass, blackened part of body attached. Wide glass ring at base of spout. Then narrows to rim. Slight irregularities to shape- spout "dented", rim uneven, wide ring not regular.


description:
Triangular piece of bronze, very thin, plus flat, heavily oxidized with soil deposits- seems to be some feature on the surfdace, but not discernable in current condition.


description:
Heavy bronze coin. Oxidized and encrusted with minerl deposits. Rims clear on both sides, design evident on both sides though not possible to see clearly in the current state. Lack of green oxidization plus heaviness prompts question of materials.


description:
Flat piece of iron heavily oxidized. Largest piece has a rounded edge and is broken on both sidesplus opposite in edge. 2 bolts in octagonal knots present. 1 curved piece, smaller, has a conical spike, slightly bent. 2 more pieces lifted by conservation on 15.07.04. One flat piece with bolt plus nut, one longer flange-like piece.


description:
half of a statue head; back sheared off.  Face broken to lips, still partly visible; some hair visible in thick strands, pulled back at the temples.  Very broad, nearly square jaw


description:
marble (?) architectural feature.  Bottom and carved face smoothed, rest rough.  4.5 cm from the bottom is an incised line, above which is a rounded band


description:
Flat bronze fragment. Hole bored in 0.4cm dia. Oxodizing - one side encrusted.


description:
Copper or bronze, oxidized green inside. Rounded half bottom( flat bottom seam?), hollow round top. No place to attach to clothing. Top encrusted with deposits.


description:
"J"-shaped hook; 3 pieces, one curved, two bent in L-shape.  Very corroded metal visible on all three, all three pieces broken


description:
N. 2 frr.: square sect.; circular head  (2cm ca.). Length: 7,5+ 2,6cm


description:
N. 2 frr.; square section. Length: 4+2,5+3,5


description:
square section; circular head (2cm ca.). Folded end


description:
ovoid section; blu glass . Painted decoration


notes:
sembra un attrezzo da lavoro, forse un'impugnatura


description:
n.3 different nails. 1) 6,1cm, square section 0,8cm, track of head. 2) 4,1cm, square section 0,4cm. 3)4,5cm, square section 0,5cm, circular head 2cm ca.


description:
square section; track of head; folded end


description:
squaresection; circular head (2cm ca.9); folded end


description:
n. 2 different frr. square section?one is completely folded


description:
N. 2  nails. 1) length 3cm, square section 0,4cm, circular head 1,5cvm ca. 2) 3,2cm, 0,7cm.


description:
Cylindrical iron object. Possibly square-head nail/bolt? Seems flat at the top, pointed at the bottom.


description:
Flat, curved iron strap. Curve may not be by design. Both ends broken.


description:
Iron strap, other end has a long, narrow strip of bronze wrapped around it and twisted. At the top, a bronze strap, now folded in half, is mounted on the bronze strip through a sqaure hole. At the top of the bronze strip is a widening oxidized circle. Bronze pieces are not oxidized together.


description:
Triangular bronze object with a chip out of the base. Unclear form and function.


description:
Oxidized bronze coin; brittle, cracked and broken. Heavy mineral deposits and oxidization. No distinctive characteristics visible.


description:
Oxidized bronze object - a hook? One end broken, apparently across a 3-4mm hole drilled in. Metal tapers from here (1.5) to tip (0.5). Some metal visible. Tip not pointed.


description:
Worked piece of bone. Roughly "S"-shaped, bottom narrower than the top. Shows tool marks, especially on the bottom. One side face, a deep niche is drilled in. All surfaces excapt rough base polished.


description:
Very encrusted, oxidized bronze coin. Coin barely visible in current condition.


description:
Heavily oxidized iron ring. No metal visible, center covered with dirt - probably hollow.


description:
Narrow bronze object. One end flattened into a fan shape, other end has a small knot of bronze. Ends joined by a small rectangular shaft. Possibly a large bead, broken along its seam?


description:
Hollow gold bead. Gold less than 0.1cm wide. Crushed and half-missing. Small hole visible in 1 end only.


description:
Oxidized lumps of iron. One flat, one "L"-shaped, one rounded.


description:
Flat strip of oxidized metal.  Broken at both ends.


description:
Round, oxidized bell with a small top loop Broken, but most parts are present. Seam is visible, 0.4cm wide band. Minor crushing damage.

notes:
Height is of loop on top. Object found on 2 consecutive days. Only 1 SF# assigned, but each has a Fondi #. Definitely 1 object (pieces fit together).


description:
Heavily oxidized "L"-shaped lump of iron. No visible metal.


description:
Melted glass cylinder, completely iridescent. Rim is fluted with a small spout in one side. Neck is round and melted at the bottom. A narrow strip of darker glass spirals around as decoration. Flass with traces of gold similarly melted.


description:
Glass spout, one end cut or very regularly broken. Rim puffs out a bit. Very iridescent. Spout not a regular cylinder. Other shard is of a small rounded peak (like an amphora bottom) - body shard?


description:
Bizarre lead object (melted glazing?). Two strips at a 90-degree angle, but rather irregular, with small 'antennae' running off in either direction. Some oxidization.


description:
Bone tool.  Rounded top, narrow neck then 1-2 cm wide body tapering to a point.  Stamped with one row of circle and dot designs (5 total?).  Backside poorly preserved and porous.  Front well preserved and polished (and sides).


description:
Oxidized and encrusted bronze coin. Rim visible on one side only. No defining characteristics visible.


description:
Small, thin-walled round bronze pot. Bottom heavily cracked and broken. Sides mostly intact.


description:
Flat (?) strip of iron, heavily oxidized. Some metal visible. Both ends rounded.


description:
Convex round bronze object, heavily encrusted. Hardly any visible metal.


description:
Oxidized iron object - bolt, nail or possibly cylinder. Wider at top than tip. Tip is pointed. No metal visible


description:
Oxidized iron object, possibly visible metal at "L" bend.


description:
Blackened bronze coin. One side is flat and shiny, reverse also appears blank and has some material encrusted on it. No rims visible.


description:
Heavily oxidized iron object. Metal visible, but is cracking and flaking - not recognizable, surfaces all irregular.


description:
Oxidized bronze coin. Obverse appears to be flaking off, Reverse possibly blank. No distinctive charcteristics visible.


description:
Encrusted, oxidized bronze objects. No metal visible, though there is a recent break - metal may be oxidized away or this may not be metal but dyed by metal.


description:
Thickness 0,2cm. Oxidized bronze or copper coin, not regularly round, one face had a raised bump in the center- maybe features a cross. Other face too encrusted to discern may have rested on oxidizing iron


description:
Rectangular ring of iron, corners rounded off, metal visiblein a few places.


description:
Flaking oxidized iron object may have once been round shaft but meatl has corroded into a sort of asterisk. Pointed tip, other end broken. Metal visible in.


description:
Clay pot, possibly a water jug.  Had one handle (broken, present) and at least one opening 8/7 cm from the base, upward-turned spout. White clay exterior (slip?) with brown-painted [upright semicircle] design around

notes:
6 pieces; 2 largest put together to measure


description:
fragment of copper alloy strip, slightly bent, slight encrustation both faces; edges clear/ distinct and parallel


description:
irregular shaped, heavily corroded iron object, probably a nail; item appears to taper to a point, much corroded material broken away


description:
2 parts of heavy iron hollow sphere; cannon ball/ bomb


description:
half fragment copper alloy disc; encrusted and corroded (green corrosion product both sides); radial cracking from edge and on faces; evidence of raised rim on one face; no discernible features


description:
forged iron tool head (possibly axe); oval socket 4.5 cm long dia. parallel to blade faces; side cheeks begin to diverge just beyond socket; corrosion and encrustation but iron below surface.


description:
Irregular shaped copper alloy plate; encrusted; green corrosion product; no discernible features; one possible straight (ie original) edge.


description:
heavily corroded irregular mass; no discernible features; possibly slag


description:
heavily corroded lump of iron with deep fissures/ cracks


description:
copper alloy item- some encrustation with corrosion product; comprising spherical element 0,76 cm dia., and circular element 0,6 cm long, 0,45 cm wide with central hole ca. 0,10 cm dia.; probable button/ pendant; dateable range 9th-13th cents.

notes:
examples in Preserve museum, in silver, bone, copper


description:
segment of iron ring of oval cross- section, deduced radius 5,9 cm.


description:
flattish mass of iron of irregular shape; probably slag.

notes:
pass to Chris Salter for metallurgical exam


description:
roughly oblong shape; 0,6cm wide lug projecting 0,4 cm from one edge 2,3 cm from wider end; cross-section appears roughly ovoid/oval; corrosion and encrustation; no discernible features; long sides appear to converge; appears to be evidence of fracture at wider end ( Item originally part of longer element); one face flatter than other.


description:
Item circular or suffered bend damage; iron oxides and green corrosion product; concreted with corroded glass element


description:
circular domic terracota article with 0,4 cm dia. Hole off-centre; slight damage to 1,5 cm of circumference; upper domed part smooth finish; base section rough.


description:
"J"-shaped item of circular cross-section; pitted, corroded and encrusted.


description:
natural vertebra; no evidence of working or added colour/ markings; possibly used as counter/ game piece


description:
almost complete coin, small section at upper left missing, small nick, 0,1 cm, at base. Omega- rho monogram; rim visible half circumference both faces; on reverse suggestion of feature. Dateable range 11th - 14th cents.


description:
large section spherical hollow iron object; cannon ball/ shot/ bomb.


description:
heavily encrusted, corroded, roughly oblong; generally oval in cross-section; possibly part of nail


description:
"J"- shaped, heavily encrusted, corroded


description:
piece of lead, single folded longitudinally, width of original unfolded piece 2.4 cm.


description:
Irregular fragment, one face finished and displaying 3-step profile, one of which "S"-shape; pattern apparently replicated on opposite face; part of door jamb?


description:
Roughly oval piece of pumice with some pitting damage; on face bears lateral striations- result of sharpening action; flattening and striations also to two edges from same process. Whetstone


description:
Heavily encrusted disc; green corrosion product; heavy in weight; no discernible features/ detail.


description:
heavily encrusted; green corrosion product; no discernible features either face; quarter segment


description:
longitudinal iron object seemingly tapering to a point; heavily corroded; probable nail


description:
almost semi-circular part of annular object with circular cross-section; one end pinched/ reduced in thickness ca 1 cm before end; some encrustation; dia of piece ca. 3,5 cm.


description:
2 Kg iron weight waisted at 7cm from base; circular cross- section; embossed "2 KG (in Cyrillic)" on one side, " K(?)" on other


description:
Roughly rectangular fragment, "L"- shaped in profile, short leg ca. 20 cm by 14 cm; heavily weathered, pitted. Possible door jamb.


description:
Almost complete coin, heavy encrustation both sides; damage to ca. quarter of circumference; raised rim visible both faces; "M"(?) feature on one face; no feature discernible on other face but raised plane suggests feature will be revealed on restoration.


description:
2 pieces seemingly forming "J"-shaped item, corroded and encrusted; possible hook


description:
longitudinal irregular shaped fragment, heavily corroded; heavily encrusted one side; fragment of nail (?)


description:
relatively thin (ca. 1,3 - 2,3 cm) fragment of marble; one face finished; opposite face rough and uneven; 5 edges, one apparently worked to a straight edge 4,9 cm long; other faces fractured; fragment of revetment(?)


description:
roughly oblong with rounded edges, flat oval in cross-section; 0,5cm hole drilled through ca. 0,5 cm from one end; slight pitting on surface


description:
roughly rectangular limestone fragment; one face has rectangular indentation 10 cm by 7 cm by ca. 5 cm deep, ca. 7,5 cm from one edge (for door post?)


description:
roughly square limestone architectural element; one face divided into 2 equal areas by shallow concave faces (resembling fluting) meeting centrally at an arris and towards each end widening into triangular fillets. Opposing face has shallow concave profile across whole face.


description:
Very irregular shaped; 3 possible lateral moldings but exact shape difficult to discern either in aspect or profile. )n second half round molding possible remnant of carved relief.


description:
Heavily corroded/ scarred flattish piece of copper/ copper alloy; green corrosion product; encrustation.


description:
Irregular shaped flattish piece of copper/ copper alloy; green corrosion product; Item thicker at one end (0,5 cm), reducing to 0,25 cm at other; item appears to have one flat surface; possibly a single folded piece of plate; some evidence at both ends of plate edge of 0,15 cm thickness.


description:
fragment of limestone, apparently corner section of basin ca 11 cm deep with sides ca 7 cm wide; all surfaces heavily pitted.


description:
Heavily corroded and encrusted circular/ possibly annular object; much iron oxide obscures features; central crossing element discernible (pin?); mineralized organic/ textile fragment within circumference; possibly buckle.


description:
Corroded and encrusted strip of iron, "S"-shaped in profile.


description:
Longitudinal mass of iron with circular cross-section developing to an apparent point at one end; severe corrosion and encrustation; long and deep (0,3 cm - 0,4 cm) split down one side.


description:
Roughly "L"- shaped limestone item; all surfaces heavily pitted; inner aspect of "L" has almost circular profile.


description:
Roughly circular copper/copper alloy disc, heavily encrusted; no discernible features or element.


description:
half fragment game piece; central convex mound 0,8cm with narrow 0,05 cm outer ring, small depression at center, wide convex band 0,75, slightly raised outer band 0,3 cm incised with single line making double ring around circumference; outer band smaller in profile/ thickness 0,4 cm. Smoothly finished both faces; reverse face has small 0,2 cm depression at center (from turning process?); appear to be 2 incised marks on central mound. Age range 10th- 14th cents

notes:
c.f. Sarachane (Istanbul) type B; comparable e.g. in Preserve museum


description:
Heavy encrusted oblong object, probably iron bar ca. 0,7 cm square cross- section. Small 0,35 cm piece of iron projects 0,35 cm from encrusted surface ca. 0,5 cm from one end.


description:
Roughly circular flat oval in profile, heavily corroded; some encrustation one face.


description:
Heavily corroded and encrusted longitudinal item which appears to develop from a stem ca 0,3 cm wide to bulbous terminus ca 0,9 cm wide.


description:
Roughly polygonal piece of iron "plate" of varying thickness (0,2 cm - 0,5 cm), no identifiable features, heavily corroded; probable hammer scale.


description:
Longitudinal object heavily encrusted and corroded; cross- section and profile entirely uncertain; two 0,5 cm lug-like elements, 0,8 cm apart, project ca. 0,5 cm from surface, 1 cm from one end; other end appears to develop to a point.


description:
fragment of hollow iron sphere; possibly a bomb


description:
bronze coin; obverse partially obscured by encrustation. Omega/ rho monogram; suggestion of rim upper and lower circumference; no identifiable features on reverse which partly encrusted, no apparent rim. Right-angled nick 0,2 cm deep (deliberate) at base of circumference. Sketch on manual form. Possible range 10th - 14th century.


description:
irregular oblong disc pierced with single circular hole; central material from the punching of the hole appears to have been folded back onto reverse side surface- possible strike marks visible. No discernable features either side; complete encrustation both sides; central hole dia. 0,7 cm. Material lead or lead alloy. Half of circumference formed by 3 straight edges (?). Sketch on manual form


description:
roughly circular (naturally formed ?), pierced by 0,10 cm hole off-center; one side indented roughly circular depression 0,8 cm- 0,9 cm dia. Other side ridged on one side only of hole across entire face; 3 ridges. Probably naturally formed (fish?) bone


description:
Triangular spatula shaped instrument (for cutting or scraping?); blade end 3,0 cm long, 1.4 cm wide; almost complete encrustation; green oxidant at blade end; blade of spatula narrows/ tapers in edge-section (0,15 cm to 0,1 cm) to form apparent blade. Shaft end appears to be circular in cross-section; irregularities at end suggest fracture. Slight bend damage in shaft 0,80 cm from end. Sketch on manual form


description:
Roughly circular architectural element- probably base of column; one face wider (41cm) than other (39 cm); a 3 cm wide moulding extends around half circumference; no other architectural detail discernible; generally ptted and weathered; wider face relatively flat, no evidence of fracture damage; other face has evidence of fracture damage and deep weather/ water penetration


description:
Nail, roughly circular (broadly oval) head 1,7 cm by 1,4 cm, ca. 0,2 cm thick. Nail attached, roughly centrally 1,2 cm long, 0,5 cm wide at base, 0,15 cm at point; has been bent through 90 degrees; part (0,5 cm) of head has been bent up from plane of head by ca. 45 degrees; corrosion and encrustation generally about all parts.


description:
Longitudinal fragment, "L"- shaped in end section profile; all surfaces heavily weathered and pitted.


description:
Roughly circular; rim visible both faces; encrustation veils features but raised elements in profile suggest detail will be revealed on cleaning


description:
N. 4 frr. Square section; circular head (2,5 cm ca.)


description:
Thick.: 0,1cm. Decorated with a cross and 4 points


description:
N.2 frr. Square section; circular head (2,4cm ca.)


description:
square section; circular head (2 cm ca.)


