++ basename /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectSDR.sh + FUNC=projectSDR.sh ++ dirname /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectSDR.sh + scriptDir=/mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts ++ fullpath /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts + scriptDir=/mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts + svmParams=/mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigm.svm.params + '[' 5 -lt 1 ']' + lon1=-98 + shift + lat1=17 + shift + lon2=-80 + shift + lat2=31 + shift + for binFile in '$@' ++ dirname SVM05_npp_d20120711_t2014327_radiance.bin + dataDir=. ++ fullpath . + dataDir=/mnt/r5/Data/NPP/2012_07_11_193_2014 ++ echo SVM05_npp_d20120711_t2014327_radiance.bin ++ cut -d_ -f1 + prefix=SVM05 ++ echo SVM05 ++ cut -c1-3 + pre=SVM ++ echo SVM05_npp_d20120711_t2014327_radiance.bin ++ cut -d_ -f2-4 + satDateTime=npp_d20120711_t2014327 ++ ls /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lon.bin + lonMFile=/mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lon.bin ++ ls /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lat.bin + latMFile=/mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lat.bin ++ ls /mnt/r5/Data/NPP/2012_07_11_193_2014/GITCO_npp_d20120711_t2014327_lon.bin + lonIFile=/mnt/r5/Data/NPP/2012_07_11_193_2014/GITCO_npp_d20120711_t2014327_lon.bin ++ ls /mnt/r5/Data/NPP/2012_07_11_193_2014/GITCO_npp_d20120711_t2014327_lat.bin + latIFile=/mnt/r5/Data/NPP/2012_07_11_193_2014/GITCO_npp_d20120711_t2014327_lat.bin ++ tail ++ ls /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_radiance.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin + sv5File='/mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_radiance.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin' ++ tail ++ ls /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_radiance.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin + sv4File='/mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_radiance.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin' ++ tail ++ ls /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_radiance.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin + sv3File='/mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_radiance.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin' + out5=/mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin + out4=/mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin + out3=/mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin + out543=/mnt/r5/Data/NPP/2012_07_11_193_2014/SVM050403_npp_d20120711_t2014327_reg.bsq + /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigmsetlnx -I /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigm.svm.params -f -98 -F 17 -l -80 -L 31 -b /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_radiance.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin -lf /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lon.bin -LF /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lat.bin -o /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin Read params from Input file /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigm.svm.params Invalid argument /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin Input parameters: BSQ File:-b:Input Filename STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_radiance.bin Output File:-o:Output Filename STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin Map Bounds:-mb:Use Map units for bounds TOG = 0 First Longitude:-f:Upper Left DBL = -98 First Latitude:-F:Upper Left DBL = 17 Last Longitude:-l:Lower Right DBL = -80 Last Latitude:-L:Lower Right DBL = 31 X-resolution:-x:Map Units DBL = 0.0078 Y-resolution:-y:Map Units DBL = 0.0068 Map Proj:-m:GEO,UTM,TCMS/LC,TCMS/AEA,Texas_Ortho,Texas_Stereo,CUSTOM STR = geo UTM Zone:-uz:Requested Zone for UTM INT = -1 Datum:-d:Datum of Projection STR = WGS-84 Longitude File:-lf:longitude band file STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lon.bin Latitude File:-LF:latitude band file STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lat.bin Lon,Lat Bands:-lb:band numbers of lon/lat in file(s) STR = 0,0 Fill Flag:-ff:Fill empty pix:0-no 1-nn 2-wavg 3-sqwavg; <0-interp. all pixels INT = -1 Box Size:-bs:Maximum Fillbox Size INT = 5 Map Coverage:-mc:Use pixel coverage mapping: >0=if nint(in_res/out_res) > ud) 0=no <0=yes INT = 2 Bad Value:-bv:default bad value DBL = -999.7 Data Selection:-ds:comma seperated band number list STR = 0 Dimension Mappings:-dm:use : for dim separator STR = 1,1,0:2,1,0 Geocentric Input:-gc:Map Units TOG = 0 BSQ File = /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_radiance.bin Unable to read byte order default is INTEL 0 list not set Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Available Datafields: 0: SVM05radiance Selected BSQ Bands: 0 Unable to read byte order default is INTEL 0 Geofield Dimensions: 