description:
square sect.; missimg head. Length: 4,5+1,5cm


description:
long animal bone with an hole on one side


description:
square section. Circular head (2cm); length: 4,3+3,2cm


description:
Almost  circular , with central hole; diam.: 3cm;2,5cm. Yellow glass with white and black decorations ("pasta vitrea")


description:
fragment with flat end and ovoid section


description:
square section; circular head (2,4 cm ca.)


description:
with a square groove on one of short side


description:
cylindrical. Decorated with incised dots. Tracks of iron inside. It coul be  a grasp (impugnatura) for a knife


description:
more or less circular (2x2,5cm ca.); sgraffito with a cross and dots


description:
it could be a sort of nail: flat section; folded end


description:
Almost complete lamp, grey ware in black slip. Thumb rest projects to one side. Upper surface decorated with single 0.3 cm wide concentric ring at edge. Base rests upon ring base 3.8 cm dia, 0.45 wide


description:
4 fragments which fit together (dimensions above are of reconstructed article). Fragment of wire/rod of constant 0.15 dia. Encrusted and corroded


description:
Circular in plan 2.2 cm dia, pierced centraly by a 0.5 cm dia hole. In edge profile ovaloid (1.5 cm dia) Blue glass. Object fractured cleanly along line of central hole


description:
Flattish irregular roughly "L" shape. V. heavily encrusted and corroded. No regular features visible. Possibly part plate or bar


description:
Seemingly semi-circular in plan fragments. V. heavily corroded and encrusted. No visible feature


description:
Heavily corroded and encrusted. Roughly oval in plan. In side profile appears to be a plate-like element ca 0.1 -0.2 cm wide. At center a mound of material chiefly encrustation but some evidence of stud-like iron protrusion which may be related to a 0.5 cm lone, 0.4 cm wide protrusion on reverse side of the plate - rivet?


description:
Heavily encrusted both faces. Some material loss to one face through corrosion. No features visible


description:
V. nearly circular in plan, plat domical in end profile; plain glass, corroded. Rounded edges


description:
Fragment of copper/copper alloy plate or strip ca 0.1 cm thick roughly oblong. One face heavily encrusted with copper corrosion product forming mound on the face. All heavily corroded


description:
Roughly circular, heavily corroded and encrusted. No features visible


description:
Length of copper/copper alloy bar ca 18.2 cm long. Bent at centre and again ca 6 cm from each end to form roughly circular object with over lapping ends. (Dimensions above are of object so formed) At centre, rectangular cross section 0.3 cm x 0.1 cm from the center sides divergent to each terminus. Ca. 3 cm from each terminus arms widen from 0.3 cm width to 0.5 cm dia circular cross section. Object heavily corroded and encrusted


description:
Longitudinal fragment, roughly rectangular but irregular shaped. Flattish in edge profile. No regular features. All heavily corroded (some response to magnet) and encrusted.


description:
Heavily corroded and encrusted fragment of plate. Roughly rectangular in plan. One seemingly regular rectilinear side but masked by encrustations. Thickness of original plate ca. 0,1 cm.


description:
Sheep/goat knuckle bone exhibiting wear to faces commensurate with use as a gaming ect use


description:
Fragment white (procennesain?) marble with one regular rectilinear edge. One face moulded, 1.4 cm wide flat band separated by 0.7 cm wide, 0.2 cm deep groove from Ogee style convex and concave moulding. Constant thickness 1.7 cm. Reverse face plain and unadorned


description:
Almost complete coin, ca 2 cm loss of material around cercumference. Heavily corroded. No features discernible


description:
Fragment revetment. No regular edges. One face finished to flat unadorned surface. Reverse face rough with evidence of chisel marks


description:
V. heavily corroded and encrusted. Fragmentary state. Ca one third lost. No discernible features


comments:
Point offset 30 cm into wall; from 19JUL06B pt1032

description:
Fragment handle of amphora. Stamped monogram impressed on upper part of handle "sigma epsilon" (stamp dimensions: 2 x 1.5 cm) Dimensions above are of fragment. Width of handle 5.5 cm. Thickness of material 0.8 cm


comments:
pt offset 7 cm into wall, from 19JUL06B pt 1105

description:
Tip of antler with preliminary 0.2 cm wide transverse saw cut. Production refuse


description:
part of decoration with globets; dark blue glass


description:
square section; missing head. Length: 4,3+1,8cm


description:
Ovoid section; decirated with fingerprint. Dark blue glass


description:
rim of a jug = polichrome glazed white ware


description:
N. 2 frr. square section; circular head (1,5cm)


description:
square section; tracks of head (1,8cm ca.)


description:
square section; tracks of head (1cm ca.)


description:
Length: 4+4,5cm; missing head; circular ? Section


description:
It coul be silver or bronze ? Thick. 0,1cm


description:
Folded end; square section; square head ? 2cm


description:
circular base i light geen glass; diam. Not measurable


description:
N.2 frr: length 3,5+4,5cm. Square section. Circular head (2,5cm ca)


description:
N.2 frr.; one is pointed,  with circular section.


description:
square section; circular head (1,8 cm ca.)


description:
Length: 5+1,3cm; square section; circular head 2cm ca.)


description:
n.2 frr.square section; circular head (2,5cm ca.)


description:
Square section; tracks of circular head (2cm ca.)


description:
square section ?; circular head (2cm ca.); folded end


description:
N. 2 frr: length: 3; 2,5cm ca. quare section


description:
N. 2 frr. in different size. Square shape


description:
square section; circular head (2,5cm ca.)


description:
circular: diam. 1,8 cm ca. decorated with small dotts


description:
n. 3 frr; square section. Very bad condition


description:
diam. Not measurable. Ligth yellow glass


description:
N.2 frr.: length 3+3cm ca.; circular head  (2cm ca.)


description:
N.2 frr.: square section. Length: 7,4cm; 7,5cm (pointed end)


description:
Diam.2,5. Not readable at this moment (only half was found)


description:
n.4 frr. One with circular head (2,3cm ca.)


description:
circular section? Missing head. Length: 4,5+4cm


description:
squared; probable incription on one side


description:
square section; length: 3,5+1,6cm ca. Circular head (2cm)


description:
N. 3 frr. circular sect.? Circular head (2cm ca.)


description:
Macina/pestello in pietra con concavit? centrale


description:
Sez. quadrata, testa circolare del diam. Di 2,5cm


description:
Diametro non rilevabile.Piccola presa ad orecchio


description:
dimensioni non rilevabili: troppo frammentario.


description:
testa circolare, diam 3cm; sez. quadrata


description:
Ansa di bicchier in vetro verde; sezione ovoidale


description:
sezione quadrata; diametro della testa 3cm.


description:
N. 2 nailsi : the little one is  intact (lenght  1,5cm; thick. 0,3; head 0,5cm). The big one  haven't his head (lenght 4cm; thick. 0,8 ca.)


description:
circular worked (animal) bone with central hole.


description:
Square section; circular head (diam. 2cm)


description:
square section; circular head (1,5cm ca.)


description:
wallplaster fr. Painted in red and white


notes:
Not possible to describe while in restauration


notes:
no possible to describe while in restauration


description:
square section; circular head (2cm ca.): N.2 frr.


description:
Squared, with a central square hole (10x15cm)


description:
N. 2 frr. Square section; circular head (3cm)


description:
Small fragment probably from a goblet; ligth geen


description:
Frr. local transport amphora  with flat circular base (8cm)


description:
Frr. Of plaque in very bad condition; decorated with little circles


description:
No measurable: many small frr.; cfr. SF 945


description:
circular with central hole. Diam. Not measurable


description:
n.2 different frr. (2,5, 2,7 cm); square section


description:
square section; track of circular head (1cm ca.)


description:
square secyion; circular head (2,2cm ca.)


description:
Diam.: 1,6cm. Not readable at this moment


description:
square section; circular head (2cm ca.)
N. 2 frr.


description:
n. 2 different frr.: 1) length 3cm; thick. 0,5; square section; circular head (2cm ca.). 2) length: 1,9cm; tick. 0,4; square section.


description:
square section; circular head (ca. 1,5cm)


description:
Length: 4+4cm ca. Square section; circular head (2cm)


description:
square section; folded: length, 3+10,5cm.


description:
length: 5+2,2cm. Square section; track of circular head


description:
incised decoration on the surface (animalistic)


description:
Not readable: very bad condition; DIAM.:1,6cm ca.


description:
square section; circular head (2cm). Attached to a pottery sherd


description:
square section;missing head. Lenght 4+4cm.


description:
Circular section; it could be a key or a pin


description:
square sec.; missing head. attached to a tile


description:
N. 2 frr.Suare sect.; circular head (2cm ca.). Length: 7+3,7cm ca.


description:
N. 3 frr.: 2,2+3,4+6,4. square section; square head (1,2cm)


description:
square section; circular head (1cm ca.); beetween two fr of  mortar


description:
square sect.?; circular head (2cm). Length: 5+4cm


description:
folded in shape of  "U"; circular ? Section.


description:
tracks of decoration on both faces. It coul be a fr. of barrier


description:
square section; circular  head (2cm ca.)


description:
square section. N. 2 frr. Length: 4+4+2cm


description:
square sect.? Circular head (2cm). Length: 4+4cm ca.


description:
ovoid section. Moulded on one side. Blue glass


description:
ovoid section; ligth yellow decoration. Dark blue glass


description:
length 3,4+3cm; square sect.; missing head


description:
Cast iron image of booted left foot, top of boot decorated with milled or ridged lip( only fragment preserved); top of boot traversed by 0,1 cm wide ridge ( from casting process?).


description:
Irregular shaped limestone fragment; one edge carries series of parallel transverse striations.


description:
2 pieces, shapeless, formless, total encrustation (slag?).


description:
irregular shaped, roughly conical (though lop-sided) rising ca. 4cm from a roughly circular flattish base pirced asymetrically with a 1,1 cm dia hole. Appears non-ferrous. Non-responsive to magnet and relatively light in weight for its bulk). Slight encrustations. Surface generally distorted.


description:
copper/copper alloy disc; green corrosion product covering all surfaces. No discernible features either face; no evidence of milling on edge. Some encrustation one face.


description:
Curvilinear fragment (height of arc above chord 1,2 cm). Cross- section varies. At one end roughly ovoid (0,8 cm long dia, 0,7cm short dia), other end almost rectangular with rounded corners 0,7 cm by 0,6 cm. Each face caries some evidence of design detail. Inner aspect bears series of transverse lines ca 0,4 cm apart. Colour dark in cross- section. Surface colour silvery.


description:
2 pieces heavily corroded/ encrusted copper/copper alloy; both irregular shaped. Uncertain inter-relationship. Piece a, length 1,1cm, width 0,8cm, height 0,7cm, appears to be a folded fragment. Piece b, length 1,3cm, width 1,0cm, height 0,4cm, has flattish aspect.


description:
irregular shaped heavily encusted/corroded. One side has generally flat aspect. Remainder domical in profile. In plan narrow one end thickening in bulbous fashion (slag ?).


description:
longitudinal object, parallel sided; circular cross-section 0,5 cm dia. Solid. Copper/copper alloy. Generally corroded/encrusted throughout. One end appears to taper to a beak shaped point.


description:
fragment of copper/copper alloy plate. Heavily encrusted/corroded. Generally consistent thickness. Plate distorted to the face. 2 opposite sides appear straight/regular suggesting is fragment of a strip.


description:
longitudinal heavily encrusted/ corroded object. Indeterminate cross-section (possibly originally square). Suggestion of slight bend along length but masked by encrustation (nail ?).


description:
Irregular shaped fragment. Heavily corroded/ encrusted. Uncertain of material; possible iron corrosion product.


description:
Fragment of marble, one face polished. Consistent thickness 1,3 cm. some pitting to polished surface. No other features. White colouration with grey veins ( Proconnesian?).


description:
Tear-drop shaped, circular cross-section. White colour; plain undecorated. Pierced centrally whole length.


description:
square section; length: 6+4cm.Circular head (2cm)


description:
N. 2 frr.: 6,5+2,5cm ca., square section; circular head (2cm)


description:
tectangular shape. Squared hole on the biggest surface: length 10cm; height 9cm. One hole on a short side: length 6, height 16.
Reused


description:
rectangular shape; squared furrow on one side (width 5cm)


description:
N. 2 frr.: 6+3. Square section; circular head (3cm)


description:
N.3 small frr.; flat section; blue glass


description:
square shape (it could be a fr. of buckle ?)


description:
Circular (diam.2cm ca.). Cross incised on the surface


description:
Diam.: 1,9cm. Not readable at this moment


description:
Diam.: 1,7cm. Not readable at this moment


description:
tracks inside mortar colse to a fr. of tile. Square section


description:
square section; circular ehad (1,8cm ca)


description:
Many small frr.; circular head (2,5 cm ca.)


description:
Diam: 1,5cm. Not readable at this moment


description:
n.2 frr. attacked to tiles. Square section. Length: 3,5; 4,2cm


description:
square section; circular head (1,9cm ca.)


description:
square section; circular head (3cm). N. 2 frr.


description:
N. 3 different frr.: squiare section; circular head (3cm ca.)


description:
N.3 different frr. Square section; circular head (2cm)


description:
incised cross on the short side (8cmx6cm)


description:
Heavily corroded (green product)/ encrusted; obv, faint outline omega/ rho monogram(?) and rim; rev, suggestion of rim and profile suggesting a cross with globular extensions.


description:
Signet type ring, rectangular face 0,65 cm by 0,75 cm; flat triangular (slightly curved) haunches 0,5 cm long reducing to a 0,2 cm dia ring, hemispherical in cross- section; inner ring dia 1,25 cm.


description:
Fragment of limestone, carved relief covering 2 faces


description:
Roughly rectangular strip, heavily corroded/ encrusted; encrusted one side with copper/ copper alloy element- green product; circular profile 0,8 cm dia.

definition:
Iron object (bronze object was attached)


description:
Longitudinal, roughly circular in cross- section; substantially corroded/ encrusted, fissured.


description:
2 pieces; longitudinal; 6 cm total length; flattish cross- section profile; heavily corroded/ encrusted; at one end sides appear convergent for ca. 2 cm to form rounded point; other end terminates with stepped in lug like element 0,5 cm wide.


description:
Longitudinal; very heavily corroded/ encrusted; fissured; fragile state. Comprises 2 main elements; 1; spike like section 29,5 cm long ca. 2 cm wide (roughly square cross- section); all sides appear to converge to a rounded point; 2; attached to element 1, contiguous with it, commencing 1,5 cm from the wider end of element 1; rectangular element (2,5 cm by 3,5 cm) 11 cm long, apparantly parallel rectilinear sides; sides then step down to form waisted section ca 2,5 cm by 2,5 cm which itself is connected to a roughly square 5 cm by 5cm, ca 3 cm deep section; projecting perpendicularly from this at its further edge is a 2,5 cm by 3 cm wide part which straddles element 1. manner of attachment between elements 1  and 2 unclear; object of this configuration not before seen at the preserve.


description:
Fragment of rock with one flat polished surface (dimensions are of this surface).


description:
Heavily corroded/ encrusted; long arrow head shape, terminating in a point, flattish end profile.


description:
Roughly "L" shaped, rounded cross- section; curved on inner and outer aspect of the corner; heavily corroded/ encrusted, fissured


description:
2 pieces (dimensions of larger piece); longitudinal elements; flat domical end cross- section; pierced regularly along its length with 0,5 cm dia holes; holes are not equidistant from each other.


description:
heavily corroded/encrusted; rectangular in plan; ellipsoidal end profiles; (one flatter than other); object would appear to be originally tubular; iron plate (thickness ca. 0.2cm), since suffering crush damage.


description:
very heavily corroded and fragile; 4 pieces, 2 largest appear to fit to create a partial circle; a coin? No identifiable features at all.


description:
obv: omega/rho monogram, rim; heavily corroded and some encrustation; rev: substantial encrustation; no features visible.


description:
semi-circular segment; heavily corroded/encrusted; no discernable features.


description:
heavily corroded/encrusted both faces; rim visible one face and some elements of a feature; no details visible on other face.


description:
roughly spheroid; lightly encrusted; 1.1cm x 1cm segment lost at surface.


description:
Fragment; 2 faces and 1 edge finished; edge appears to have concave molding along whole length but not finely finished; top and bottom face reasonably finely finished; all other edges fractured; constant thickness 6 cm.


description:
heavily corroded/encrusted (particularly one face); irregularly shaped in plan; consistent thickness; edges torn; bend damage.


description:
heavily corroded, fragile state, potentially fragmentary, fissures 2 cracks at circumference; one face encrusted; rim visible; no other features visible.


description:
molded face, 3 rounded step moldings, recessive; rounded narrow edge 1.9cm wide; opposite edge 9 rear faces roughly finished; 2 side edges fractured.


description:
2 parts which combine to form complete object; stem, circular cross-section; both ends develop to a point; at one end, 1cm from point, maximum diameter of stem 0.45cm; sides from there convergent to other end, over 9.4cm, to point.

notes:
stylus - comparator in Museum (5-12th Centuries)


description:
Heavily corroded and encrusted fragment of copper/copper alloy wire. Slightly curvilinear with sides which converge to a point. Seemingly circular in end section.


description:
Rectangular, wedge-shaped in edge profile. Copper/copper alloy, heavily corroded. Partial encrustation. Evidence of folding at edges.


description:
Length of copper/copper alloy wire seemingly of constant dia 0.2cm circular section. One end heavily encrusted masking any additional feature (if any) there. Generally corroded all surfaces. Object bent/deformed. Length obove is of object assuming rectilinear sides.


description:
Copper/copper alloy plate ca 0.1 cm thick, 3.2 cm long, width varying from 1.1 cm at one end to 0.9 cm at other. Heavily corroded and encrusted. Item appears to have been bent longitudinally half way along its length and folded so the 2 ends meet forming an object with flat oval cross-section (dimensions above are of object so formed).


description:
Diameter is 0.15 - 0.2 cm. Both faces corroded and carrying encrustations which are masking any features.


description:
Longitudinal with seemingly rectilinear sides. Flat ellipsoidal in end profile. Original may have been rectangular in section. Heavily corroded and encrusted. Sides appear slightly divergent; width at one end ca 1cm, at other 0.8 cm.


description:
Longitudinal, heavily corroded and encrusted. Unable to discern form of section. In plan and side elevation, appears long rectangular.


description:
Very heavily corroded and in fragmentary state. Copper/copper alloy. Circular cross section dia 1.7. Height of bell 1.5cm. Fragment at top of hanging loop or hook. Adjacent is a circular 0.5cm dia ring of raised corrosion. Thickness of material <0.05. Within bell, corroded mass to one side, seemingly ferrous and with bulbous terminus. Substantially encrusted within this space. Would appear to be the clapper. On outer face of bell near lower edge a single decorative line around circumference.


description:
Material is mortar, with stones. 3 stones (one has become detached) adhered by mortar.


description:
Ellipsoidal in plan. In edge profile rectangular with rounded corners. On one long edge face 3, 0.1cm dia, equally spaced holes (0.5cm apart). On reverse face 2, 0.1cm dia holes 0.4cm apart. One outer hole of the triple group fully communicates with one of the double group. Dolphin vertebra; consumption refuse.


description:
Circular disc of glass, constant thickness 0.2 cm. One face carefully facetted to edge. Glass clear and translucent.


description:
circular in plan; flat ellipsoidal in profile; heavily corroded/ encrusted (slag?).


description:
Copper/ copper alloy, much corroded, with fissures and cracks; generally circular in cross- section; object develops to a rounded point.


description:
Roughly tear drop / amygdaloidal in plan, shallow domed in end profile; significantly corroded/ encrusted ( waste product of smithing?)


description:
Longitudinal, heavily corroded/ encrusted; at one end cross- section rectangular 1,4 cm by 1,2 cm; at ca. 3 cm along its length the object becomes flatter in profile an, in plan, sides become divergent; width at other end ca. 2,5 , thickness ca. 0,7 cm; 2 small fragments in bag appear to have separated from the bulk of the item and do not represent any extension of it.


description:
3 pieces in bag; all heavily corroded/ encrusted; unable to reconstruct in any meaningful way; entirely irregular (finder identified object as a bracket).


description:
Copper/ copper alloy object of consistent circular cross- section; straight for ca 2 cm then curved back on itself to form ellipsoidal end element ),9 cm long ),7 cm wide; green and white corrosion product; encrustation general all surfaces.


description:
Pyramidal, 4- sided, all sides convergent from base (4,5 cm by 4,5 cm by 4,5 cm by 3 cm) to a peak ( 1,8 cm by 1 cm by 1,8 cm by 1 cm); all corners rounded; fracture damage 2 base edges and one side.


description:
Amalgam of at least 3 pieces of potter's waste


description:
Significantly corroded/ encrusted; longitudinal; cross- section profile indeterminate; on end may develop to a rounded point (nail?)


description:
Longitudinal, heavily corroded/ encrusted; some green corrosion product at one end; cross- section profile uncertain; no evidence of tapering of sides.


description:
Irregular shape; 2 elements (1) rectangular block ca. 1,5 cm wide; (2) at one end of (1), ca. 2,2 cm protrusion at ca. 45 degree angle ca. 1 cm wide. All parts severely corroded/ encrusted; object heavy; at "base" of element (1) evidence of original iron core, circular cross- section 0,4 cm dia.


description:
In multiple fragments; main section and 2 pieces either end reveal longitudinal object with convergent sides terminating in a point; cross- section profile possibly rectangular but somewhat uncertain due to fragmentation of corroded material; appears to be a nail.


description:
Irregular shape; generally longitudinal, cross- section indeterminate; heavily corroded/ encrusted (slag?)


description:
Copper/copper alloy (green corrosion product); long element with convergent sides (from 0,5 cm width to 0,2 cm); at wider end, waisted and extending to semi- circular element 0,3 cm by 0,7 cm wide of same thickness and in same plane originally but which appears to have been bent back upon itself; encrustations all surfaces.


description:
Roughly circular; heavily encrusted both faces; smooth rim.


description:
Irregular shape, heavily encrusted/ corroded; longitudinal; developing to a point visible at one end; at other end is end profile of elliptical hollow object 0,7 cm by 0,4 cm- central cavity 0,2 cm by 0,1 cm; object is bent slightly in profile.


description:
Significantly corroded/ encrusted; possibly longitudinally folded plate; slight bend in plan; domical in end profile; longitudinal fissures top and bottom (latter could be seam of fold).


description:
triangular; slightly curved/ bent in profile; green corrosion product generally both faces.


description:
longitudinal; heavily corroded/ encrusted; cross-section uncertain through loss of material (part of nail?)


description:
roughly spheroid mass; heavily corroded/ encrusted; deeply fissured; flat "base"; slag?


description:
heavily corroded/ encrusted mass, ellipsoidal plan and cross-section; deep cracks/ fissures (slag?)


description:
roughly ellipsoidal (plan and cross- section) mass; heavily corroded/encrusted; fissured- slag?


description:
heavily corroded/ encrusted; deep fissure; cross- section roughly ellipsoidal; sides appear convergent to rounded point; some encrustation(?) stands 1 cm above plane of object at "wide" end.


description:
heavy; much corroded/ encrusted; roughly 4 sided, of rectangular cross- section 2cm by 1,4 cm; 4 "sides" convergent to form pyramidal shape terminating in flat apex 1,4 cm by 1 cm. 4 "sides" convergent to form pyramidal shape terminating i9n flat apex 1,4 cm by 1 cm.


description:
elliptical in plan and cross- section; at one end protrusion 1 cm wide stands 1 cm above plane ( could be an encrustation); heavily corroded/ encrusted (slag?). Finder identifies as bracket.


description:
Bulbous mass, heavily corroded/ encrusted, deep fissures (slag?)


description:
Bulbous mass heavily encrusted/ corroded, sides appear convergent in conical fashion (slag?)


description:
Mass of corroded/ encrusted iron of no definite shape, no visible sign of original material, (slag?)


description:
Irregular shaped mass, heavily corroded/ encrusted (slag?)


description:
Segment of grindstone; outer edge beveled out to base; upper face slopes inwards from circumference fro 6 cm width to 5 cm width where it meets shallow convex molding; bottom face plain save for a roughly circular 3 cm wide depression 0,5 cm deep.


description:
Heavily encrusted both faces and part of edge, green corrosion product, suggestion of rim on one face.


description:
Heavily corroded and encrusted; rectangular cross- section; object tapers to a point on all faces (point of a nail?)


description:
Copper/ copper alloy stem like object of square cross- section; gradually convergent from ca. 5cm along stem from width of 0,25 cm to 0,20 cm. Also known as a Puken.


description:
2 parts- relationship between them unclear; heavily corroded and encrusted, so much so that cross- section profile unascertainable; generally longitudinal, total length 6,8 cm


description:
Heavily corroded segment of iron encrusted to stone; flattish or shallow convex cross- section.


description:
2 pieces which fit together to form object total length 8,5 cm (major part 5,6 cm; minor part 4 cm); significantly corroded, encrusted; longitudinal; originally cross- section probably rectangular (ca. 1,5 cm by ca. 2 cm); lengthwise deep fissures; object appears to taper to a point.


description:
Copper/ copper alloy; green corrosion product both faces and edges; generally encrusted; sides diverge from 0,7 cm wide to form spade or spatula like blade 1,3 cm wide.


description:
Squarish, relatively flat mass of heavily corroded/ encrusted iron; original form impossible to determine.


description:
Irregular shaped fragment of limestone; one face bears molding, 1cm wide recess followed by ca. 2cm wide convex molding; reverse face has single step molding 0,3 cm deep along same axis as the convex molding.


description:
Heavily corroded/ encrusted object with deep transverse fissure; reverse side suffered loss of material; impossible to ascertain original shape or cross- section.


description:
Segment of copper/ copper alloy disc- probably coin; green corrosion product and encrustation both faces; no discernible features.


description:
2 pieces which fit together to form longitudinal object bent in profile; tapers from "head" of ca. 2,8 cm to a "point" 1,2 cm; significantly corroded/ encrusted; deep fissures and cracks; unable to determine original profile of cross- section but possibly was circular.


description:
Roughly oblong piece of indeterminate cross-section; significantly corroded/ encruste3d; deep longitudinal fissures; probably part of nail.


description:
Irregular shaped mass, significantly corroded/ encrusted; deep fissures/ cracks; cross- section roughly oval/ elliptical.


description:
Copper/ copper alloy spike like object of more or less square cross- section; sides gradually converge from width of ca. 0,8 cm to ca. 0,6 cm over a length of 10 cm. At ca. 1.5 cm from other end all sides step down (beveled step) to width of 0,4 cm; end shows fracture damage; other end terminates with a stepped flange 0,9 cm wide which appears to have suffered bend damage; flange of tool has green and white encrustation; damage to upper edges appears to have occurred and one face has 2 cm long 0,2 cm wide indentation.

notes:
Possible balance beam for scales; item of similar configuration in Preserve museum.


description:
Small circular and domical mass of heavily corroded iron; much material fallen away; presence of some green corrosion product; deeply fissured across and about object (slag?)


description:
One face (obverse?) reveals clear 0,10 cm rim with omega/ rho monogram with cross arms; to the left cross arm letter "M"?; feature to the right arm unclear; encrustation masks lower half of the "rho" stem; reverse face almost entirely encrusted; some evidence of a  rim and suggestion of feature near top edge which cleaning should reveal. Possible 10 th cent based on comparable in museum


description:
Curved item (total length 7,8 cm), of circular cross- section, one end very heavily encrusted and unable to determine whether object has constant circumference or tapers; generally much corroded/ encrusted.


description:
Various fragments of relatively squat vessel; base diameter ca. 12 cm, at hips ca. 20 cm; waist decorated with single concentric ring at shoulder level; body of vessel decorated with series of vertical ridges ca. 1 cm wide punctured by pairs of ca. 0,15/ 0,20 cm holes. Between each pair of the ridges is placed a single convex 1,5 cm dia protrusion encircled by ring of 0,15/0,20 cm holes; placing of holes and creation of ridges done without great care or concern for symmetry.


description:
Rectangular block, one long edge of which has recessed step molding 3 cm wide by 3,5 cm deep along whole length; at one end is a half round (3 cm dia) ca. 1 cm deep notch cut into upper face. One end face fractured, other finished and bearing chamfer ( which could be simple fracture damage at an edge).


description:
Section of arch carrying single recessed step molding 8,5 cm from extrados 4 cm wide 3 cm deep; other surfaces plain; appears to be single unit, neither end face appears to show fracture damage.


description:
Section of arch with single step recessed face, 7 cm fro extrados, 4 cm deep; all other faces plain; upper surface (crown) has been worked flat provide seating for more masonry; appears to be single unit, neither end face appears to show fracture damage.


description:
Longitudinal, significantly corrosion/ encrustation; cross- section flat domical (slag?)


description:
Roughly finished block rectangular in shape; one face has 0,8/ 0,9 cm long 5 cm wide notch inserted at one edge 9 cm from long edge; one end face has very roughly made step molding ca. 7 cm wide, ca. 2 cm deep.


description:
Bulbous, longitudinal mass corroded/ encrusted; from one end projects a 1,5 cm section of original object square/ roughly rectangular cross- section (1,1 cm by 1,1 cm); form of remainder unascertainable.


description:
Roughly square block (one corner lost to either damge or rough finishing) out of which deep 10/ 11 cm depression has been formed (radius 13 cm).


description:
Irregular shaped fragment; one face has rounded or chamfered step molding 2,5 cm wide, 2 cm deep.


description:
longitudinal; circular cross- section; copper/ copper alloy- green corrosion product; much corroded/ encrusted along whole length.


description:
Heavily corroded/ encrusted, square in cross-section, all sides converging to a point; at other end elliptical element set to one side (1,4 cm by 1,2 cm) appears to be head. Object has suffered minor bend damage.


description:
Longitudinal, significantly corroded/ encrusted along whole length; suggestion that sides may be convergent; cross- section profile uncertain.


description:
Copper/ copper alloy; heavily damaged/ distorted element ca. 1 cm long, roughly pyramidal, out of which projects hook like element formed by 0,2 cm thin wire being folded around back on itself.


description:
Heavily corroded/ encrusted; central element of roughly circular cross- section, 1,2 cm long inner aspect, sides possibly divergent from 0,4 cm to 0,5 cm; at both ends object turns through 90 degrees in same plane; one end is flat triangular in shape, terminating in a point; the other bulbous in appearance 0,9cm in dia; exact configuration heavily masked by encrustation.


description:
Length of copper/ copper alloy strip uneven width; torn/ damaged ends; corroded (green product)/ encrusted; suffered slight bend damage centrally.


description:
Iron plate (in 2 parts in bag), total length ca 10,8 cm, varying width (2,5 cm to 3 cm); constant thickness; heavily corroded/ encrusted; one piece attached by concretion to a stone.


description:
4 pieces in bag; measurements are of the largest piece; all are longitudinal; exact relationship between them uncertain; the largest piece has protrusion ca. 1,4 cm from one end, from side ca. 0,5 cm wide, 1,2 cm long, projecting laterally from the edge but bent through 90 degrees; this element has notch 0,2 cm deep 0,3 cm wide cut in upper edge.


description:
6 fragments, total length ca 18 cm (not all fragments fit), varying width (2,2 cm to 2,4 cm); 2 fragments bear bulbous elements (1,2 cm to 1,5 cm dia); heavily corroded, encrusted.


description:
Bulbous mass, heavily corroded/ encrusted.


description:
Almost full hemisphere of grindstone (recent crack at one end); projected diameter of complete stone ca. 18 cm; central hole 4,5 cm (half remaining); one face gently convex, rough; other face relatively smooth; evidence of radial groove extending from central hole to circumference.


description:
Conical object, ellipsoidal base, rounded apex; much encrusted all surfaces.


description:
Corroded and encrusted, particularly one face; no discernible features.


description:
Irregular shaped mass; heavily corroded/ encrusted; (slag?)


description:
2 elements: Element 1 comprises 2 plates 0.7 cm wide each decorated with narrow fillet 0.2 cm at and around circumference; within this assorted engrave, generally vertical lines; from plate has vertically hinged element surrounded by cast lion figure; reverse side plate is pierced by a 0.7 cm x 0.5 cm lozenge shaped hole; surmounting the plates in vertical plane at one end a 2.3 cm high 0.6 cm wide projection with hole 0.5 cm dia facing longitudinally to receive circular rod of: element 2 which has 1 cm wide lug lower end and circular rod upper; the lug located in the end face aperture of element 1; both elements decorated with cast lion figures.


description:
Fragment outer circumference, chambered edge?; faces and edge rough; lower face flat but scored with series of parallel striations and pitted


description:
Curving fragment, gray/black; regular circular cross-section


description:
Heavily corroded/encrusted; seemingly 2 elements, longitudinal, fused together; large element roughly rectangular cross-section; sides convergent from 1.7 cm width to 1.2 cm possibly part of nail; other elements indistinct through encrustation.


description:
Heavily corroded/encrusted triangular fragment; copper/copper alloy plate/strip.


description:
Fragment iron strip; regular thickness, rectilinear parallel sides; heavily corroded/encrusted; one end cut obliquely.


description:
Fragment; heavily corroded/encrusted; uniform thickness; rectilinear sides gradually convergent.


description:
2 pieces which fit together; longitudinal; heavily corroded/encrusted; appears to be strip 0.6 cm wide, broadening to 1.2/1.1 for 2 cm; then reducing to 0.5 for 1 cm.


description:
Heavily encrusted/corroded; at base appears to be fragment of iron plate of irregular shape; but heavy bulbous mass of encrustation masks any further identification.


description:
Solid copper/copper alloy bar; constant diameter; slight curve in one plane; on convey face lateral striations and deep 0.2 cm wide, 0.1 cm deep groove; on that face also a 1 cm long shallow gash.


description:
2 pieces; fragment of strip; heavily corroded/encrusted; distorted through bend damage; sides converge to a point for 1.6 cm.


description:
5 fragments, exact relationship between them cannot be ascertained; (measurements of largest); corrosion encrustation severe and masks any features; one element appears to be fragment of iron bar ca 1 cm wide, possibly part of nail.