1: height 838 2: width 3200 Using User Input for Mapping of Geofields to Datafields Datafield 0 height 838: 1,1,0 from input parameter width 3200: 2,1,0 from input parameter Scene Bounds -91.598175x25.867895 -121.2908x21.399265 -92.250534x31.272148 -123.35249x26.591944 requested llBounds -98 31 -80 17 Mapbounds -98 17 -80 31 newllbounds -98 17 -80 31 Swath Center Resolution 0.0078292x0.00671038 degrees or 0.0078292x0.00671038 map units Requested Map Resolution 0.0078x0.0068 map units Not using pixel coverage deltas Output dims: 2308 pixels by 2059 lines subbounds -98x31 -80x31 -98x17 -80x17 subdims 837x502 797x0 0x730 0x0 dimbounds: 0 0 837 730 Binning from 0x0 to 837x730 Mapping Pixel coordinates Line 0,640: -98.0076x25.4539 Line 100,619: -98.0002x26.132 Line 200,602: -98.0032x26.8075 Line 300,585: -98.0033x27.4834 Line 400,568: -98.0008x28.0973 Line 500,552: -98.0012x28.7722 Line 600,537: -98.0037x29.4471 Line 700,522: -98.0047x30.1222 Line 800,507: -98.0027x30.7302 list not set Gridding Datafield 0.0 to Band 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Line 0 Line 100 Line 200 Line 300 Line 400 Line 500 Line 600 Line 700 Line 800 Line 900 Line 1000 Line 1100 Line 1200 Line 1300 Line 1400 Line 1500 Line 1600 Line 1700 Line 1800 Line 1900 Line 2000 grid->sdata[0].sdata[250]:-29380 Writing grid band 0 to /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin Now Free Stuff Swath deconstructor + /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigmsetlnx -I /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigm.svm.params -f -98 -F 17 -l -80 -L 31 -b /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_radiance.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin -lf /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lon.bin -LF /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lat.bin -o /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin Read params from Input file /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigm.svm.params Invalid argument /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin Input parameters: BSQ File:-b:Input Filename STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_radiance.bin Output File:-o:Output Filename STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin Map Bounds:-mb:Use Map units for bounds TOG = 0 First Longitude:-f:Upper Left DBL = -98 First Latitude:-F:Upper Left DBL = 17 Last Longitude:-l:Lower Right DBL = -80 Last Latitude:-L:Lower Right DBL = 31 X-resolution:-x:Map Units DBL = 0.0078 Y-resolution:-y:Map Units DBL = 0.0068 Map Proj:-m:GEO,UTM,TCMS/LC,TCMS/AEA,Texas_Ortho,Texas_Stereo,CUSTOM STR = geo UTM Zone:-uz:Requested Zone for UTM INT = -1 Datum:-d:Datum of Projection STR = WGS-84 Longitude File:-lf:longitude band file STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lon.bin Latitude File:-LF:latitude band file STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lat.bin Lon,Lat Bands:-lb:band numbers of lon/lat in file(s) STR = 0,0 Fill Flag:-ff:Fill empty pix:0-no 1-nn 2-wavg 3-sqwavg; <0-interp. all pixels INT = -1 Box Size:-bs:Maximum Fillbox Size INT = 5 Map Coverage:-mc:Use pixel coverage mapping: >0=if nint(in_res/out_res) > ud) 0=no <0=yes INT = 2 Bad Value:-bv:default bad value DBL = -999.7 Data Selection:-ds:comma seperated band number list STR = 0 Dimension Mappings:-dm:use : for dim separator STR = 1,1,0:2,1,0 Geocentric Input:-gc:Map Units TOG = 0 BSQ File = /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_radiance.bin Unable to read byte order default is INTEL 0 list not set Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Available Datafields: 0: SVM04radiance Selected BSQ Bands: 0 Unable to read byte order default is INTEL 0 Geofield Dimensions: 1: height 838 2: width 3200 Using User Input for Mapping of Geofields to Datafields Datafield 0 height 838: 1,1,0 from input parameter width 3200: 2,1,0 from input parameter Scene Bounds -91.598175x25.867895 -121.2908x21.399265 -92.250534x31.272148 -123.35249x26.591944 requested llBounds -98 31 -80 17 Mapbounds -98 17 -80 31 newllbounds -98 17 -80 31 Swath Center Resolution 0.0078292x0.00671038 degrees or 0.0078292x0.00671038 map units Requested Map Resolution 0.0078x0.0068 map units Not using pixel coverage deltas Output dims: 2308 pixels by 2059 lines subbounds -98x31 -80x31 -98x17 -80x17 subdims 837x502 797x0 0x730 0x0 dimbounds: 0 0 837 730 Binning from 0x0 to 837x730 Mapping Pixel coordinates Line 0,640: -98.0076x25.4539 Line 100,619: -98.0002x26.132 Line 200,602: -98.0032x26.8075 Line 300,585: -98.0033x27.4834 Line 400,568: -98.0008x28.0973 Line 500,552: -98.0012x28.7722 Line 600,537: -98.0037x29.4471 Line 700,522: -98.0047x30.1222 Line 800,507: -98.0027x30.7302 list not set Gridding Datafield 0.0 to Band 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Line 0 Line 100 Line 200 Line 300 Line 400 Line 500 Line 600 Line 700 Line 800 Line 900 Line 1000 Line 1100 Line 1200 Line 1300 Line 1400 Line 1500 Line 1600 Line 1700 Line 1800 Line 1900 Line 2000 grid->sdata[0].sdata[250]:-30577 Writing grid band 0 to /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin Now Free Stuff Swath deconstructor + /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigmsetlnx -I /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigm.svm.params -f -98 -F 17 -l -80 -L 31 -b /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_radiance.