description:
Heavily corroded (green product) and encrusted; strip of constant thickness; Rectilinear sides (but perhaps gently curving) converge to a rounded point; bend damage.


description:
Almost complete; 2 adjacent segments removed from circumference; one face; rim visible and profile suggests detail will be revealed on cleaning; other face; encrustation masks features; generally corroded.


description:
Irregular shaped mass; heavily corroded/encrusted (slag ?)


description:
Heavily corroded copper/copper alloy and iron; one surface flat, the other irregular mass of encrustations; one element appears to be fragment of bronze; strip forming the flat "base".


description:
Heavily encrusted/corroded; fragment, straight parallel sided; end torn/ broken.


description:
2 pieces which fit; containing traces molten metal; possible deep crucible.


description:
Heavily encrusted, corrosion (green product); no discernible features


description:
Fragment; rounded profile; reddish brown glaze exterior surface.


description:
Irregular shaped; heavily corroded/encrusted; generally longitudinal but no real form detectable


description:
Fragment, longitudinal; one long side rectilinear, the strip varies in width (0.4cm-0.6cm); slightly curved in edge profile; heavily corroded/encrusted.


description:
2 fragments fit together (total length 2.2 cm); elongated heavily corroded/encrusted; each end develops to a point; flat elliptical end cross-section.


description:
Heavily encrusted/corroded item of uncertain form; one end of roughly circular cross-section 0.6 cm dia visible; generally appears to be fragment of plate.


description:
Longitudinal, uniform width; flat one end and rounded at other; waisted 2.5 from flat end, 2 triangular shaped elements (base 0.4 cm) project laterally 0.6 cm one each side; above them 2 cm long semi elliptical element with rounded top 1.5 cm dia.; top and bottom elements each have a single hole 0.4 cm fully piercing; one face plain; other face has central channel between the 2 holes 0.6 cm wide, 0.2 cm deep some fracture damage at upper edge.


description:
Much corroded/encrusted; fragment of copper/copper alloy strip.


description:
ellipsoidal in plan; flat domical edge profile; rounded edges; incised with notches, 0.5cm-0.6cm long radiating from center, to circumference; in cross formation; at center, and between each notch a circle 0.4cm diameter with central hole; reverse face plain.


description:
quarter fragment of circular pice, lightly encrusted both faces; main face: has wide shaven concave band center, pierced by at least 2 holes at 0.5 cm diameter; at edge 4 alternating wide and narrow rings; on reverse face wide outer band (1 cm) then 0.05 cm step out for central band.


description:
flat, irregular shaped; heavily corroded/encrusted; hole off center (corrosion?).


description:
flat, roughly triangular; very corroded/encrusted; some material loss on one face


description:
seemingly solid copper/ copper alloy bar of circular cross- section; straight parallel sided; heavily corroded (green product)/ encrusted; at one end a 0,3 cm slot cut across full diameter of face.


description:
Segment from center to circumference; slightly curved in end profile; underside gently concave with concentric grooves/ striations; edge gently beveled; upper face gently convex, relatively rough finish.


description:
Roughly square in plan; hemispherical in end cross- section one end; top and bottom faces converge to a single edge at other end.


description:
Roughly rectangular fragment copper/ copper alloy strip; corroded (green product)/ encrusted.


description:
Roughly oblong limestone block, rectangular in side and end cross- sections; 2 sides contain carved annular depressions of varying diameters (3,0 cm, 3,3 cm, 3,8 cm) varying widths of rings (0,4 cm, 0,5 cm, 0,8 cm).


description:
2 pieces, roughly square pressed against and corroded with each other; general corrosion (green product), encrusted.


description:
Length of copper/copper alloy wire, uniform circular cross- section; straight parallel sided for 5 cm then end flattened to 0,15 cm thickness, 0,4 cm wide spade like element; heavily corroded/ encrusted.


description:
"L" shaped fragment copper/copper alloy strip; heavily corroded/ encrusted


description:
Roughly triangular; one edge torn and folded back; 2 straight sides meet at apex; general corrosion (green product), encrustation.


description:
3 pieces; heavily corroded, encrusted, fissured with material loss; 6 cm long straight parallel sided shaft of roughly circular cross- section 2,5 cm dia; then developing into curved hook element, half round 6 cm external dia.


description:
Tapering length of bone, slightly curved in 2 planes; at wide end, hemispherical cross- section for 5 cm then becoming almost fully circular ( last 4 cm fully circular); point has been lost to fracture; longitudinal crack from tip extending 7 to 8 cm; medullary cavities central at wide end.


description:
small fragment iron plate, one edge suffering concave cut/ tear; straight parallel sided and one straight end; much corroded/ encrusted; slightly bent in end profile.


description:
Roughly spherical; much corroded (green product); 0,1 cm protrusion from surface.


description:
Longitudinal oblong roughly parallel sided; at each end pierced by a 0,4 cm hole; edges rounded; one face plain; reverse side has 1 0,3cm wide, 0,2 cm deep groove extending centrally and longitudinally.


description:
Fragment, rectilinear parallel sides; ends broken and torn; corroded heavily, encrusted both faces.


description:
Roughly "L" shaped; very heavily corroded/ encrusted, fissured; appears to be rectangular 1,5 cm thick section; at one end projects a spatula shaped element 1,7 cm wide, ca. 0,5 cm thick, this turned through 90 degrees to the plane of the first element- suggests a tool part.


description:
Irregular shaped mass copper/copper alloy; heavily corroded/encrusted.


description:
Almost semi- circular section of torus; upper and lower faces plain; face molded; shallow concave 2 cm wide and 5,5 cm wide half round moldings.


description:
4 fragments; heavily corroded/ encrusted; sides generally rectilinear and convergent (0,7 cm to 0,4cm); wider end bulbous for ca. 1 cm then uniform thickness ca 0,1 cm.


description:
heavily corroded/ encrusted; constant thickness; appears to be fragment of iron strip 2 cm wide from which a quarter round element has been removed, radius o,7 cm.


description:
Thin strip, slightly curved in profile; Heavily corroded/encrusted


description:
Fragment iron plate ca. 0.2 cm thick; heavily corroded/encrusted; irregular shape in plan


description:
(Total length 9.7 cm); 4 pieces all heavily corroded/encrusted; uncertain how (or even if); the 4 pieces fit; one piece 3 cm long terminates in elongated point from a narrow 0.3 cm wide strip (slight bend damage); another piece 2.7 cm long has convergent sides forming spatulate shape; other pieces are fragments of roughly circular 0.3 cm dia wire.


description:
3 fragments; total length 4.5 cm; heavily corroded/encrusted; rectilinear parallel sides, one end turn laterally bend damage.


description:
Fragment apparently glazed ceramic exterior (white or cream); rough surface - shallow bowl; residues inside including copper.


description:
Heavily corroded (green product)/encrusted; ca 1 cm stem with round cross-section 0.25 cm dia developing into spatulate terminus 1.2 cm long 1.1 cm wide at end.


description:
copper/copper alloy; green product on all surfaces; circular in plan; mouth 18cm-18.5cm with one lip 3cm wide, 2cm deep; 1.5cm below lip of mouth a 1.5cm wide convex molding; object then expands in diameter to maximum 19cm, 13cm below lip; dents to section around base and one to mid-face; on either side in upper molding 3 holes 0.4/0.7cm, 1 cm apart (to receive handle); single seam 13cm long descends vertically from lip sides rounded to 12cm diameter base with a 0.3/0.4cm, 6.5cm diameter convex (viewed from inside vessel) flat protrusion; one long ca. 12cm gash at base, and 6 holes elsewhere; front part of lip edges have corroded away from body.


description:
Slightly curving, solid iron of roughly ellipsoidal cross-section; much corroded/encrusted, fissure.


description:
2 pieces, both heavily corroded/ encrusted; large piece, arrow head shape in plan; at one end shoulders slope to 2,2 cm wide, ca. 2,5 cm long 0,4 cm thick element turned up from plane by ca. 60 degrees; at other end long sides converge almost to a point where there appears to be the remainder of a ring. Coupled with that ring is another ringed item, fused/ corroded together; underside flat. Small piece; 6,5 cm long, 2 arms, one 2,5 cm, other 3,8 cm, each terminating in a small hook.


description:
Roughly circular in plan; heavily corroded/ encrusted; on one face a longitudinal element extending along the line of the diameter, commencing ca 3 cm in from one edge and projecting 2cm beyond edge at other side, comprising a number of disparate parts, exact relationship unclear. Reverse face mainly flat but significant area (8 cm by 6 cm) of encrustation at one edge masks any feature there; a triangular notch or cut occurs at circumference 1 cm wide, 2 cm deep.


description:
2 pieces which fit longitudinal, roughly square end cross-section; heavily corroded, encrusted, fissured; material falling away; at one end "sides" convergent, towards a point possibly part of a nail.


description:
longitudinal iron element with, centrally, and at right angles to it, fragments of wood; within the wood fragment are 2 (?) iron elements; the first nailed element resembles a pick head, one arm 3.5 cm long, having convergent sides to a rounded point; the other 2.5 cm long, having a flat spade like appearance; between the 2 arms is a raised rounded element 2.5 cm (socket?); all heavily encrusted/corroded.


description:
slightly curving in plan; uneven thickness (0.2-0.3 cm); roughly "J"-shaped; corroded/encrusted.


description:
rim and detail suggested both faces; on one face, standing figure, sigma (sp?) to the right; profile indistinct other face.


description:
fragment bronze strip/plate bent around almost to a semi-circular cross-section; heavily encrusted/corroded; edges damaged/torn.


description:
flat (0.6 cm thick) rectangular element (8 cm x 2 cm); at one end projecting laterally perpendicular to long side, a narrow element (1 cm long x 0.4 cm wide); seemingly part of a rectangular end plate, one corner of which is visible (thickness 0.2 cm); at other end, arising out of the face a mass 1.3 cm high, 1.7 cm across, slightly domed; end appears slightly curved with lug-like protrusion; 0.4 cm long & 0.2 cm wide projecting laterally; heavily encrusted/corroded.


description:
fragment longitudinal, heavily corroded (green, white product); has been folded back on itself; along its whole length (width of original strip 1.1 cm); ends broken/torn; sides uneven (except along the fold).


description:
roughly "J"-shaped (NOT a fragment o an originally circular object); cross-section profile at ends differs; at one ellipsoidal 0.8 cm by 0.6 cm; at other flat domical, 0.85 cm wide by 0.5 cm thick; item twists through 25 degrees and changes plane


description:
iron bar, rectangular cross-section 0.7 cm x 0.4 cm; after 2.5 cm bent across the wide dimension through 90 degrees; after 3.5 cm through 180 degrees; after 2 cm through 270 degrees; after second bend sides converge to form a point 2 cm after third bend; heavily corroded/encrusted


description:
fragment iron strip 0.2 cm thick; heavily corroded/encrusted; slight bend transversal about halfway along length


description:
(4 parts, 2 major, 2 minor); longitudinal with convergent sides in plan from apparent width 2 cm to 1.5 cm; at 1.5 cm from end, one side obliquely cut to form point with other side; opposite end indistinct; heavily corroded/encrusted.


description:
roughly circular, rounded edge, central hole 0.7 cm diameter; end profile rounded wedge-shaped (max. thickness 4.1 cm, min. 0.8 cm); both faces bear lateral striations


description:
irregular shaped, flat but varying thicknesses (0.5 cm - 0.9 cm); slightly concave on one face; 4 clear rounded edges; one face has 0.7 cm diameter depression crater; enormously corroded and disintegrating; 2nd piece - exact relationship unclear.


description:
fragment, rectilinear parallel sides; very corroded/encrusted; appears to be piece; total width 2 cm which has been folded.


description:
fragment, roughly rectangular (no rectilinear sides); one face carries pattern of incised lines in geometric pattern (nested boxes and perpendicular lines crossing); incising very roughly executed; fragment only of total game board.


description:
longitudinal, heavily corroded/encrusted; at one end there is a perpendicular projection 2.8 cm long; deterioration and encrustation so bad that formulation of object impossible to determine.


description:
heavily encrusted; segment of copper/copper alloy 0.5 x 0.4 x 0.05 cm; projects from bulbous encrustation mass.


description:
roughly rectangular plate-like element 4 cm wide x 4.2 cm long x 0.2 cm thick; sides appear originally to have been parallel rectilinear; at one end gently sloping shoulders converge to a socket element 1.1 cm wide, 0.9 cm long; cross-section of which was seemingly circular but now distorted/flattened; possible tool head; heavily corroded/encrusted.


description:
cup-like element distorted in plan but originally circular (diameter 0.9 cm); depth of "cup," 0.5 cm; affixed centrally to the base but bent slightly to one side; a ring element, ellipsoidal (0.4cm x 0.3cm) corroded/encrusted; inner part of "cup" filed with soil but seemingly did carry a stone or glass insert; thickness of "cup" wall 0.05cm.


description:
irregular shape; heavily encrusted/corroded; generally flat in end profile but with longitudinal bulge 0.7 cm wide along one side.


description:
fragment, slightly curved in end cross-section; sides divergent (from 1 cm to 1.3 cm); convex surface bears evidence of transverse bending either end (2 bands at each end); encrusted/corroded.


description:
2 pieces (one fits on top of the other); seemingly 2 (or more) fragments of iron plate (0,3 cm thick) of irregular shape fused/ corroded together; heavily corroded/ encrusted.


description:
2 pieces which fit together forming elongated chain link of roughly circular cross- section (0,9 cm dia).


description:
Irregular shape; heavily corroded/ encrusted; bent and torn; one straight edge.


description:
Molded 2 faces; rounded front edge; one face has shallow ca. 2 cm wide concave molding and a narrow 0,2 cm wide, 0,1 cm deep channel ca.2 cm from edge; reverse face simple rounded convex with longitudinal striations.


description:
Roughly square fragment; heavily encrusted; 2 parallel rectilinear sides and one edge at right angles; other edge torn/ broken.


description:
Roughly oblong in one plane but with uneven edges; tear drop profile in another; object heavily corroded and has suffered loss of material; encrustation particularly one face; possible tool head part; (2 other small pieces in bag which do not seem to have any relationship)


description:
fragment; 2 finished surfaces, outer convex, inner concave; thickness varies (3.5 cm, 3.0 cm, 4.7 cm).


description:
Partial shaft, ellipsoidal cross- section 0,6 cm long, 0,6 cm wide; shaft connects to head eccentrically; head incomplete (originally circular) 1,4 cm dia; heavily corroded/ encrusted.


description:
heavily corroded/encrusted mass of no discernable shape.


description:
Length of copper/ copper alloy bent twice thus forming a "U" shape; 0,5 cm before one end sides diverge to form spatulate shape 0,4 cm wide, 0,1 cm thick; remainder of item is roughly circular cross- section 0,15 cm dia; total length ca. 3 cm.


description:
Heavily encrusted/ corrode; no features discernible; small notch (0,1 cm deep) cut from circumference (0,2 cm wide)


description:
fragment, 2 opposing faces finished, one finely, other roughly; on return edge 2cm wide finely finished shallow concave molding at raked angle.


description:
flat, roughly rectangular plate; at one corner side extends to form side of a 1.4 cm long 1.2 cm wide lug-like extension from one edge --on same plane; heavily encrusted/corroded (with encrusted stones masking any feature extending in a vertical plane out of the object).


description:
Long conical shape formed by folding round 0,1 thick copper/ copper alloy sheet; edges overlapping at seam; wide end 1,2 cm outer diameter; narrow end 0,7 cm outer diameter; generally corroded/ encrusted.


description:
Segment (about a third of upper part); upper element of omega/ rho monogram visible on one face, and rim; no feature visible on reverse; generally corroded/ encrusted.


description:
Fragment, roughly triangular shape, one rectilinear side; corroded and encrusted.


description:
irregular shaped, heavily corroded; much loss of material/encrusted; part of originally solid iron object.


description:
fragment copper/copper alloy strip 2.2 cm wide; 2 parallel rectilinear sides; one side folded obliquely across body of object; heavily corroded/encrusted.


description:
Fragment rectangular object, parts of 2 rectilinear parallel sides and one edge, chamfered corners; one face plain, other decorated; at edge single line following edge, central longitudinal line, either side of that line one double row, one single row holes with concentric rings encircling them; holes 0,2 cm dia; reasonably roughly executed work.


description:
"U"-shaped, flat in cross-section, possibly originally iron plate; 0.2 cm thick (blunt toothed end of such material); remainder heavily corroded/encrusted.


description:
Longitudinal apparently knapped both faces creating edge all round circumference; one edge appears to have been knapped to create an oblique edge between the 2 long sides.


description:
irregular shape, flat in cross-section (0.3cm thick); heavily encrusted/corroded.


description:
Length of 0,3 cm dia round cross- section copper/ copper alloy; at end of shaft is 0,7 cm long elliptical (0,5 cm wide, 0.05 cm thick element (probably containing a hole but presently masked by encrustation and corrosion; after 5 cm half round turn 2,9 cm outer diameter, terminating in 0,6 cm barbed hook, 0,4 cm wide, 1 cm thick.


description:
0,4 cm wide, 0,1 cm thick copper/ copper alloy strip bent around across wide face to form an eye 0,6 cm dia; from the eye sides and edges converge over 3,8 cm to a fine point; generally corroded (green product) and partially encrusted; slight bend damage.


description:
Containing traces of molten metal; thickness of object wall 0,4/ 0,45 cm.


description:
heavily encrusted/corroded; no features discernable.


description:
heavily encrusted both faces; suggestion of rim one face.


description:
segment; parallel rectilinear sides in plan; flat domical in end cross-section; 0.4 cm thick, 0.8 cm wide; inner aspect flat, outer curved; in side plan curved; black.


description:
cubular mosaic tessera, light blue, partly fragmented away but 4 clear edges survive


description:
segment; round in end cross-section; sides parallel rectilinear; blue (dark and light separated).


description:
"L"-shape, comprising flat plate-like element; 0.8 cm wide, 3.5 cm long, 0.2 cm thick; at end, sides converge for 0.6 cm to form point; at other end a 0.6 cm wide 1.2 cm long, 0.3 cm wide element projects above plane of the plate; exact manner of connection between the 2 elements uncertain through encrustation but seemingly is a 90 degree bend; heavily corroded/encrusted.


description:
roughly "L"-shaped; one "leg" comprises a flat rectangular (0.8 cm x 2.5 cm) section terminating in a forked end with 2 "prongs" 0.5 cm wide x 0.6-0.7 cm long; one prong has been displaced from the horizontal by 45 degrees and laterally by almost 90 degrees; other "leg" too heavily encrusted to ascertain formulation; dimensions are 0.8 cm wide, 3 cm long, 0.3 cm thick; at end is either a 1 cm x 1 cm accretion or part of object


description:
almost completely corroded, disintegrating, heavily encrusted; original appears to be fragment of iron plate.


description:
Longitudinal with gently convergent rectilinear sides, after 3 cm forming semi- circular end (0,7 cm dia); heavily corroded/ encrusted; it would appear object was originally hollow tube like with domical top, flattened by damage.


description:
In plan rectilinear sides diverge over 3,5 cm from 0,35 cm thickness to 0,75 cm; thereafter converge (slightly convex profile) over 1,5 cm to a point; at 1,3 cm from point a 0,5 cm hole; in side profile 0,5 cm long notch ( at non pointed end); sides gently diverge over 3,3 cm from 0,3 cm to 0,5 cm, then converge to the point; slight encrustation.


description:
Torn fragment copper/copper alloy strip; one rectilinear side, others irregular; slightly bent in edge profile; corroded/ encrusted.


description:
3 pieces in bag (relationship of one to the others unclear); fragments cut from copper/ copper alloy strip, curving cuts; corroded encrusted


description:
Irregular shape; flat (0,2 cm thick) cross- section; heavily corroded/ encrusted.


description:
trapezoidal in plan, rectangular on top and bottom edges (2.5cm x 1.5cm and 1.9cm by 4.2cm); side edges slightly convergent (1.9cm to 1.2cm width); on one face letter "N" incised; one hole 1cm below top (0.7 cm diameter); all edges rounded.


description:
lanceolate; sides converge for ca. 6.3cm to a point; at other end width of object reduces (manner unclear through encrustation) to ca. 1cm; then over 3cm convergent to rounded point 0.4cm diameter to form tangent.


description:
length of strip, 4 sided, 3 rectilinear sides; some encrustation and generally corroded.


description:
longitudinal, roughly rectangular cross-section 0.8cm x 0.7cm; at one end, flat plate-like element 1.2cm x 1.2cm (roughly triangular); midway along length of object is a wave shape bend (to which is accreted a stone); appears to be a nail.


description:
segment; flat ellipsoidal in end cross section (0.3cm thick, 1.1cm wide); in plan parallel rectilinear sides; internal line/chord of segment 3cm; height 0.7cm; blue with pattern of lines, circles, dots; translucent; slight damage on edge of one end.

notes:
comparators in Preserve museum (9th-12th Centuries)


description:
very roughly circular in plan; flat domical in end profile; face pierced by three 0.9cm diameter holes.


description:
encrusted/corroded; suggestion of rim one face; no other features visible.


description:
irregular shaped angular fragment of flint; uncertain whether knapped or naturally occurring.


description:
short length of bar, rectangular cross-section, 0.6/0.7cm by 0.4/0.5cm; corroded (iron oxides and green product); generally encrusted and very heavily a one end where material appears to bifurcate; sides parallel rectilinear.


description:
Heavily corroded/ encrusted; in plan ca 4 cm wide at one end (thickness ca 0,9cm); after ca 4 cm sides diverge for ca 6,5 cm to width 6,3 cm; edge slightly convex; thickness ca 0,7 cm; in end profile, from plane of the "axe", at narrow end, 2 side elements ca 2 cm wide, 3,5 cm long turned up through 90 degrees ( to form grips for handle?); in side profile, blade bends up from plane by ca 30 degrees.


description:
fragment head or part ring; corroded/encrusted; hexagonal head with depression for insertion of stone; haunches decorated with two lines of circles with central holes; the lines divided by ridge.


description:
Substantially corroded/encrusted; end fragment of a rectilinear sided object, curved end in profile (face and side); where material lost, interior reveals a 0,45 cm wide, 0,7 cm long, 0,2 cm thick iron spine like element.


description:
Heavily encrusted/ corroded; irregular shaped; flattish profile; (probably originally fragment of strip or plate).


description:
almost quarter segment; very pitted and weathered; reasonably constant thickness at circumference; rounded edge of circumference; object slopes inwards on one face towards center; other face flat.


description:
Segment; (arc length 2,1 cm, depth from circumference 0,9 cm), copper/ copper alloy wire, curved; round end cross- section (dia 0,15 cm); corroded/ encrusted.


description:
Longitudinal with bulbous mass/ accretions either end; substantially corroded/ encrusted.


description:
Longitudinal, heavily corroded/ encrusted; roughly ellipsoidal in cross section; probably length of iron bar originally with rectangular profile.


description:
"Fish" shaped; heavily corroded/ encrusted; generally flat (0,8 cm thick) side and end profile; at "tail" end sides (n plan) pinched to a width of 1 cm, 1,2 cm from end; in end face small notch 0,2 cm wide, 0,2 cm deep.


description:
Distorted in plan; corroded/ encrusted both faces; suggestion of rim both faces; no clear details on either face but profile variations suggests they will be revealed on cleaning.


description:
(2 pieces which fit); from eye rectilinear sides converge over 7 cm to a point; eye 1,5 cm long contains hole 0,5 cm long, 0,2 cm wide (elliptical)


description:
Hook shaped; one long element 3,1 cm long, 0,6cm wide; at 1,4 cm protrusion laterally 0,4 cm long, 0,7 cm wide; at end object turns through 90 degrees above plane for ca 1 cm then through further 90 degrees (180 degrees in total) back over itself 0,7 cm. This element has narrower width 0,5/0,4 cm. Heavily corroded/ encrusted.


description:
Heavily corroded/ encrusted; longitudinal element 4,8 cm long; end profile cross section appears circular/ ellipsoidal. At one end hook shaped element 2,2 cm dia external diameter, ellipsoidal/ flat cross section 0,6 cm by 0,4 cm.


description:
Oblong, generally rectangular all planes; in plan 2 holes both 0,5 cm dia, 0,4/0,5 cm from ends; surfaces lightly scarred.


description:
Triangular shaped fragment copper/copper alloy strip; encrusted/ corroded.


description:
Longitudinal with rounded end profile cross section; severely corroded and fissured (iron oxides and green product patches in 2 fissures and at both ends; substantially encrusted.


description:
Encrusted both faces; both faces have trace of rim; one face appears to show cross emblem with perpendicular bars at termini of arms (9th century?)


description:
Heavily corroded/ encrusted; distorted, lateral bend; suggestion of rim both faces; potential for detail to be revealed both faces.


description:
fragment 4-sided block partially fractured diagonally across face; reasonably constant thickness; one face has 9cm wide, 8cm long ca. 1.15cm deep slot, 7cm from one edge and parallel to it; 17cm from long edge face stepped down ca. 2cm; rounded corner one edge.


description:
Longitudinal; roughly rectangular in plan; severely encrusted; one corner appears to reveal iron plate 0,2 cm thickness; heavily corroded.


description:
Globular mass of indeterminate shape/ formulation; heavily encrusted/ corroded (slag?)


description:
Heavily corroded/ encrusted; no features visible one face; faint suggestions of profile/ details on other; rim.


description:
Longitudinal in plan; gently convergent sides over 4,4, cm length from width 1,4 cm to width 1.1 cm; in end profile curved (section through the bone); upper convex surface decorated; reverse concave, un finished, medullar cavities revealed; decoration comprises (from wide end) 2 lateral parallel wavy lines with dots, reticulate patterned area, lateral line of circles with concentric ring and inner  hole, 2 straight lateral parallel lines, undecorated space, 1 straight lateral line, 1 curved line; evidence of continuance of pattern shows this to be a fragment of a (possibly) tubular object.


description:
In plan rectilinear sided but convergent for 19 cm when one side obliquely cut to meet other side at rounded point at 24 cms length; in end and side profiles rectangular, all corners rounded; one face plain with one corner stepped 0,7 cm below surface, 5 cm across corner (slightly curved cut); other face has faintly incised lines at edge on plain face and on 2 sides.


description:
Fragment; translucent with brown patches along one edge a spine work of a line of semi- circular protrusions (pattern undulates in plan); conical element (roughly elliptical end section 2 cm by 1,8 cm); develops into rectilinear stem with sides convergent over 3,2 cm from 0,9 cm dia to 0,5 cm dia; depth of spine decoration ca 0,4 cm.


description:
Roughly circular in plan with central 0,9 cm dia hole; in edge profile roughly rectangular (3,4 cm by 1,6 cm); rounded edges; one surface exhibiting serious deterioration of material.


description:
longitudinal; roughly circular one end to rouhly elliptical other; heavily corroded/encrusted; fissured along length.


description:
Corroded greatly one face; heavily encrusted other; no discernible features.


description:
Roughly circular in plan with 0,9 cm not penetrating but 1,8 cm deep hole set eccentrically; in side profile skewed bell shape; rounded edges; base shallow concave 0,3 cm deep.


description:
Short fragment copper/ copper alloy strip (original size ca. 1,7 cm wide); corroded/ encrusted; long side bent and distorted laterally over and in towards each other.


description:
Severely corroded; partially encrusted; segment 1,3 cm long, ca 0,4 cm deep lost at upper left circumference; obv, omega/ rho monogram, rim; rev, faint suggestion of some detail (pedestal).


description:
Fragment decorated plaster; orange pigment background on which red pigment slightly curving band 0,5 cm wide connected at one end to fragment of another red pigment feature.


description:
fragment copper/ copper alloy wire, circular cross- section (0,2 cm dia); slightly curved (bent); corroded and almost fully encrusted.


description:
Rectilinear sided in plan, convergent over 5,5 cm from width 1,5 cm to 1 cm; one of sides is then rounded quarter round to meet other side to form blade end; other end broken; heavily corroded/ encrusted


description:
Irregular fragment, one roughly finished face, one corner contains notch, triangular in profile (5 cm base, 4,5 cm height).


description:
Circular in plan (1,2 cm dia) with central (0,5 cm dia) hole; in side profile spheroid.


description:
Rectangular in plan; wedge shaped edge profile; caused by fusing/ corroding together, one on top of other of 2 pieces copper/ copper alloy.


description:
In plan longitudinal with rectilinear sides convergent over 5,5 cm from 0,9 cm width to 0,7 cm; in edge profile sides also convergent from thickness of ca 0,4 cm to 0,3 cm; at narrow end object bent up ca 45 degrees for ca 1,3 cm; terminus uncertain through encrustation; at wide end object appears to bifurcate for ca 0,5 cm and appears distorted; heavily encrusted/ corroded.


description:
Fragment iron plate; constant thickness 0,3 cm; rectangular in plan; parallel rectilinear sides one edge, (other fractured); heavily corroded/ encrusted.


description:
"L" shaped; one "leg" 2 cm by 1 cm with rounded terminus; other "leg" 1,8 cm by 0,8 cm with 0,5 cm by 0,7 cm wide additional element at end turned up from plane by 90 degrees; heavily corroded/ encrusted.


description:
Heavily corroded/ encrusted; suggestion of rim both faces; no discernible features either face; double notch 0,6 cm long ca 0,2 cm deep cut from circumference


description:
Heavily weathered/ pitted segment circular object; ca 14cm bevelled edge visible; underside flat profile


description:
Small rectangular fragment copper/ copper alloy strip; heavily encrusted/ corroded.


description:
Well preserved; corroded (green product) and encruste3d; 0,6 cm long, 0,4 cm wide, 0,1 cm thick eye element (hole obscured through corrosion); shaft 5 cm long, circular, 0,3 cm dia cross section; hook element 2,7 cm external diameter terminating in barbed hook 1,1 cm long, 0,4 cm wide, 1 cm thick.


description:
Heavily encrusted/ corroded; rim partially visible one face; no other features ascertainable.


description:
Half fragment; encrusted/ corroded both faces; obv; upper and lower sections of omega/rho monogram, rim; rev; faint outline of pyramidal pedestal and suggestion of other detail which would be revealed on cleaning, rim; 11th- 12th cent?


description:
Heavily corroded/ encrusted; rims visible both faces; profiles on faces suggest cleaning will reveal features; none presently ascertainable.


description:
Copper/ copper alloy wire (dia 0,15 cm), double coiled; diameters of coils, 0,8 cm, 0,6 cm; corroded/ encrusted.


description:
Heavily corroded/ encrusted; fragment with rounded outer edge; otherwise irregular shape; flat in edge profile, reasonably constant thickness.


description:
Very heavily corroded/ encrusted; rim in fragile condition; no features visible.


description:
Fragment of copper/ copper alloy; roughly rectangular in plan; at one edge is a 3,5 cm long longitudinally curved lip, cross section thickness 0,2 cm. below that, thickness of the material is ca 0,1 cm; at one edge object bends out slightly along whole width (in opposite direction to the fold of the lip); on reverse face, at one corner (at the lip), a 1 cm by 0,7cm piece has been folded back onto surface or has accreted to it; generally corroded/ encrusted.


description:
irregular (roughly triangular); one polished face with single shallow 0.5cm wide, 0.15cm deep recess cut across face; 6.3cm below "apex" all edges fractured; reverse face roughly finished.


description:
Heavily encrusted/ corroded; no features visible either face; slight distortion in edge profile.


description:
obv; corrosion/ encrustation, rim, omega/rho monogram; rev; more heavily encrusted/ corroded; no details presently ascertainable but profile suggests may be revealed on cleaning.


description:
Flat 0,4cm dia base on which bowl section ca 1,4cm long 0,8 cm at widest, reducing to neck 0,6cm dia, 1,3cm long, after which sides diverge to form lip with rounded edge 0,9cm dia, slightly raised one side; mouth circular in plan, set eccentrically on stem; central hole dia 0,4 cm.


description:
very heavily corroded/encrusted, fissured; one fissured segment has become detached; longitudinal in plan with rounded edges; reasonably constant width; in end profile roughly circular (fragment of nail?)


description:
Stem ca 5,8cm slightly bent midway; constant dia 0,3 cm; at one end material flattens to strip, 0,25 cm wide and is bent half round, dia 0,3 cm to form a hook like element; much encrustation at this end; elsewhere generally uniformly encrusted; at other end, evidence of fracture.


description:
Heavily corroded/ encrusted; outlines of rim both faces; no other details visible.


description:
4 sided pyramidal structure on a roughly rectangular base; part of apex missing (including hole); some damage one side at base.


description:
Copper/ copper alloy; flat, circular head (dia 0,35 cm); below head sides converge over 0,2 cm to stem, circular cross section 0,15 cm dia; corroded/ encrusted.


description:
Spherical mass of copper/ copper alloy; corroded, fissured; lightly encrusted; no regularity to shape.


description:
Lanceolate; sides converge over ca 8,5 cm gently to a point (slight convexity to the sides); at other end evidence at 2,5 cm of a step reducing width (at start of tang?); no further detail ascertainable through significant encrustation; generally heavily corroded and encrusted.


description:
1 small fragment become detached; heavily encrusted one face; much corroded both faces; fragile condition; no features discernible.


description:
Fragment, one face molded with 4 cm wide, 7 cm long band of egg and dart (deeply cut eggs); return face flat, unadorned; fragment of door jamb or cornice?


description:
Circular in plan; central hole dia 0,9 cm; in edge profile flat domical; rounded edges; about half of base face lost through fracture damage.


description:
"L"-shaped, rounded at junction of 'arms'; heavily corroded/encrusted; appears originally to have been iron strip ca. 1.3/1.4cm wide, 0.4cm thick, bent through 90 degrees; one 'arm' 3.5cm long, other 2.5cm.


description:
Very heavily corroded/ encrusted; no features visible at all.


description:
Irregular shape; fragment iron plate; heavily corroded/ encrusted; 2 short sides appear rectilinear; opposite them, at one extremity, is a "U" shaped slot, 0,5 cm wide and deep.