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin -lf /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lon.bin -LF /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lat.bin -o /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin Read params from Input file /mnt/r4/Software/IDL_WORKDIR/NPPProcessing/scripts/projectigm.svm.params Invalid argument /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin Input parameters: BSQ File:-b:Input Filename STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_radiance.bin Output File:-o:Output Filename STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin Map Bounds:-mb:Use Map units for bounds TOG = 0 First Longitude:-f:Upper Left DBL = -98 First Latitude:-F:Upper Left DBL = 17 Last Longitude:-l:Lower Right DBL = -80 Last Latitude:-L:Lower Right DBL = 31 X-resolution:-x:Map Units DBL = 0.0078 Y-resolution:-y:Map Units DBL = 0.0068 Map Proj:-m:GEO,UTM,TCMS/LC,TCMS/AEA,Texas_Ortho,Texas_Stereo,CUSTOM STR = geo UTM Zone:-uz:Requested Zone for UTM INT = -1 Datum:-d:Datum of Projection STR = WGS-84 Longitude File:-lf:longitude band file STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lon.bin Latitude File:-LF:latitude band file STR = /mnt/r5/Data/NPP/2012_07_11_193_2014/GMTCO_npp_d20120711_t2014327_lat.bin Lon,Lat Bands:-lb:band numbers of lon/lat in file(s) STR = 0,0 Fill Flag:-ff:Fill empty pix:0-no 1-nn 2-wavg 3-sqwavg; <0-interp. all pixels INT = -1 Box Size:-bs:Maximum Fillbox Size INT = 5 Map Coverage:-mc:Use pixel coverage mapping: >0=if nint(in_res/out_res) > ud) 0=no <0=yes INT = 2 Bad Value:-bv:default bad value DBL = -999.7 Data Selection:-ds:comma seperated band number list STR = 0 Dimension Mappings:-dm:use : for dim separator STR = 1,1,0:2,1,0 Geocentric Input:-gc:Map Units TOG = 0 BSQ File = /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_radiance.bin Unable to read byte order default is INTEL 0 list not set Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Available Datafields: 0: SVM03radiance Selected BSQ Bands: 0 Unable to read byte order default is INTEL 0 Geofield Dimensions: 1: height 838 2: width 3200 Using User Input for Mapping of Geofields to Datafields Datafield 0 height 838: 1,1,0 from input parameter width 3200: 2,1,0 from input parameter Scene Bounds -91.598175x25.867895 -121.2908x21.399265 -92.250534x31.272148 -123.35249x26.591944 requested llBounds -98 31 -80 17 Mapbounds -98 17 -80 31 newllbounds -98 17 -80 31 Swath Center Resolution 0.0078292x0.00671038 degrees or 0.0078292x0.00671038 map units Requested Map Resolution 0.0078x0.0068 map units Not using pixel coverage deltas Output dims: 2308 pixels by 2059 lines subbounds -98x31 -80x31 -98x17 -80x17 subdims 837x502 797x0 0x730 0x0 dimbounds: 0 0 837 730 Binning from 0x0 to 837x730 Mapping Pixel coordinates Line 0,640: -98.0076x25.4539 Line 100,619: -98.0002x26.132 Line 200,602: -98.0032x26.8075 Line 300,585: -98.0033x27.4834 Line 400,568: -98.0008x28.0973 Line 500,552: -98.0012x28.7722 Line 600,537: -98.0037x29.4471 Line 700,522: -98.0047x30.1222 Line 800,507: -98.0027x30.7302 list not set Gridding Datafield 0.0 to Band 0 Unable to read byte order default is INTEL 0 Unable to read byte order default is INTEL 0 Line 0 Line 100 Line 200 Line 300 Line 400 Line 500 Line 600 Line 700 Line 800 Line 900 Line 1000 Line 1100 Line 1200 Line 1300 Line 1400 Line 1500 Line 1600 Line 1700 Line 1800 Line 1900 Line 2000 grid->sdata[0].sdata[250]:-27113 Writing grid band 0 to /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin Now Free Stuff Swath deconstructor + cat /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin + sed 's,bands = 1,bands = 3,' + sed 's,nbands 1,nbands 3,' + sed -n '/ESRI/,/band names/p' /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin.hdr ++ basename /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM05_npp_d20120711_t2014327_reg.bin .bin + echo SVM05_npp_d20120711_t2014327_reg, ++ basename /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM04_npp_d20120711_t2014327_reg.bin .bin + echo SVM04_npp_d20120711_t2014327_reg, ++ basename /mnt/r5/Data/NPP/2012_07_11_193_2014/SVM03_npp_d20120711_t2014327_reg.bin .bin + echo 'SVM03_npp_d20120711_t2014327_reg}' + echo 'data gain values= { 1, 1, 1 }' + echo 'data offset values= { 0, 0, 0 }' + echo 'data minimum values= { -1e+100, -1e+100, -1e+100 }' + echo 'data maximum values= { 1e+100, 1e+100, 1e+100 }' + echo 'data ignore value= { -999.7, -999.7, -999.7 }'