description:
dimensions of the group: 6 hooks corroded together (one has become separated from the group); 5 small (7.8cm long), 1 large (8.6cm long); diameter of hook arc: 4cm large, 3cm-3.8cm small; all have barbs and eyes; all circular cross-section: large 0.4cm, small 0.25cm.


description:
heavily corroded/encrusted; object appears to have parallel curving inner and outer edges 4.3cm apart; other edges unclear through corrosion; reasonably constant edge cross-section of 0.7cm.


description:
heavily encrusted one face (obv), rim visible; other face rime and monogram (absolute despot); encrustation particularly around rim; all parts corroded; coin of Nicephoros Phocas?


description:
rev: corroded/encrusted; M (follis), star/cross above; unascertainable detail below and to sides (likely to be revealed on cleaning), rim; obv: heavily encrusted; profile suggests detail will be revealed on cleaning; rim; 6th Century.


description:
heavily corroded, damaged semi-circular fragment; base part of omega/rho monogram one face and rim; no details visible other face; disintegration at rim, cracks.


description:
roughly square in plan, ellipsoidal in end cross-section; mass of heavily corroded/encrusted, fissured; no discernable form or feature.


description:
segment, internal length 2.9cm; generally uniform circular cross-section diameter 0.4cm but at ca. 0.5cm from one end sides diverge to 0.5cm; blue.

notes:
on basis of like material in Preserve museum


description:
heavily encrusted/corroded; longitudinal element ca. 4cm long, ca. 0.7cm thick develops to rounded point (from ca. 1cm width to 0.5cm); a 1cm long, 0.8cm wide element protrudes laterally from one edge (0.5cm thick) with half-round edge.


description:
2 elements; larger, in plan convergent sides from width 1.1cm to 0.7cm over length of 1.8cm; inside profile rectangular, parallel rectilinear sides width 0.6cm; at narrow end a small element 0.4cm wide, 1cm long (square cross-section) projects perpendicularly above plane of the larger element; all ends appear fractured; generally corroded.


description:
segment; sides parallel and divergent (from diameter 0.45cm to 0.6cm); no visible pattern; encrustation; chord of segment (internal) 4.3cm; height (internal) 0.9cm.

notes:
comparators in Preserve museum - dated 9th-12th Centuries


description:
hook-shaped; 0.25cm diameter copper/copper alloy wire, after 4cm, bent three-quarters round; diameter (external) 2cm with final 0.5cm bent outwards 90 degrees; at this end, for ca. 1.5cm material thickens to diameter of ca. 0.4cm; generally corroded and encrusted, particularly at "hook" end; object slightly distorted out of plane at both ends.


description:
Circular cross section; rectilinear convergent sides, from dia 0,5 cm to 0,3cm; both ends fractured; shaft smoothed and engraved with reticulate pattern bounded by lateral encircling lines over 2,3 cm at wider end; one line at narrow end.


description:
heavily corroded both faces, and generally encrusted; deterioration/cracking at edge and centrally; coin has suffered impact damage to obverse causing concave distortion; obv: rim, omega/rho monogram; no features discernible other face; 11th Century?


description:
heavily corroded/encrusted; no details ascertainable either face.


description:
heavily corroded/encrusted; obv: rim, omega/rho monogram; rev: no visible features; 11th Century.


description:
corroded both sides and particularly heavily encrusted one face; traces of rim both faces; on one faint details of possible features.


description:
heavily corroded; very heavily encrusted one side; other face rim and some features on face but unable to ascertain form.


description:
heavily corroded/encrusted both faces; no features discernable.


description:
irregular shaped fragment copper/copper alloy; heavily corroded/encrusted; at one corner part folded over and fused together; otherwise constant thickness 1cm; all sides irregular.


description:
fragment; one side polished; reasonably constant thickness ca. 3cm; all edges fractured.


description:
segment; circular cross-section 0.7cm reducing to 0.6cm (sides convergent); encrustation general; internal chord of segment 4.4cm, height 1cm.


description:
heavily corroded/encrusted; rim visible one face; no other features ascertainable.


description:
heavily corroded/encrusted both faces; no discernable features.


description:
4 pieces which appear to fit; heavily corroded, partially encrusted; fragile state; constant thickness; rectilinear sides which convergent from width 0.3cm to 0.15.


description:
Fragment, 4 sided, trapezoidal; corroded/ encrusted (green and white product); constant thickness.


description:
Fragment; one face finely finished; other face roughly; consistent thickness (3cm- 2 cm); one side appears to have been roughly made rectilinear with 3 cm chamfer; other edges broken.


description:
heavily encrusted/corroded; stem 0.4cm wide, 1.5cm long, apparently parallel rectilinear sides; after which an elliptical shaped element ca. 1.1cm long, 1cm wide; whole piece appears to be of uniform thickness.


description:
3 pieces which fit to form irregular shape in plan, constant thickness; heavily corroded/encrusted; fragile state.


description:
circular in plan; central hole diameter 0.55cm; in end profile flat domical; ca. 0.05cm from base 2 incised lines 0.05cm apart encircle object; some fragmentary loss of material from face of base and from ca. 0.5cm of upper face; highly polished, red.


description:
Strip of copper/ copper alloy, parallel rectilinear sides, constant thickness; bent laterally midway, through almost 360 degrees to form elliptical eye 1 cm long, 0,5 cm wide; corroded/ encrusted.


description:
length of copper/copper alloy wire, bent once through 360 degrees forming an ellipsoidal "eye"; 0.8cm long, 0.4cm wide; remaining 1cm bent again through ca 45 degrees - all on same plane; encrusted/corroded.


description:
Heavily corroded/ encrusted; rims visible both faces but no other features; one face has profile which suggests features will be revealed on cleaning.


description:
Heavily corroded/ encrusted; three quarter fragment (1,9 cm long segment lost); rims visible both faces; faint trace of bottom part of omega/ rho monogram; no identifiable features other face.


description:
2 parts which fit (dimensions of complete piece); segment of torus; concave molding, fillet, half round convex molding.


description:
7 cm length of lead, rectangular (0,6 cm by 0,4 cm) in cross section; parallel rectilinear sides; after 4 cm bent through 90 degrees in same plane; ends rounded/ broken; generally corroded (white product), encrusted.


description:
heavily corroded/encrusted; 'v'-shaped; apparently elliptical end cross-section but true form masked by encrustation; one arm 3.2cm long, other 3.0cm; shorter arm has slight curve inwards in plan.


description:
Roughly circular; very heavily corroded/ encrusted; no identifiable features.


description:
Circular in plan; central hole 0,3 cm dia, edge profile rectangular with rounded edges.

notes:
Examples in museum dated 11th to 13th centuries


description:
Longitudinal with semi- circular end cross section. On "flat" face a fragment of tile/ brick, 7 cm by 5,5 cm, was found embedded sitting obliquely towards one corner of the plaster; tile/ brick fractured laterally ( 2 pieces fit one on the other).


description:
rectangular in plan; heavily encrusted/corroded; appears originally from evidence of one side and edge to have been fragment of plate/strip with parallel rectilinear sides; width 2.5 cm, thickness 0.15 cm; reasonably heavy. X-ray shows to have teeth--saw fragment?


description:
Longitudinal fragment; circular in end cross section (segment of originally tubular object); outer (convex) face carries incised decoration, 2 parallel transverse lines 0,1 cm from one end, 0,15 cm apart, series of slanting lines interspersed with holes, single transverse line, 0,15 cm from other end.

notes:
Examples in Preserve museum dated 9th to 12th cents.


description:
segment; circular cross-section; distance from line of arc to circumference 1.7cm; line of arc 4.5cm (inner aspect).

notes:
examples in Preserve museum (dated 9th to 13th Centuries)


description:
heavily corroded/encrusted; no features visible either face.


description:
irregular, 'p'-shaped in plan; 3 elements: 1.) roughly rectangular, 2.8 cm x 1.2 cm x 0.2 cm; ca. 0.5 cm from one edge and at right angle to it, in same plane; 2.) rectangular in plan (1.5 cm x 0.8/0.9 cm, bulbous in side profile; 3.) small triangular element, 1 cm x 0.7 cm at terminus of (2).


description:
ellipsoidal in plan; upper face gently convex with incised cross incisions 0.1cm wide and deep; at central junction a 0.15cm hole; at extremity of each arm a 0.15cm hole; at edge of one long side a longitudinal 1/2cm long 0.1cm deep step which on return edge forms to edge of an apparent fillet 0.3cm wide chamfer to underside; on opposite edge a lateral 1cm long gash ca. 0.1cm deep; reverse face slightly curving parallel to short sides; at radius 0.5cm a lightly incised concentric circle; 5th to 14th Centuries.


description:
curved segment; dark; circular cross-section 1 cm; distance from base of arc to circumference 2.6cm; base 4.3cm; decoration rope coil/serpentine.


description:
longitudinal; heavily corroded/encrusted; no original features visible; cross-section unascertainable through encrustation (possibly part of nail?).


description:
rectangular in plan - heavily corroded/encrusted; originally appears to have been fragment of plate (3.4cm x 1.5cm x 0.2cm).


description:
corroded/encrusted both faces; obv: omega/rho monogram, rim; rev: rim, pyramidal pedestal; circular elements either side; 11th-12 Centuries.


description:
segment; elliptical cross-section 0.65cm x 0.4cm; blue; distance from line of arc to circumference 2.2cm; inner aspect length of arc line 5cm; slight encrustation.


description:
2 pieces, exact relationship unclear; may fit one upon the other; severely corroded/encrusted; generally circular in plan; no identifying features whatsoever


description:
longitudinal, roughly rectangular in plan; heavily corroded/encrusted; originally appears to have been fragment of iron plate with rectilinear parallel sides and ca. 0.3 cm thickness.


description:
fragment; much corrosion/encrustation; plate/strip distorted/bent; one end to opposite corner.


description:
heavily corroded/encrusted; suggestion of rim one face; no other identifiable features.


description:
six fragments - in very fragile state; four fragments incorporate remains of copper/copper alloy wire; 0.1 cm diameter; wound/coiled; heavily encrusted/corroded.


description:
heavily corroded/encrusted length copper/copper alloy plate, bent ca. 45 degrees across width halfway along length; width varies end to end (2.6cm to 3.4cm to 3cm); torn and distorted edges.


description:
longitudinal; heavily corroded/encrusted; one end appears to develop to a point from ca. 1.5cm from end; less encrustation on one face at other end reveals object may originally have had flat rectangular end cross-section ca. 1cm x ca. 0.2cm; with rectilinear parallel sides for ca. 9cm of its length.


description:
segment?; substantially pitted/scarred; elliptical end cross-section in vertical plane at one end (0.75cm x 0.55cm) developing to circular at other (0.45cm diameter); both ends rounded; black.


description:
segment; pitted/scarred; white; circular cross-section (0.6cm diameter) for 3 cm (of line of arc) then sides convergent to end cross-section 0.4cm.


description:
traces of molten metal; thickness of ceramic, 0.5cm.


description:
irregular shaped - roughly triangular in plan; heavily corroded/encrusted; variable thickness (0.4cm to 0.7cm) due mainly to encrustation; possibly was fragment of iron plate/strip 0.2cm thick as suggested by part of straight edge; one side.


description:
triangular with rounded edges; consistent thickness 1.6cm; one face very smooth; some encrustation to other face and edges; lightly incised lines parallel to faces upper and lower parts of edges.


description:
segment; blue; spiral pattern; distance from line of arc to circumference 0.65cm; base-line of arc (inner) 2.9cm.


description:
fragment; roughly quadrilateral, one fractured side; other sides rounded and smooth; one face very smooth, gently concave; on edges incised marks; reverse face uneven but smooth.


description:
2 fragments which fit together (dimensions above are of reconstruced object). Longitudinal fragment of copper/copper alloy strip with irregular edges. Corroded and encrusted


description:
Longitudinal with rectilinear parallel sides in plan. At one end a semi - circular terminus. In edge profile sides rectilinear but appear convergent to semi-circular terminus, at which point thickness < 0.05 cm (from ca 0.15 cm). Heavily corroded and encrusted and this masks nature of other end


description:
Length of bone worked finely to circular cross section and rectilinear sides which after 3 cm converge to a point. Other end fractured; minor encrustation


description:
Mass of heavily corroded and encrusted material probably fragment of nail


description:
Spherodial mass, heavily encrusted and corroded, deeply fissured at one end. Visible remnants suggest fragment of nail


description:
Length of copper/copper alloy rod, appearent constant dia ca. 0.4 cm. Heavily encrusted and corroded. Appears gently curvilinear with an abrupt change in curve ca 0.2 cm from one end


description:
Almost complete lamp. Some scale loss from body. No decorative detail visible


description:
Irregularly shaped knapped fragment of flint. No obvious signs of being retouched. 3 sharp edges but unclear how object would be used as a tool


description:
Just over one half fragment roughly circular in plan, flat ovaloid - amygdaloid, in edge profile. One face has deeply (0.5 cm) incised, 0.1 cm wide Greek cross each arm terminating at disc edge with a 0.2. cm dia circular non-penetrating hole. Some scarring at edge


description:
Ellipsoidal in plan; flat domical in edge profile. Heavily corroded and encrusted. Appears to be raised stud like element central to the face. Edge profile reveals 3 elements, sandwich like. The central one is plate with parallel rectilinear edges 0.3 cm thick, between 2 thinner (heavily corroded) sheets - suggests riveted plate


description:
Rectilinear sided in plan, sides converge over 7 cm from width 2.4 to 2.1 cm. Fractured at both ends ca 1.0 cm from narrower end, object worked to produce a waist of ca 1.7 cm, 0.2 cm deep, 0.4 cm wide from which width again expands to ca 2.0 cm. Side faces decorated with 2 incised lines parallel to the long edge, 1 cm wide and 1 cm apart. Inner aspect has 1.1 cm wide, 0.2 cm deep cavity along whole length


description:
Almost complete example. Upper part has cleanly separated from the bowl. Bag contains a ca 1.5 cm long, 0.7 cm wide ceramic element of uncertain relationship (found in central hole)


description:
Heavily corroded and encrusted one face on which no features discernible. On other face, 0.1 cm wide border at edge within which omega/rho monogram with unidentifiable elements either side of it.


description:
Heavily corroded and encrusted copper/copper alloy object of constant thickness ca 0.1 cm. In plan elliptical 1.5 cm long, 1 cm wide. At one end a ca 0.7 cm lug projects in the same plane, of same thickness of reducing width (from ca. 0.4 cm to ca 0.15 cm) appears to be end of spatula-like instrument


description:
V. heavily corroded and encrusted longitudinal object. Unable to discern any feature of original item


description:
Longitudinal, one end squared off, the other well rounded and smoothed all edges and faces. No obvious area (s) of polish. Roughly oblong both plan and edge profiles


description:
Roughly rhomboidal shaped in plan. Reasonably constant thickness ca 4.7 cm. On one face 2 complete, 2 fragments of circular, 3.4 cm dia annular depressions (moulds for rings), ca 0.4 cm wide. Central mound of mould has 0.2 - 0.3 cm hole central


description:
Fragment iron plate with no apparent regular edges. Apparently constant thickness. Heavily corroded and encrusted


description:
Fragment of moulding (door or window architrave?) one face has ca 3.5 cm wide half round convex moulding in curvilinear form against flat plain face. Reverse face is gently concave and roughly finished to level surface. Piece may be related to SF. 3699


description:
Seemingly length of iron bar or rod (exact form of cross section unclear) bent through almost 90 degrees half way along its length. Heavily corroded and encrusted


description:
V. roughly square and flat, heavily encrusted and corroded. One edge appears to be curvilinear. No other regular features visible


description:
Longitudinal fragment, roughly rectangular in plan and edge profile. One edge slighly wider (1.4 cm) than other (1.3 cm) resulting in the one polished face appearing slightly bevelled. Ends fractured. White colour


description:
Roughly squarish fragment copper/copper alloy plate ca 0.1 cm thick. Possibly one regular, rectilinear edge. Both faces heavily corroded. On one face corrosion and encrustations form a mound. Particles of material freely flaking away


description:
Almost circular, heavily corroded and encrusted. Both faces have evidence of raised 0.1 cm -0.2 cm raised border at edge. All other features masked completely


description:
0.5 cm deep, 1.3 cm long section missing at edge. Heavily corroded and encrusted. Some evidence both faces of raised border ca 0.1 cm wide. No other features visible


description:
Heavily encrusted and corroded. One face all features obscured. Other face omega/rho monogram and evidence of raised 0.15 cm wide rim at edge. Monogram appears significantly off center


description:
Pyramidal with almost square base (3.2 cm x 3.4 cm) and squared apex (1.2 cm x 1.2 cm). All edges rounded. 1.6 cm from top a 0.4 cm hole drilled through the object to opposite face


description:
Longitudinal, tongue-like object, reasonably constant thickness 1.2 cm. Both faces show signs of polish. One end fractured other well rounded. All edges smoothed and rounded


description:
Roughly circular. Heavily corroded and encrusted. No features discernible


description:
Over half fragment, heavily corroded and encrusted. One face has some evidence of 0.1 cm wide border at edge


description:
Fragment (possibly of cornice) seemingly comprising shallow concave cavetto ca 10 cm wide topped by a ca 2 cm wide fillet. One edge appears to have been roughly finished to a level surface as does "top" surface.


description:
Circular copper/copper alloy disc 2.5 cm dia, 0.2 cm thick. On one side of disc, centrally, a 0.7 cm dia, 0.4 cm high stud like projection. On other side of disc an elongated knob like projection with flat divergent sides, 1.8 cm long terminating in a rounded top. 0.5 cm from top a 0.3 cm dia hole fully pierces this element. Appears to be a rivetted furniture fitting


description:
V. heavily corroded and encrusted remnant of finger ring comprising bezel and 1.5 cm length of hoop. Bezel elliptical in plan 1.2 cm by 0.9 cm. Shoulders of hoop ca 0.3 cm at bezel, sides then convergent. Remnant of hoop bent over 180 degrees upon itself


description:
Almost complete coin; small notch <0.10 cm at circumferance which affects one face only. Both faces corroded and heavy encrustation on one. Some evidence on one face of ribbed border at edge. No other features immediately evident


description:
Length of copper/copper alloy wire or rod bent through 360 degrees to form ring. Constant diameter ca. 0.2 cm. Heavily corroded and encrusted


description:
Round head, 0.1 cm thick, encrusted and corroded. Shank projects centrally. 0.3 cm wide at head, rectangular section, 1 cm long.


description:
Fragmentary segment, very heavily corroded and encrusted. Green and white/cream corrosion product. No features visible.


description:
ca. 2/3rds of a fragment of coarse ceramic lamp. Rounded body, 5.3 cm dia, 2-6cm deep. Rounded stilted nozzle, ca 2.2 cm long, 2.2 cm wide. Reddish clay


description:
Triangular profile 4.6 cm high, base rectangular, 1.4*1.2 cm. All edges converge to rounded point. Heavily corroded and encrusted. Base area appears distorted causing slight rounding in edge profile and flattening and indentation to lower 0.6 cm of one face.


description:
Length of iron plate ca 0.2 cm thick, 3.9 cm long, ca 2.0 cm wide, bent laterally at half width to form L-shape in edge profile. Heavily encrusted and corroded


description:
Copper/copper alloy plate, 0.05 cm thick, encrusted and corroded. In end profile gently curvilinear and at one edge a thickening 0.3 cm wide, 0.1 cm thick. Appears to be fragment of circular vessel with rim.


description:
Material is sandstone. Oblong, roughly rectangular. Reasonably constant thickness ca 1.3 cm. All surfaces smothed and edges rounded.


description:
Significantly corroded and one face heavily encrusted. Other face reveals 0.1 cm wide border at edge within which are elements of a feature (monogram?). Exact form not at this stage clear. No features visible on other face. Fissuring at edge and some loss of surface material.


description:
Length of iron plate or strip with rectilinear sides convergent from width 0.9 cm to 0.55 cm. Seemingly constant thickness, 0.2 cm. Slightly distorted along the length. Heavily corroded and encrusted.


description:
Longitudinal, seemingly squarish cross-section but much material loss through corrosion. Heavily encrusted. Fragment of bar (or nail?)


description:
Irregular shaped fragment copper/copper alloy plate <0.1 cm thick. Corroded and encrusted. Distorted/bent at one corner. Material is bent through 90 degrees at another corner which may be a deliberate bend.


description:
Longitudinal rounded edge lump of copper/copper alloy, heavily corroded. Fissured; material being lost.


description:
Material is limestone aggregate. Roughly square fragment with one edge seemingly curvilinear and, opposite, apparent remnant of ciruclar hole ca 11 cm dia. One surface very rough, reverse worked flat.


description:
'L' shaped object formed from strip or cut from sheet, constant thickness 0.1 cm. One end rounded. One form 2cm long, short arm 1 cm (internal). Heavily corroded and encrusted.


description:
Fragment of copper/copper alloy bar of rectangular (0.25 x 0.1 cm) cross-section. Corroded and encrusted. Distorted along its length. At one end object twisted through ca 45 degrees and appears to be slighly wider in plan (0.3 cm) with rounded terminus.


description:
Remnant of iron rod/bar 0.7 cm long, seemingly square cross-section (0.3 cm x 0.3 cm) corroded to a bulbous mass of encrustation. Heavily corroded


description:
Fragment of bone, curved in end profile (curvature of original bone?). In one face finely incised figural decoration-winged figure. Object carefully cut around face and 2 wings; remaining edges fractured. Tip of upper wind slightly curved outwards

definition:
Fragment with incised figural decoration (inlay?) (from sample 577)


description:
Fragment of shaped copper/copper alloy bar corroded and encrusted. At one end almost triangular section with rounded "apex," 0.4 cm "base," 0.5 cm "height." After, ca 0.7 cm object becomes very clearly triangular in section, with each area developing to a 0.3 cm long point at the terminus. In plan, object has gradually divergent sides, height and base 0.7 and 0.8 cm respectively. Possibly decorating tool.


description:
Triangular fragment with one rectilinear regular edge. Upper face finished (not polished) to a flat surface. Reverse side irregular, thickness varying from 1.0cm to 2.5 cm. Other edges seemingly fractured.


description:
Roughly rectangular in plan, heavily corroded and encrusted. Possibly originally fragment of copper/copper alloy strip (or even slag).


description:
Parabolic shaped with one fractured edge. Remaining sides convergent smoothed and rounded. In end, profile flat domical. Upper ("domed") surface highly smoothed.


description:
Fragment with one gently convex curvilinear edge. One face bears a series of transverse parallel 0.4-0.5 cm wide shallow rounded mouldings. And at the end of one, a 0.7 cm dia hemispherical protrusion. In edge profile object appears slightly concave. Curvilinear in one axis, generally flat in the other.


description:
In plan long rectangular with constant width 1.8 cm paralle rectilinear sides. In side profile object appears to develop a wedge shaped trough. Rectinlinear divergent sides from a thickness of ca. 0.8cm to ca 1.5cm. Heavily corroded and encrusted.


description:
Copper/copper alloy rod or wire, carefully bent to create annular object. External dia 1.4 cm, Internal hole 0.9 cm dia. Material circular in section, 0.3 cm dia. Corroded and encrusted


description:
Longitudinal, irregular shaped along one edge in plan; opposite edge appears regular and rectilinear and rounded. 0.6 cm from the regular edge, a parallel shallow trough. In edge profile, object gently curvilinear. Opposite face masked by significant encrustation but fragment of regular edge visible revealing a width of original material of ca. 0,4 cm. heavily corroded.


description:
Fragment of copper/copper alloy wire 0.4cm dia. Curvilinear profile; circular cross-section. Heavily corroded and encrusted.


description:
2 main elements. 1.) Copper/copper alloy plate 0.1 cm thick, 4.2 cm long, bent/distorted at one end (original length ca. 4.7 cm) from narrow end (width 0.7cm). Sides diverge over 3.6 cm, through concave edges to shoulders. 2.3 cm width, then converging through rectilinear sides to a point. On one face, and perpendicular to it, 0.3cm from narrow edge, a rectangular plate. 1 * 1.1 cm high, 0.1 cm thick, longitudinally set, pierced with a 0.4cm dia hole central. Corroded and some encrustation


description:
Fragment of architrace moulded on 2 adjacent faces. 2 broad, 4.5 cm wide flat panels meet at a right angled corner. Each face then has ca 1.5 cm wide, astragal.


description:
Fragment of cornice or architrave. 2 faces flat, unmoulded meet at right angles, rounded edge - possibly related to SF 3794


description:
Less than quarter part; blue glass; gold pigment to surface (?); round section 0.6 cm


description:
Longitudinal. Original appeared to have had rectilinear sides now somewhat distorted. Seemingly convergent to rounded point. In cross section, roughly rectangular. Corroded but still responsive to magnet. Encrusted


description:
V. heavily corroded and fragmentary (1 segment separated away in bag). No detail or feature discernible


description:
Heavily corroded and encrusted. In plan triangular (base 0.6/0.7 cm; height 1.9 cm). In end section appears to be plate ca 0.1 cm thick with "blade" 0.1 cm thick perpendicular to it, all sides converging to a point arrow head fashion


description:
V. heavily corroded and encrusted. Longitudinal. At one extremity some evidence that original object in part comprised iron plate ca 0.1 - 0.15 cm thick. In cross section roughly flat oval


description:
Spherodial mass of copper/copper alloy. Heavily corroded. In one part a 1 cm long, 0.1 cm deep "gash"


description:
Fragment of copper/copper alloy plate. Distorted and bent in various places. Edges torn. Lighly encrusted. Not particularly heavily corroded.


description:
Lightly encrusted copper/copper alloy disc. No features visible whatsoever.


description:
Roughly circular, heavily corroded and encrusted. No features visible.


description:
Material is limetsone aggregate. Fragment, two thirds segment, curvilinear outer edge and part of central hole ca 6cm dia. Radius ca 18.5cm of entire stone. One face worked flat. Other face and edge roughly finished.


description:
Fragment architrave or gullion. Regular rectangular cross section. All 4 surfaces appear finished to some degree. Unadorned and plain surfaces.


description:
Polygonal fragment, 2 side roughly parallel, constant thickness 1.8cm. One face appears more highly finished/polished than other. Marks/stains of bacterial oxidation. Edges rough.


description:
Corroded and encrusted fragment of copper/copper alloy strip. Long parallel rectilinear sides, constant width 0.9 cm.


description:
Diameter is 0.15 to 0.2. Heavily encrusted. Suggestion of raised border of rim of one face. No other features discernbile.


description:
Fragment of copper/copper alloy strip with parallel rectilinear sides, width 0.6cm. Strip has become folded onto itself. Halfway along its length, folded again, for 0.4cm at the first fold. Original length of strip ca 7.5 cm. Corroded. Encrusted.


description:
Rectangular mass of copper/copper alloy, heavily corroded and encrusted. Appears possibly originally strip folded compactly and faces then corroded together.


description:
Trapezoidal in plan, section of copper/copper alloy plate. One side and long base appear to be regular rectilinear edges. Midway along the base a 0.3cm long, 0.1 cm high notch. Semi-circular in edge profile. Corroded and encrusted across all surfaces.


description:
Diameter is less than 0.05cm. 4 Fragments of copper/copper alloy strip or plate. Heavily corroded. Significant encrustations. Dimensions above are of largest fragment. Roughly rectangular with no regular sides. Other fragments are of similar material. Exact relationship between them difficult to establish. No piece has regular side/edge; all fragmented.


description:
Not fully circular. Uncertain due to corrosion and encrustation whether there has been material loss. No features discernible.


description:
Almost complete coin: 9.6 cm long; 0.1 cm deep. Segment missing at circumference. Corroded and encrusted. Evidence on both faces of raised 0.15 cm wide border at rim. Evidence of some feature to one face but detail occluded by corrosion.


description:
Material is limestone aggregate. Fragment, sector from circumference (curvilinear edge) to centre - possible radius 21.5 cm of whole object. One face worked flat. Other face and edge face roughly finished.


description:
Longitudinal remnant of timber encasing iron residue. In end section iron object is rectangular (0.5 * 0.3cm).


description:
Longitudinal, heavily corroded and encrusted. 3 pieces which fit together (dimensions above are of reconstructed object). Features reveal rectangular cross-section core (ca 1.5 * 1.0 cm). Sides converge along length to a point (nail).


description:
Fragment of fresco. Image of foliage (?). Brown, cream, orange pigments.


description:
Diameter is <0.1 - 0.1cm. Heavily corroded and encrusted fragment of copper/copper alloy strip or plate. Roughly rectangular in plan. One long side and 2 edges (parallel) appear regular. Slightly distorted in edge profile.


description:
In side profile one long rectilinear edge. Opposite edge concave curvilinear. These sides diverge from socket end 3.6cm width to axe-head end 3.8 cm width. In plan, sides converge with rectilinear sides from socket end 3.8cm width to rounded point. Fragment of 1.1cm element of socket hole visible (handle inserted perpendicular to head). Over half of socket missing together with any element formerly opposite the axe edge. Surfaces all smoothed. Socket end almost circular in cross-section.


description:
Material is limestone. Roughly circular in plan. One face plain and slightly convex creating shallow domical profile. At centre a 8cm long, 5cm wide, elliptical hole fully penetrating stone. Reverse face suffered extensive fracture damage (stone appears to have been fractured laterally). Edges rough and seemingly suffered fracture damage.


description:
Material is limestone. Very roughly square/rectangular fragment. Seemingly originally part of longitudinal element with 2 narrow parallel sides (ca 5cm wide), 10.8cm apart. One face, connected to the sides through rounded edges, roughly flat and unadorned. Opposite face has a deep 5.5cm wide, 3-4cm deep trough extending ca 4cm along the edge of the object terminating in a conch-like element. The sides and back of the trough appear to have chiselled gouges (? Whether decorative element).


description:
Roughly triangular in plan. One face finished to flat surface. No regular edges. Thickness varies from 3.8 to 3.00cm.


description:
Fragment copper/copper alloy strip or plate folded longitudinally back on itself (dimensions above are of object so formed). Thickness of material <0.05cm. No apparent regular edge. Corroded (green and black corrosion product) and encrusted.


description:
Longitudinal in plan, sides converging to rounded point in end profile flat ovaloid. At pointed edge 1cm build up of encrustation to form globular mass. Generally heavily corroded and encrusted. Original probably fragment of strip or plate.


description:
Roughly elliptical in plan. One face encrusted. Other face and total edge smooth; rounded edge.


description:
Irregular shaped. Flat fragment. Heavily corroded but still responsive to magnet. Encrustation to one "face". No surface appears to be regular. Item appears to be a flaked fragment of a larger object.


description:
Roughly circular with some material loss at circumference. Heavily corroded. Encrustations to both faces. One face appears very poorly preserved. Other seems to bear styalised beta and some evidence of 1-1.5cm wide rope or ribbed border at edge. Coin of Basil I?


description:
Fragment of object with parallel rectilinear sides 2.5cm wide. At one end a semi-circular terminus. Other end fractured. Object has reasonably constant thickness 0.3cm. In end profile slightly convex. Edges perpendicular to the sides. 1cm from edge of terminus and central a 0.8 * 0.6cm elliptical hole. At 1.5cm further along the face partial circumference of a further hole or other partially circular opening. One face decorated by series of 0.3 cm dia incised circles with centrally incised blind hole near perimeter and between the central holes.


description:
Roughly circular ceramic disc of reasonably constant thickness 1.5cm to 2.0 cm. Very coarse ware. No distinguishing features.


description:
Ellipsoidal in plan. In edge profile rectangular with rounded corners. At one end edge pierced with 3, 0.1cm dia holes 0.5cm apart. Opposite, 2, 0.1 cm dia holes. Object of the same type as SF3841. Dolphin vertebra; consumption refuse.


description:
Longitudinal with 2 rectilinear sides, one converging from width 1.3cm to the other terminating with a half round curve at a point. One long edge profile has convergent rectilinear sides (from ca 0.6cm to ca 0.2cm at point). Reverse edge is <0.05 along most of length. Flat elliptical in end cross-section. Would appear to be a single-edged bladed knife.


description:
2 fragments which appear to fit together (dimensions above are of reconstructed object). Copper/copper alloy strip 0.3cm wide, 0.05cm thick. Bent at right angles. 1.6cm from one end, a terminus where rectilinear side converge over 0.5cm to a point. At other end a 1.3-1.4cm long mass of encrustation masks the material.


description:
Heavily corroded and encrusted. Roughly arrow-head shaped in plan. Flat ovaloid in end section. No features discernible.


description:
Heavily corroded and encrusted. 0.8cm long. 0.3-0.4cm deep area of lost material at circumference. No features ascertainable.


description:
Very heavily corroded and encrusted. Appears to be section or fragment of copper/copper alloy bar or strip of indeterminate cross-section which has suffered twist damage through 90 degrees along its length. Object appeared to have rectilinear, parallel sides.


description:
Longitudinal; heavily corroded and encrusted. Long penetrating fissures. Fragmentary state. Difficult to ascertain cross-section but possibly rectangular. Fragment of nail?


description:
Heavily corroded and encrusted. No features discernible.


description:
Spheroidal, tear-drop shaped mass of heavily encrusted/corroded material. (Black and green corrosion product present). Unable to discern any regular feature.


description:
Heavily corroded and encrusted length of copper/copper alloy wire/rod 0.5cm dia. Fissured and fragmentary (2 fragments which fit. Dimensions above are of reconstructed object, but as bent/deformed). Length of rod/wire ca 11cm. Final 2cm bent round to form an elliptical eye. 1 * 0.90 cm. Remaining length has been bent/deformed at ca midpoint. At other end sides appear to converge over 1cm to rounded point. Pin (?)


description:
Heavily encrusted and corroded. Longitudinal object. At one end evidence that part of original object comprised iron plate 2cm wide, ca 0.2cm thick. Rectangular section.


description:
Both faces heavily encrusted. Visible metal corroded. No features discernible.


description:
Heavily corroded and encrusted fragment of rectangular section and apparently rectilinear sides.


description:
Heavily corroded and encrusted. Roughly long conical in appearance. No regular feature discernible


description:
Roughly oblong, flattish mass of heavily encrusted and corroded copper/copper alloy. No regular feature discernible


description:
Material is sandstone. Flat (ca 1.5cm constant width) lanceolate in plan. One face very smooth with array of cut marks. Rounded edges and smoothed sides.


description:
Copper/ copper alloy wire, circular cross section 0.2 cm dia ca 3 cm in length. Each end bent to form opposing curvilinear elements 1 cm long. At one end a thickening producing a bulbous terminus. This may be simply the effect of corrosion/encrustation - no similar "feature" on other end. Generally object heavily corroded and becoming fragmentary


description:
Length of lead bent and distorted, 11.5 cm long with flat semi-circular cross section and generally constant width 1.2 cm. Parallel rectilineal sides one end fractured, other terminates with a wider profile (ca 1.6 cm) A conical element projects from the flat face (ca 1 cm long "base", 0.8 cm high) at one edge


description:
U shaped fragment heavily corroded copper/copper alloy strip/plate. One rectilineal edge. Generally encrusted both faces.


description:
Heavily corroded iron strip ca 0.5 cm constant width ca 0.15 - 0.2 cm thick. Each end appears to have been bent through 90 degrees to form opposing elements of ca 1 cm length, the sides of one converging to a point. The other end is obscured by corrosion and encrusted stone. All heavily corroded. Staple?


description:
Fragment mullion or decorative tracery. Part curvilinear element 3.5 cm wide. Projecting from the extrados, in the same plane fragment of a second element of which insuffient to ascertain formulation other than that it bifurcates on one face. Curvilinear element has a 1.5 cm wide "v" shaped 0.5 cm deep groove second element also carries same moulding. Reverse face plain


description:
Roughly oblong fragment; Constant thickness 2 cm. 2 sides appear parallel 5 cm apart but with roughly finished edge faces. One end appears regular (though partially fractured) and meets sides at right angles. This has a rounded camfered edge profile. Other end fractured


definition:
Object taken as sample for residual analysis number 738


description:
4 fragments 2 of which do fit together - relationship of other 2 is uncertain - they appear to be of a different thickness - dimensions above are of the reconstucted pair. Other two have thickness of ca 2.8 cm. They reveal one face on which incised chisel marks. Reconstructed pair is of roughly rectangular shape with fractured edges. One polished face. The reverse face roughly finished with parallel chisel marks


description:
Roughly rectangular in plan, one long regular side and perpendicular edge. In edge profile quarter round. One face flat; reverse face gently curves to meet other face. One end has 2 cm wide shallow depression central along its length. Object appears to thicken along its length from 3 cm to 3.6 cm.


description:
Heavily corroded. One face has corroded and raised element central. No features discernible


description:
Heavily corroded and encrusted. Evidence of raised 0.1 cm wide border at rim. No other feature discernible


description:
Longitudinal with slight curvature in side elevation. Heavily corroded, encrusted and fissured. One end appears to reveal rectangular cross-section. Other end sides appear to converge to a point. End fragment of a nail?


description:
Heavily corroded and encrusted single edged knife blade tapering to a point with the back. The back slighly curves down to meet the blade. Width of back ca 0.7 cm. No evidence of tang


description:
Half diameter preserved of bone (antler?) cylinder, 2.3 cm outer dia; 1.6 cm dia inner. Outer surface polished and unadorned natural longitudinal features remain as ridges. End edges polished


description:
Black stone roughly conical: scored and chipped. Base area ca 2 cm x 1 cm flat but with well rounded edges and courners. All parts generally smoothed. Upper 1.5 cm is pinched in to one side (to aid grip ?)


description:
Roughly rectangular, one long and 2 side edges. May be regular. Heavily corroded and encrusted. Generally constant thickness (0.3 cm - 0.4 cm)


description:
Heavily corroded and encrusted; small (0.5 x 0.5 cm) chip missing at circumference. Alongside a bulge of corrossion. Raised rim on both faces. No other feature discernible


description:
Generally rectangular in one elevation and wedge shaped in another. 2 adjacent faces have highly polished areas. Other faces comparatively rough. Edges and corners rounded. Whetstone?


description:
Object comprises 2 elements both copper/copper alloy. Heavily corroded and encrusted. Section of bar, parallel rectinlinear sides with rounded corners to squared terminus. Other end obscured by encrustations but appears squared with sharp corners. Constant thickness 0.2 cm. Fused or corroded to one face and contiguous with it, a fragment of strip/plate 2.4 cm long, 1.4 cm wide, one end fractured. 0.6 cm from other end 2, 0.2 cm dia holes, 0.5 cm apart.


description:
Fragment of amphora handle 8.8 cm long, 3.9 cm wide, 2.4 cm thick. At curve of handle, set longitudinally, stamp impressed alpha delta tau phi iota


description:
Flattish roughly triangular mass of heavily corroded, encrusted material. Small squarish 0.4 cm x 0.4 cm protrusion at one corner is only apparent regular feature (possibly slag)


description:
Circular in plan, flat domical in section. Domed upper surface inscribed with Greek type cross, incised arms ca 0.1 cm wide, and deep. Each arm 0.5 cm long terminates with a 0.15 cm dia blind hole. Narrow 0.1 cm edge band


description:
Heavily corroded and encrusted "L" shaped object. Unable to ascertain any regular features. Possibly fragment 3.5 cm long of iron bar or rod 0.7 cm wide bent through ca 45 degrees


description:
V. heavily corroded and encrusted, in fragmentary state. Longitudinal seemingly with rectilinear parallel long sides. End profiles both seem wedge shaped but vary in thickness from ca 0.6 cm to 0.1 cm. Top profile suggests sides converge. May be knife


description:
Heavily corroded and encrusted. Seemingly rectangular cross section. Sides rectilinear and convergent. Fragment of nail. Object fissured


description:
Plain spherical element 1 cm dia, torn and cracked. Hole at base and on lower surface. At top 0.3 cm dia wire loop. Generally corroded across surface


description:
longitudinal, heavily encrusted and corroded, seemingly iron plate with parallel rectilinear sides, one square and one rounded terminus and reasonably constant thickness. No other features visible.


description:
fragment of handle of amphora. Stamp impressed on upper part. Stamp dimensions; 1,4 cm by 1,4 cm, 0,1 cm - 0,2 cm deep. Dimensions above are of fragment. Width of handle 3,9 cm, thickness 2,4 cm.


description:
squarish block, very heavy/ dense stone (dark) (granite?). Shaped/moulded on 3 faces to produce "U"-shape in cross section. Appears to be slight curvature to one face (covexity) suggestive fragment of curved object. One rounded edge projects beyond other.


description:
Triangular (7 cm high) on square(3,8 cm wide) base with squared apex (1,2 cm by 1,2 cm). All edges rounded. 1,2 cm from ape a 0,6 cm dia hole fully pierces object. Some scoring and chipping to surfaces. Cream colouration to surface (slip). On apex a circular and annular depression ca. 0,8 cm dia.


description:
Roughly circular dish shaped, ca. 0,3 cm thick, heavily encrusted and corroded. Within dish a mound of material unknown composition.


description:
Heavily corroded and encrusted rectangular mass with squarish cross section. No regular feature discernible


description:
Roughly triangular fragment (2.7 cm high) with rectangular cross section. Heavily corroded and encrusted. Possibly frament from a nail


description:
Long triangular in plan (2.5 cm high) with rectangular "base". Slight curvature in one plane. Heavily corroded/encrusted. Sides appear regular and rectilinear


comments:
taken from pt 1040 22JUL06B, found in SMP 724

description:
Corroded and encrusted. Metal plate constant thickness <0,05 cm, max width 0,9 cm with convergent rectilineal sides. At 1,4 cm length, fractured terminus 0,4 cm wide. At wider end sloping shoulders reduce object to strip, width of 0,3cm which bent round into circle 0,4 cm dia, lying wholly above the plane of one face.


comments:
pt taken from 1066 12JUL06B, found in SMP 635

description:
Base fragment amphora with rounded toe, 6cm dia circular cross-section. 0,8 cm thickness of vessel.

notes:
palaeobotanical sample 635 taken from bottom of this.

definition:
Bottom of amphora (palaeobotanical sample 635 was taken from this bottom)


description:
Ca. quarter preserved, rectangular in cross section, 0,5 cm by 0,3 cm, rounded edges. Plain, unadorned surface. Corroded generally on all surfaces. Dark glass.


description:
Quarter circumference preserved of bone cylinder 0,1 cm to 0,2 cm in thickness; pierced by medullary cavity. Short edges rectilinear, parallel, smooth. Diameter of article expands from ca. 1,8 cm one end to 2 cm at other. Outer surface decorated with irregular spaced 0,05 cm dia incised blind holesa and series of generally parallel transverse recesses/ grooves, some with holes. One groove traverses object in curvilinear fashion. (fragment of thimble?)


description:
Circular cross- section, pierced longitudinally by 0,15 cm dia hole. Object divided by 2 narrowlateral waists into 3, 0,4 cm long spheroidal sections each of which decorated by a series of 0,3 cm long grooves around the circumference. One end suffered fracture damage revealing dark blue colour glass.


description:
squarish in plan, flat domical in end profile encrusted and corroded mass of copper/ copper alloy. Appears to comprise (in part) fragment(s) of plate or strip <0,05 cm thick bent over/ laid one on the other.


description:
Chain of 19 links. Each link comprises figure of 8 twisted midway through 90 degrees, 0,3 cm dia thick, circular cross section, 2,1 cm long. Many links corroded together. Occassional heavy encrustations. Copper/ copper alloy.


description:
Roughly triangular in plan; heavily corroded and encrusted. At two corners evidence of plate like elements ca. 0,5 cm thick. No other regular feature.


description:
Original pyramidal in plan on square base. All of base and significant portions of lower parts of all 4 faces fractured away. Squared apex 2,1 cm by 2,1 cm. 0,7 cm from top a 0,6 cm dia hole roughly made pierces object. Cream coloured slip applied.


description:
Pyramidal on square (3.4 X 3.4 cm) Base.  Rounded apex, all edges, corners well rounded at 1.2 cm from apex.  A 0.4 cm diameter hole penetrates object.  Some scarring and chipping.  Depression in base.  Each face appears to bear a 'stripe' of creamy coloration.


description:
Solid cylindrical object of circular cross-section; long sides very slightly convergent (from 1,6 cm dia to 1,5 cm dia). Rounded termini both ends. (kiln furniture ?)


description:
Almost triangular fragment of copper/ copper alloy plate or sheet ca. 0,05 cm thickness. Several distortions/ deformations to face (giving rise to the "height" referred to above). Encrustations both faces. 2 sides appear regular and rectilinear. Others torn/ fractured.


description:
Object comprises 2 elements. A plate-like element roughly parallelogram shaped. From one end of this projects perpendicularly a 1,4 cm high, 1,3 cm wide mass. Whole is heavily encrusted and all forms are masked. Heavily corroded.


description:
triangular in plan on roughly square base. Apex squared off 2 cm by 2 cm. ca. 1,3 cm from top a 0,5 cm dia hole penetrates object. Fracture damage to part of apex, and to 3 sides at base.


description:
10 fragments of copper/ copper alloy plate ca 0.05 cm thick. 3 of them have a 0,5 cm wide, 0,1- 0,2 cm thick, thickened edge which suggests that some or all of the fragments are of some vessel with a thickened rim. All pieces corroded and encrusted. None can be readily fitted with any other piece. One piece has a curvilinear profile (its dimensions given above). 2 other pieces are roughly rectangular; 2,5 cm by 2 cm; 1,5 cm by 2,2 cm. Other pieces small, irregularly shaped.


description:
Flattish, constant thickness 0,9 cm, roughly rectangular in plan, 3 well rounded edges. Surfaces well smoothed. Some encrustations.


description:
2 elements, contiguous. A carefully worked cylindrical section 1,7 cm long, oval in cross-section (1,2 cm by 1 cm) but with a 0,7 cm wide, ca. 0,1 cm deep smoothed trough extending the length of one side. Slight entasis to shaft. At terminus a 0,8 cm deep. 0,7 cm wide slot inserted with semi- circular base. Surface smoothed and rounded. This develops to a less well worked conical element 2 cm long, roughly circular in cross-section, ca. 1 cm wide. The latter appears to be a peg to be inserted in another object and not intended to be visible.


description:
Roughly circular in plan; heavily corroded and encrusted both faces. Thickness varies from 0,7 cm to 0,3 cm. object appears to have suffered impact damage centally causing it to become deformed and fractured radially, one line of fracture close to causing the object to separate. Parts of original regular edge visible exhibiting smooth edge  and flange ca. 0,5 cm wide.


description:
Complete lamp. Upper surface decorated, at upper edge by 0,1 cm wide groove around circumference, and concave face about central ),7 cm dia hole by moulded 6-petalled floral pattern. At one end a 1,3 cm long nozzle with 1 cm dia hole. Base has 2,8 cm dia incised groove at edge (1cm wide).


description:
very heavily corroded and encrusted both faces and edge. Fissure opening up laterally along rim. Posible suggestion of raised 0,1 cm wide border at edge on one face. No other feature visible.


description:
Irregular shaped, flattish mass of copper/ copper alloy, heavily corroded aand encrusted. No regular features discernible.


# smp_cxt_cd

description:
Soil sample from room 31 East wing (content of vessel found in situ)


description:
Paleobotanical Sample from Room 31, West Wing


description:
Paleobotanical sample from Room 31, West Wing


description:
Charcoal sample/carbonized wood, Room 38


description:
Metallurgical sample, NE part of room 38


description:
Metallurgical sample, NE part of Room 38


description:
Charcoal sample from SE section of stenopos


description:
Palaeobotanical sample, SE part of room 38


description:
Metallurgical find from the eastern part of room number 33


description:
Palaeobotanical sample, fill of a drain in stenopos, 2nd portion


description:
Palaeobotanical sample, fill of a drain in Stenopos, 3rd portion


description:
Palaeobotanical sample, fill of a drain in Stenopos, 4th portion


description:
Palaeobotanical sample from well in NW side of courtyard


description:
organic material burnt on a stone room 33


description:
flotation sample from room 33 south corner


description:
organic material sample room 33 west corner


description:
flot sample (sample from a pot outside and inside)


description:
flot of pithos 1 is west corner of room 33


description:
flot of pithos 1 ( with charcoal) room 33


description:
Residue analysis sample, amphora, room 33


description:
Metallurgical sample from the Main street


description:
Architectural sample from W wing of room 31


description:
Architectural sample from E wing of room 31


description:
Palaeobotanical sample, fill of a drain in Stenopos, 1st portion


description:
Palaeobotanical sample, NW part of room 38


description:
Metallurgical sample, NW part of room 38


description:
Palaeobotanical sample from the courtyard


description:
Palaeobotanical sample, Room 31, East wing


description:
Metallurgical sample, Room 31, East Wing


description:
Metallurgical sample, NW portion of room 38


description:
Metallurgical sample, NW portion of Room 38


description:
Palaeobotanical sample, NW portion  of Room 38


description:
Metallurgical sample, NW portion of Room 38.


description:
Architectural sample, NW part of room 38


description:
Palaeobotanical sample, NW part of room 38 (from shell)


description:
Palaeobotanical sample, room 31, E. wing


description:
Palaeobotanical sample, room 31, W. wing


description:
Palaeobotanical sample from room 31 point taken from topo_p, surf_num 2 (27jun06b, pt_id 1007)


description:
Metallurgical sample, courtyard, 3rd section


description:
Charcoal sample (used to be called Wood Sample (bark) - but AS same this was a mistake)


description:
Charcoal sample from Room 38 - Check GIS as some of this sequence (404-419) has been mapped twice


description:
palaeobotanical sample from 695, room 33


description:
palaeobotanical sample, hearth 2, room 33


description:
Palaeobotanical sample from Swing room 31


description:
paleobotanical sample from pit in room 38


description:
paleobotanical sample from pit inroom 38


description:
Palaeobotanical sample, Room 38, SE portion


description:
Architectural sample, Room 31, East wing


description:
Palaeobotanical sample, Room 31, East Wing


description:
Architectural sample, Room 31, East Wing


description:
Metallurgical sample from courtyard, 3rd section


description:
Palaeobotanical sample, courtyard, 3rd section


description:
Palaeobotanical sample. East wing Room 31


description:
Palaeobotanical sample, East Wing, Room 31


description:
Architectural Sample - mortar, from courtyard


description:
Palaeobotanical sample, Area 3, Courtyard


description:
Organic sample from church - wood impregnated by iron corrosion products


description:
Metallurgical sample from Room 38, probably content of a vessel/amphora?


description:
Architectural sample from church, area between tombs 1 and 2


description:
Architectural Sample from pit in main street by SE wall of church


description:
Architectural Sample from SW wall of church, near tomb 2


description:
Architectural Sample - mudbrick, from courtyard


description:
Architectural Sample - mortar, from courtyard (this might actually be mudbrick)


